From: Alexander Graf <agraf@suse.de>
To: "kvm@vger.kernel.org mailing list" <kvm@vger.kernel.org>
Cc: kvm-ppc@vger.kernel.org, Gleb Natapov <gleb@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Paul Mackerras <paulus@samba.org>
Subject: [PULL 10/51] KVM: PPC: Book3S HV: Store LPCR value for each virtual core
Date: Thu, 31 Oct 2013 22:17:55 +0100 [thread overview]
Message-ID: <1383254316-11243-11-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1383254316-11243-1-git-send-email-agraf@suse.de>
From: Paul Mackerras <paulus@samba.org>
This adds the ability to have a separate LPCR (Logical Partitioning
Control Register) value relating to a guest for each virtual core,
rather than only having a single value for the whole VM. This
corresponds to what real POWER hardware does, where there is a LPCR
per CPU thread but most of the fields are required to have the same
value on all active threads in a core.
The per-virtual-core LPCR can be read and written using the
GET/SET_ONE_REG interface. Userspace can can only modify the
following fields of the LPCR value:
DPFD Default prefetch depth
ILE Interrupt little-endian
TC Translation control (secondary HPT hash group search disable)
We still maintain a per-VM default LPCR value in kvm->arch.lpcr, which
contains bits relating to memory management, i.e. the Virtualized
Partition Memory (VPM) bits and the bits relating to guest real mode.
When this default value is updated, the update needs to be propagated
to the per-vcore values, so we add a kvmppc_update_lpcr() helper to do
that.
Signed-off-by: Paul Mackerras <paulus@samba.org>
[agraf: fix whitespace]
Signed-off-by: Alexander Graf <agraf@suse.de>
---
Documentation/virtual/kvm/api.txt | 1 +
arch/powerpc/include/asm/kvm_book3s.h | 2 +
arch/powerpc/include/asm/kvm_host.h | 1 +
arch/powerpc/include/asm/reg.h | 3 ++
arch/powerpc/include/uapi/asm/kvm.h | 1 +
arch/powerpc/kernel/asm-offsets.c | 1 +
arch/powerpc/kvm/book3s_64_mmu_hv.c | 5 +--
arch/powerpc/kvm/book3s_hv.c | 73 +++++++++++++++++++++++++++------
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 5 ++-
9 files changed, 75 insertions(+), 17 deletions(-)
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 26fc373..387f4c7 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1835,6 +1835,7 @@ registers, find a list below:
PPC | KVM_REG_PPC_PID | 64
PPC | KVM_REG_PPC_ACOP | 64
PPC | KVM_REG_PPC_VRSAVE | 32
+ PPC | KVM_REG_PPC_LPCR | 64
PPC | KVM_REG_PPC_TM_GPR0 | 64
...
PPC | KVM_REG_PPC_TM_GPR31 | 64
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index fa19e2f..14a4741 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -172,6 +172,8 @@ extern long kvmppc_do_h_remove(struct kvm *kvm, unsigned long flags,
unsigned long *hpret);
extern long kvmppc_hv_get_dirty_log(struct kvm *kvm,
struct kvm_memory_slot *memslot, unsigned long *map);
+extern void kvmppc_update_lpcr(struct kvm *kvm, unsigned long lpcr,
+ unsigned long mask);
extern void kvmppc_entry_trampoline(void);
extern void kvmppc_hv_entry_trampoline(void);
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index e4d67a6..6eabffc 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -290,6 +290,7 @@ struct kvmppc_vcore {
u64 preempt_tb;
struct kvm_vcpu *runner;
u64 tb_offset; /* guest timebase - host timebase */
+ ulong lpcr;
};
#define VCORE_ENTRY_COUNT(vc) ((vc)->entry_exit_count & 0xff)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fd4db15..4bec4df 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -284,6 +284,7 @@
#define LPCR_ISL (1ul << (63-2))
#define LPCR_VC_SH (63-2)
#define LPCR_DPFD_SH (63-11)
+#define LPCR_DPFD (7ul << LPCR_DPFD_SH)
#define LPCR_VRMASD (0x1ful << (63-16))
#define LPCR_VRMA_L (1ul << (63-12))
#define LPCR_VRMA_LP0 (1ul << (63-15))
@@ -300,6 +301,7 @@
#define LPCR_PECE2 0x00001000 /* machine check etc can cause exit */
#define LPCR_MER 0x00000800 /* Mediated External Exception */
#define LPCR_MER_SH 11
+#define LPCR_TC 0x00000200 /* Translation control */
#define LPCR_LPES 0x0000000c
#define LPCR_LPES0 0x00000008 /* LPAR Env selector 0 */
#define LPCR_LPES1 0x00000004 /* LPAR Env selector 1 */
@@ -421,6 +423,7 @@
#define HID4_RMLS2_SH (63 - 2) /* Real mode limit bottom 2 bits */
#define HID4_LPID5_SH (63 - 6) /* partition ID bottom 4 bits */
#define HID4_RMOR_SH (63 - 22) /* real mode offset (16 bits) */
+#define HID4_RMOR (0xFFFFul << HID4_RMOR_SH)
#define HID4_LPES1 (1 << (63-57)) /* LPAR env. sel. bit 1 */
#define HID4_RMLS0_SH (63 - 58) /* Real mode limit top bit */
#define HID4_LPID1_SH 0 /* partition ID top 2 bits */
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index b98bf3f..e42127d 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -533,6 +533,7 @@ struct kvm_get_htab_header {
#define KVM_REG_PPC_ACOP (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb3)
#define KVM_REG_PPC_VRSAVE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb4)
+#define KVM_REG_PPC_LPCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb5)
/* Transactional Memory checkpointed state:
* This is all GPRs, all VSX regs and a subset of SPRs
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 34d63d8..fd7513f 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -524,6 +524,7 @@ int main(void)
DEFINE(VCORE_IN_GUEST, offsetof(struct kvmppc_vcore, in_guest));
DEFINE(VCORE_NAPPING_THREADS, offsetof(struct kvmppc_vcore, napping_threads));
DEFINE(VCORE_TB_OFFSET, offsetof(struct kvmppc_vcore, tb_offset));
+ DEFINE(VCORE_LPCR, offsetof(struct kvmppc_vcore, lpcr));
DEFINE(VCPU_SVCPU, offsetof(struct kvmppc_vcpu_book3s, shadow_vcpu) -
offsetof(struct kvmppc_vcpu_book3s, vcpu));
DEFINE(VCPU_SLB_E, offsetof(struct kvmppc_slb, orige));
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 043eec8..ccb89a0 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -1512,9 +1512,8 @@ static ssize_t kvm_htab_write(struct file *file, const char __user *buf,
kvm->arch.vrma_slb_v = senc | SLB_VSID_B_1T |
(VRMA_VSID << SLB_VSID_SHIFT_1T);
- lpcr = kvm->arch.lpcr & ~LPCR_VRMASD;
- lpcr |= senc << (LPCR_VRMASD_SH - 4);
- kvm->arch.lpcr = lpcr;
+ lpcr = senc << (LPCR_VRMASD_SH - 4);
+ kvmppc_update_lpcr(kvm, lpcr, LPCR_VRMASD);
rma_setup = 1;
}
++i;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index a010aa4..36eb95c 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -195,7 +195,7 @@ void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
pr_err(" ESID = %.16llx VSID = %.16llx\n",
vcpu->arch.slb[r].orige, vcpu->arch.slb[r].origv);
pr_err("lpcr = %.16lx sdr1 = %.16lx last_inst = %.8x\n",
- vcpu->kvm->arch.lpcr, vcpu->kvm->arch.sdr1,
+ vcpu->arch.vcore->lpcr, vcpu->kvm->arch.sdr1,
vcpu->arch.last_inst);
}
@@ -723,6 +723,21 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
return 0;
}
+static void kvmppc_set_lpcr(struct kvm_vcpu *vcpu, u64 new_lpcr)
+{
+ struct kvmppc_vcore *vc = vcpu->arch.vcore;
+ u64 mask;
+
+ spin_lock(&vc->lock);
+ /*
+ * Userspace can only modify DPFD (default prefetch depth),
+ * ILE (interrupt little-endian) and TC (translation control).
+ */
+ mask = LPCR_DPFD | LPCR_ILE | LPCR_TC;
+ vc->lpcr = (vc->lpcr & ~mask) | (new_lpcr & mask);
+ spin_unlock(&vc->lock);
+}
+
int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
{
int r = 0;
@@ -805,6 +820,9 @@ int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
case KVM_REG_PPC_TB_OFFSET:
*val = get_reg_val(id, vcpu->arch.vcore->tb_offset);
break;
+ case KVM_REG_PPC_LPCR:
+ *val = get_reg_val(id, vcpu->arch.vcore->lpcr);
+ break;
default:
r = -EINVAL;
break;
@@ -909,6 +927,9 @@ int kvmppc_set_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val)
vcpu->arch.vcore->tb_offset =
ALIGN(set_reg_val(id, *val), 1UL << 24);
break;
+ case KVM_REG_PPC_LPCR:
+ kvmppc_set_lpcr(vcpu, set_reg_val(id, *val));
+ break;
default:
r = -EINVAL;
break;
@@ -969,6 +990,7 @@ struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
spin_lock_init(&vcore->lock);
init_waitqueue_head(&vcore->wq);
vcore->preempt_tb = TB_NIL;
+ vcore->lpcr = kvm->arch.lpcr;
}
kvm->arch.vcores[core] = vcore;
kvm->arch.online_vcores++;
@@ -1758,6 +1780,32 @@ void kvmppc_core_commit_memory_region(struct kvm *kvm,
}
}
+/*
+ * Update LPCR values in kvm->arch and in vcores.
+ * Caller must hold kvm->lock.
+ */
+void kvmppc_update_lpcr(struct kvm *kvm, unsigned long lpcr, unsigned long mask)
+{
+ long int i;
+ u32 cores_done = 0;
+
+ if ((kvm->arch.lpcr & mask) == lpcr)
+ return;
+
+ kvm->arch.lpcr = (kvm->arch.lpcr & ~mask) | lpcr;
+
+ for (i = 0; i < KVM_MAX_VCORES; ++i) {
+ struct kvmppc_vcore *vc = kvm->arch.vcores[i];
+ if (!vc)
+ continue;
+ spin_lock(&vc->lock);
+ vc->lpcr = (vc->lpcr & ~mask) | lpcr;
+ spin_unlock(&vc->lock);
+ if (++cores_done >= kvm->arch.online_vcores)
+ break;
+ }
+}
+
static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
{
int err = 0;
@@ -1766,7 +1814,8 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
unsigned long hva;
struct kvm_memory_slot *memslot;
struct vm_area_struct *vma;
- unsigned long lpcr, senc;
+ unsigned long lpcr = 0, senc;
+ unsigned long lpcr_mask = 0;
unsigned long psize, porder;
unsigned long rma_size;
unsigned long rmls;
@@ -1831,9 +1880,9 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
senc = slb_pgsize_encoding(psize);
kvm->arch.vrma_slb_v = senc | SLB_VSID_B_1T |
(VRMA_VSID << SLB_VSID_SHIFT_1T);
- lpcr = kvm->arch.lpcr & ~LPCR_VRMASD;
- lpcr |= senc << (LPCR_VRMASD_SH - 4);
- kvm->arch.lpcr = lpcr;
+ lpcr_mask = LPCR_VRMASD;
+ /* the -4 is to account for senc values starting at 0x10 */
+ lpcr = senc << (LPCR_VRMASD_SH - 4);
/* Create HPTEs in the hash page table for the VRMA */
kvmppc_map_vrma(vcpu, memslot, porder);
@@ -1854,23 +1903,21 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
kvm->arch.rma = ri;
/* Update LPCR and RMOR */
- lpcr = kvm->arch.lpcr;
if (cpu_has_feature(CPU_FTR_ARCH_201)) {
/* PPC970; insert RMLS value (split field) in HID4 */
- lpcr &= ~((1ul << HID4_RMLS0_SH) |
- (3ul << HID4_RMLS2_SH));
- lpcr |= ((rmls >> 2) << HID4_RMLS0_SH) |
+ lpcr_mask = (1ul << HID4_RMLS0_SH) |
+ (3ul << HID4_RMLS2_SH) | HID4_RMOR;
+ lpcr = ((rmls >> 2) << HID4_RMLS0_SH) |
((rmls & 3) << HID4_RMLS2_SH);
/* RMOR is also in HID4 */
lpcr |= ((ri->base_pfn >> (26 - PAGE_SHIFT)) & 0xffff)
<< HID4_RMOR_SH;
} else {
/* POWER7 */
- lpcr &= ~(LPCR_VPM0 | LPCR_VRMA_L);
- lpcr |= rmls << LPCR_RMLS_SH;
+ lpcr_mask = LPCR_VPM0 | LPCR_VRMA_L | LPCR_RMLS;
+ lpcr = rmls << LPCR_RMLS_SH;
kvm->arch.rmor = ri->base_pfn << PAGE_SHIFT;
}
- kvm->arch.lpcr = lpcr;
pr_info("KVM: Using RMO at %lx size %lx (LPCR = %lx)\n",
ri->base_pfn << PAGE_SHIFT, rma_size, lpcr);
@@ -1889,6 +1936,8 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
}
}
+ kvmppc_update_lpcr(kvm, lpcr, lpcr_mask);
+
/* Order updates to kvm->arch.lpcr etc. vs. rma_setup_done */
smp_wmb();
kvm->arch.rma_setup_done = 1;
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 0effcd1..295fd58a 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -509,7 +509,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
beq 20b
/* Set LPCR and RMOR. */
-10: ld r8,KVM_LPCR(r9)
+10: ld r8,VCORE_LPCR(r5)
mtspr SPRN_LPCR,r8
ld r8,KVM_RMOR(r9)
mtspr SPRN_RMOR,r8
@@ -571,7 +571,8 @@ toc_tlbie_lock:
bne 24b
isync
- ld r7,KVM_LPCR(r9) /* use kvm->arch.lpcr to store HID4 */
+ ld r5,HSTATE_KVM_VCORE(r13)
+ ld r7,VCORE_LPCR(r5) /* use vcore->lpcr to store HID4 */
li r0,0x18f
rotldi r0,r0,HID4_LPID5_SH /* all lpid bits in HID4 = 1 */
or r0,r7,r0
--
1.8.1.4
next prev parent reply other threads:[~2013-10-31 21:18 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-31 21:17 [PULL 00/51] ppc patch queue 2013-10-31 Alexander Graf
2013-10-31 21:17 ` [PULL 01/51] KVM: PPC: Book3S HV: Reserve POWER8 space in get/set_one_reg Alexander Graf
2013-10-31 21:17 ` [PULL 02/51] KVM: PPC: Book3S HV: Save/restore SIAR and SDAR along with other PMU registers Alexander Graf
2013-10-31 21:17 ` [PULL 03/51] KVM: PPC: Book3S HV: Implement timebase offset for guests Alexander Graf
2013-10-31 21:17 ` [PULL 04/51] KVM: PPC: Book3S: Add GET/SET_ONE_REG interface for VRSAVE Alexander Graf
2013-10-31 21:17 ` [PULL 05/51] KVM: PPC: Book3S HV: Implement H_CONFER Alexander Graf
2013-10-31 21:17 ` [PULL 06/51] KVM: PPC: Book3S HV: Restructure kvmppc_hv_entry to be a subroutine Alexander Graf
2013-10-31 21:17 ` [PULL 07/51] KVM: PPC: Book3S HV: Pull out interrupt-reading code into " Alexander Graf
2013-10-31 21:17 ` [PULL 08/51] KVM: PPC: Book3S HV: Avoid unbalanced increments of VPA yield count Alexander Graf
2013-10-31 21:17 ` [PULL 09/51] KVM: PPC: BookE: Add GET/SET_ONE_REG interface for VRSAVE Alexander Graf
2013-10-31 21:17 ` Alexander Graf [this message]
2013-10-31 21:17 ` [PULL 11/51] KVM: PPC: Book3S HV: Add support for guest Program Priority Register Alexander Graf
2013-10-31 21:17 ` [PULL 12/51] KVM: PPC: Book3S HV: Support POWER6 compatibility mode on POWER7 Alexander Graf
2013-10-31 21:17 ` [PULL 13/51] KVM: PPC: Book3S HV: Don't crash host on unknown guest interrupt Alexander Graf
2013-10-31 21:17 ` [PULL 14/51] KVM: PPC: Book3S PR: Fix compilation without CONFIG_ALTIVEC Alexander Graf
2013-10-31 21:18 ` [PULL 15/51] KVM: PPC: Book3S PR: Keep volatile reg values in vcpu rather than shadow_vcpu Alexander Graf
2013-10-31 21:18 ` [PULL 16/51] KVM: PPC: Book3S PR: Allow guest to use 64k pages Alexander Graf
2013-10-31 21:18 ` [PULL 17/51] KVM: PPC: Book3S PR: Use 64k host pages where possible Alexander Graf
2013-10-31 21:18 ` [PULL 18/51] KVM: PPC: Book3S PR: Handle PP0 page-protection bit in guest HPTEs Alexander Graf
2013-10-31 21:18 ` [PULL 19/51] KVM: PPC: Book3S PR: Correct errors in H_ENTER implementation Alexander Graf
2013-10-31 21:18 ` [PULL 20/51] KVM: PPC: Book3S PR: Make HPT accesses and updates SMP-safe Alexander Graf
2013-10-31 21:18 ` [PULL 21/51] KVM: PPC: Book3S PR: Allocate kvm_vcpu structs from kvm_vcpu_cache Alexander Graf
2013-10-31 21:18 ` [PULL 22/51] KVM: PPC: Book3S: Move skip-interrupt handlers to common code Alexander Graf
2013-10-31 21:18 ` [PULL 23/51] KVM: PPC: Book3S PR: Better handling of host-side read-only pages Alexander Graf
2013-10-31 21:18 ` [PULL 24/51] KVM: PPC: Book3S PR: Use mmu_notifier_retry() in kvmppc_mmu_map_page() Alexander Graf
2013-10-31 21:18 ` [PULL 25/51] KVM: PPC: Book3S PR: Mark pages accessed, and dirty if being written Alexander Graf
2013-10-31 21:18 ` [PULL 26/51] KVM: PPC: Book3S PR: Reduce number of shadow PTEs invalidated by MMU notifiers Alexander Graf
2013-10-31 21:18 ` [PULL 27/51] kvm: powerpc: book3s hv: Fix vcore leak Alexander Graf
2013-10-31 21:18 ` [PULL 28/51] KVM: PPC: Book3S HV: Better handling of exceptions that happen in real mode Alexander Graf
2013-10-31 21:18 ` [PULL 29/51] powerpc: book3e: _PAGE_LENDIAN must be _PAGE_ENDIAN Alexander Graf
2013-10-31 21:18 ` [PULL 30/51] kvm: powerpc: allow guest control "E" attribute in mas2 Alexander Graf
2013-10-31 21:18 ` [PULL 31/51] kvm: powerpc: allow guest control "G" " Alexander Graf
2013-10-31 21:18 ` [PULL 32/51] kvm: powerpc: e500: mark page accessed when mapping a guest page Alexander Graf
2013-10-31 21:18 ` [PULL 33/51] powerpc: remove unnecessary line continuations Alexander Graf
2013-10-31 21:18 ` [PULL 34/51] powerpc: move debug registers in a structure Alexander Graf
2013-11-03 14:30 ` Gleb Natapov
2013-11-03 20:56 ` Benjamin Herrenschmidt
2013-11-04 0:03 ` Scott Wood
2013-11-04 6:43 ` Alexander Graf
2013-11-04 6:51 ` Benjamin Herrenschmidt
2013-10-31 21:18 ` [PULL 35/51] powerpc: export debug registers save function for KVM Alexander Graf
2013-10-31 21:18 ` [PULL 36/51] KVM: PPC: E500: exit to user space on "ehpriv 1" instruction Alexander Graf
2013-10-31 21:18 ` [PULL 37/51] KVM: PPC: E500: Using "struct debug_reg" Alexander Graf
2013-10-31 21:18 ` [PULL 38/51] KVM: PPC: E500: Add userspace debug stub support Alexander Graf
2013-10-31 21:18 ` [PULL 39/51] kvm: powerpc: book3s: remove kvmppc_handler_highmem label Alexander Graf
2013-10-31 21:18 ` [PULL 40/51] kvm: powerpc: book3s: move book3s_64_vio_hv.c into the main kernel binary Alexander Graf
2013-10-31 21:18 ` [PULL 41/51] kvm: powerpc: book3s: pr: Rename KVM_BOOK3S_PR to KVM_BOOK3S_PR_POSSIBLE Alexander Graf
2013-10-31 21:18 ` [PULL 42/51] kvm: powerpc: book3s: Add a new config variable CONFIG_KVM_BOOK3S_HV_POSSIBLE Alexander Graf
2013-10-31 21:18 ` [PULL 43/51] kvm: powerpc: Add kvmppc_ops callback Alexander Graf
2013-10-31 21:18 ` [PULL 44/51] kvm: powerpc: book3s: Cleanup interrupt handling code Alexander Graf
2013-10-31 21:18 ` [PULL 45/51] kvm: powerpc: book3s: Add is_hv_enabled to kvmppc_ops Alexander Graf
2013-10-31 21:18 ` [PULL 46/51] kvm: powerpc: book3s: pr: move PR related tracepoints to a separate header Alexander Graf
2013-10-31 21:18 ` [PULL 47/51] kvm: powerpc: booke: Move booke related tracepoints to " Alexander Graf
2013-10-31 21:18 ` [PULL 48/51] kvm: powerpc: book3s: Support building HV and PR KVM as module Alexander Graf
2013-10-31 21:18 ` [PULL 49/51] kvm: Add struct kvm arg to memslot APIs Alexander Graf
2013-10-31 21:18 ` [PULL 50/51] kvm: powerpc: book3s: Allow the HV and PR selection per virtual machine Alexander Graf
2013-10-31 21:18 ` [PULL 51/51] kvm: powerpc: book3s: drop is_hv_enabled Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383254316-11243-11-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=gleb@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=paulus@samba.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox