* Re: [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM [not found] ` <47E395C9.6050201@qumranet.com> @ 2008-03-21 19:44 ` Hollis Blanchard 2008-03-25 16:56 ` Avi Kivity 0 siblings, 1 reply; 6+ messages in thread From: Hollis Blanchard @ 2008-03-21 19:44 UTC (permalink / raw) To: Avi Kivity; +Cc: kvm-devel, kvm-ppc-devel, EHRHARDT, jeroney, arnd On Fri, 2008-03-21 at 13:02 +0200, Avi Kivity wrote: > Other than that, and the few minor comments that popped up, this > (very > nice) patchset will be very easy to merge. IIRC you mentioned it is > possible for me to get an s390 account; this will be very useful in > avoiding breaking this port, as happens quite often with ppc and > ia64. > I'd like to be able to do both build and run testing. As for building the PowerPC code, cross-compiling is easy with http://kegel.com/crosstool . There are also a number of servers offering remote PowerPC ssh access: see http://penguinppc.org/dev/#remote . For run testing, we are only working on 440 host support right now, so you would need a board like the Sequoia (https://www.em.avnet.com/evk/home/0,1719,RID%253D0%2526CID%253D37101% 2526CCD%253DUSA%2526SID%253D32214%2526DID%253DDF2%2526LID%253D32232% 2526BID%253DDF2%2526CTP%253DEVK,00.html). In the future we should be able to run 440 guests on e.g. POWER5 hosts, but we've already got our hands full without that. -- Hollis Blanchard IBM Linux Technology Center ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ kvm-ppc-devel mailing list kvm-ppc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM 2008-03-21 19:44 ` [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM Hollis Blanchard @ 2008-03-25 16:56 ` Avi Kivity 2008-03-25 18:18 ` Hollis Blanchard 2008-03-25 18:21 ` Jerone Young 0 siblings, 2 replies; 6+ messages in thread From: Avi Kivity @ 2008-03-25 16:56 UTC (permalink / raw) To: Hollis Blanchard; +Cc: kvm-devel, kvm-ppc-devel, EHRHARDT, jeroney, arnd Hollis Blanchard wrote: > On Fri, 2008-03-21 at 13:02 +0200, Avi Kivity wrote: > >> Other than that, and the few minor comments that popped up, this >> (very >> nice) patchset will be very easy to merge. IIRC you mentioned it is >> possible for me to get an s390 account; this will be very useful in >> avoiding breaking this port, as happens quite often with ppc and >> ia64. >> I'd like to be able to do both build and run testing. >> > > As for building the PowerPC code, cross-compiling is easy with > http://kegel.com/crosstool . There are also a number of servers offering > remote PowerPC ssh access: see http://penguinppc.org/dev/#remote . > > I now have a ppc account. Once you point me at the ppc kernel repo I can start build testing. -- error compiling committee.c: too many arguments to function ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ kvm-ppc-devel mailing list kvm-ppc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM 2008-03-25 16:56 ` Avi Kivity @ 2008-03-25 18:18 ` Hollis Blanchard 2008-03-25 18:21 ` Jerone Young 1 sibling, 0 replies; 6+ messages in thread From: Hollis Blanchard @ 2008-03-25 18:18 UTC (permalink / raw) To: Avi Kivity; +Cc: kvm-devel, kvm-ppc-devel On Tue, 2008-03-25 at 18:56 +0200, Avi Kivity wrote: > Hollis Blanchard wrote: > > On Fri, 2008-03-21 at 13:02 +0200, Avi Kivity wrote: > > > >> Other than that, and the few minor comments that popped up, this > >> (very > >> nice) patchset will be very easy to merge. IIRC you mentioned it is > >> possible for me to get an s390 account; this will be very useful in > >> avoiding breaking this port, as happens quite often with ppc and > >> ia64. > >> I'd like to be able to do both build and run testing. > >> > > > > As for building the PowerPC code, cross-compiling is easy with > > http://kegel.com/crosstool . There are also a number of servers offering > > remote PowerPC ssh access: see http://penguinppc.org/dev/#remote . > > I now have a ppc account. Once you point me at the ppc kernel repo I > can start build testing. % cd kvm.git % curl http://penguinppc.org/~hollisb/kvm/kvmppc.mbox | git-am That directory also contains "tip", which tells you what upstream changeset the patchqueue is based on. -- Hollis Blanchard IBM Linux Technology Center ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ kvm-ppc-devel mailing list kvm-ppc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM 2008-03-25 16:56 ` Avi Kivity 2008-03-25 18:18 ` Hollis Blanchard @ 2008-03-25 18:21 ` Jerone Young 2008-03-25 18:23 ` Jerone Young 1 sibling, 1 reply; 6+ messages in thread From: Jerone Young @ 2008-03-25 18:21 UTC (permalink / raw) To: Avi Kivity Cc: kvm-ppc-devel, EHRHARDT, Hollis Blanchard, arnd, kvm-devel, jeroney So it's actually really easy using cross compiler to build everything. I use my laptop and then copy over to our nfs root that our boards use. Here are some instructions I wrote up for someone earlier. Excuse the <fill me> parts but it is enough to get you going: On Tue, 2008-03-25 at 18:56 +0200, Avi Kivity wrote: > Hollis Blanchard wrote: > > On Fri, 2008-03-21 at 13:02 +0200, Avi Kivity wrote: > > > >> Other than that, and the few minor comments that popped up, this > >> (very > >> nice) patchset will be very easy to merge. IIRC you mentioned it is > >> possible for me to get an s390 account; this will be very useful in > >> avoiding breaking this port, as happens quite often with ppc and > >> ia64. > >> I'd like to be able to do both build and run testing. > >> > > > > As for building the PowerPC code, cross-compiling is easy with > > http://kegel.com/crosstool . There are also a number of servers offering > > remote PowerPC ssh access: see http://penguinppc.org/dev/#remote . > > > > > > I now have a ppc account. Once you point me at the ppc kernel repo I > can start build testing. > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ kvm-ppc-devel mailing list kvm-ppc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM 2008-03-25 18:21 ` Jerone Young @ 2008-03-25 18:23 ` Jerone Young 2008-03-26 16:40 ` Avi Kivity 0 siblings, 1 reply; 6+ messages in thread From: Jerone Young @ 2008-03-25 18:23 UTC (permalink / raw) To: Avi Kivity Cc: kvm-ppc-devel, EHRHARDT, Hollis Blanchard, arnd, kvm-devel, jeroney * Sorry was going for paste, and somehow hit send. So it's actually really easy using cross compiler to build everything. I use my laptop and then copy over to our nfs root that our boards use. Here are some instructions I wrote up for someone earlier. Excuse the <fill me> parts but it is enough to get you going: This is a run through of how to build kvmppc kernel & kvm-userspace You will need (all will have info how to get and install): - cross tools - zlib - Linux kernel with KVM powerpc patches - kvm-userspace tools 1) Grabbing need tools =========== 1a) Cross Tools ---------------- - If you are running on an x86 based machine you need these tools - cross tools can be found at: http://www.kegel.com/crosstool/crosstool-0.43.tar.gz Installation ------------ - Untar tarball and go into folder - If you are using Ubuntu linux .. replace /bin/sh symlink: sudo ln -sf /bin/bash /bin/sh - As root, create folder /opt/crosstool. Then change the permissions to allow everyone write access..this can be done by running: "chmod 777 /opt/crosstool" - As a normal user run: ./demo-powerpc-405.sh - Once done you should have directory in that is something like: /opt/crosstool/gcc-<version>-glibc-<version> - Now you want to add the bin direcotry to your $PATH /opt/crosstool/gcc-<version>-glibc-<version>/powerpc-405-linux-gnu/bin - Done 1b) Zlib ---------------- - Now you need to compile a version of Zlib for powerpc - This will be used when building qemu while building kvm-userspace - zlib source can be found at: http://www.zlib.net/zlib-1.2.3.tar.gz Installation ------------ - Untar tarball and go into folder - Type the following in the follwoing. type in: CC=powerpc405-linux-gnu-gcc ./configure - The run: make - DO NOT INSTALL - You will now want to keep this directory around for later. 1c) Linux kernel with KVM PPC ----------------------------- - Currently patches are not upstream yet. You will need to get source from Hollis Blanchard or myself 1d) Kvm-userspace ------------------ - You will need to get the bleeding edge latest version of kvm-userspace tools to work for powerpc. - To get these you will have to grab them from the git repository. - You must first install git tools that can be found here: http://git.or.cz/ - Now you can grab the folder by running the command: git clone git://git.kernel.org/pub/scm/virt/kvm/kvm-userspace.git 2) Compiling Linux Kernel with kvm powerpc ===================== - Untar and go into directory 2a) Compiling a host kernel --------------------------- - You will first need to copy over the default configuration for the board you are running on. -For 440EP Bamboo: cp arch/powerpc/configs/bamboo_defconfig .config -For 440EPx Sequioa: cp arch/powerpc/configs/sequoia_defconfig .config - Now go into the menuconfiguration with the follwoing command: make ARCH=powerpc CROSS_COMPILE=powerpc405-linux-gnu- menuconfig - Once in menu, enable menu option "Virtualization" - Then enable Virtualization->Kernel-based Virtual Machine (KVM) support - Also enable Virtualization->KVM guest support for PowerPC 440 - Save configuration - Now to compile your kernel -For 440EP Bamboo: - make ARCH=powerpc CROSS_COMPILE=powerpc405-linux-gnu- treeImage -For 440EPx Sequioa: - make ARCH=powerpc CROSS_COMPILE=powerpc440-linux-gnu- cuImage - Once compilation is done you will find kernel in proper format in arch/powerpc/boot/ -For 440EP Bamboo it will be "treeImage" -For 440EPx Sequioa it will be "cuImage" 2b) Compiling a guest kernel for KVM ------------------------------------ - <will fill in, this is in the process of changing> 3) Builing kvm-userspace ------------------------------------ - you will need a zlib compiled for powerpc - you will need a complied copy of Linux kernel with kvm powerpc 3a) Compiling kvm-userspace --------------------------- - Go into kvm-userspace directory - To configure kvm-userspace you need to run the follwing command. NOTE to fill in areas where there is <?>: ./configure --arch=powerpc --cross-prefix=powerpc-405-linux-gnu- \ --with-patched-kernel --kerneldir=<compiled Linux kernel dir> \ --disable-sdl --disable-vnc-tls --disable-gfx-check --disable-gcc-check \ --qemu-cflags="-I<zlib dir> -I<compile Linux kernel dir>" \ --qemu-ldflags="-L<zlib dir>" \ --disable-cpu-emulation - Run make - Once done you can grab the binary for qemu in: qemu/ppcemb-softmmu/qemu-system-ppcemb - This is the binary to use. <will fill this in more, but again things are changing> 4) Running the code ========= 4a) Load kernel module & setup device node ------------------------------------------ <fill in> 4b) Running qemu ----------------- <fill in> > > On Tue, 2008-03-25 at 18:56 +0200, Avi Kivity wrote: > > Hollis Blanchard wrote: > > > On Fri, 2008-03-21 at 13:02 +0200, Avi Kivity wrote: > > > > > >> Other than that, and the few minor comments that popped up, this > > >> (very > > >> nice) patchset will be very easy to merge. IIRC you mentioned it is > > >> possible for me to get an s390 account; this will be very useful in > > >> avoiding breaking this port, as happens quite often with ppc and > > >> ia64. > > >> I'd like to be able to do both build and run testing. > > >> > > > > > > As for building the PowerPC code, cross-compiling is easy with > > > http://kegel.com/crosstool . There are also a number of servers offering > > > remote PowerPC ssh access: see http://penguinppc.org/dev/#remote . > > > > > > > > > > I now have a ppc account. Once you point me at the ppc kernel repo I > > can start build testing. > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ kvm-ppc-devel mailing list kvm-ppc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM 2008-03-25 18:23 ` Jerone Young @ 2008-03-26 16:40 ` Avi Kivity 0 siblings, 0 replies; 6+ messages in thread From: Avi Kivity @ 2008-03-26 16:40 UTC (permalink / raw) To: jyoung5; +Cc: kvm-ppc-devel, EHRHARDT, Hollis Blanchard, arnd, kvm-devel, jeroney Jerone Young wrote: > * Sorry was going for paste, and somehow hit send. > > The earlier post looked much simpler. > So it's actually really easy using cross compiler to build everything. I > use my laptop and then copy over to our nfs root that our boards use. > > Here are some instructions I wrote up for someone earlier. Excuse the > <fill me> parts but it is enough to get you going: > > This is a run through of how to build kvmppc kernel & kvm-userspace > > [snip huge howto] Since I have a ppc account, I'll just build on that. Once we support server-class hosts, I may do run testing with qemu. -- error compiling committee.c: too many arguments to function ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ kvm-ppc-devel mailing list kvm-ppc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kvm-ppc-devel ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-03-26 16:40 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1206030270.6690.51.camel@cotte.boeblingen.de.ibm.com>
[not found] ` <47E395C9.6050201@qumranet.com>
2008-03-21 19:44 ` [kvm-ppc-devel] [kvm-devel] buliding and testing PowerPC KVM Hollis Blanchard
2008-03-25 16:56 ` Avi Kivity
2008-03-25 18:18 ` Hollis Blanchard
2008-03-25 18:21 ` Jerone Young
2008-03-25 18:23 ` Jerone Young
2008-03-26 16:40 ` Avi Kivity
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox