From: Alex Williamson <alex.williamson@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, alex.williamson@redhat.com
Subject: [PATCH 5/5] vfio-pci: Add device request interface
Date: Wed, 04 Feb 2015 09:13:16 -0700 [thread overview]
Message-ID: <20150204161316.29468.50513.stgit@gimli.home> (raw)
In-Reply-To: <20150204155247.29468.20260.stgit@gimli.home>
Userspace can opt to receive a device request notification,
indicating that the device should be released. This is setup
the same way as the error IRQ and also supports eventfd signaling.
Future support may forcefully remove the device from the user if
the request is ignored.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
drivers/vfio/pci/vfio_pci.c | 21 ++++++++++++++++++++-
drivers/vfio/pci/vfio_pci_intrs.c | 16 ++++++++++++++++
drivers/vfio/pci/vfio_pci_private.h | 1 +
include/uapi/linux/vfio.h | 1 +
4 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 7cc0122..f8a1863 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -239,9 +239,12 @@ static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
return (flags & PCI_MSIX_FLAGS_QSIZE) + 1;
}
- } else if (irq_type == VFIO_PCI_ERR_IRQ_INDEX)
+ } else if (irq_type == VFIO_PCI_ERR_IRQ_INDEX) {
if (pci_is_pcie(vdev->pdev))
return 1;
+ } else if (irq_type == VFIO_PCI_REQ_IRQ_INDEX) {
+ return 1;
+ }
return 0;
}
@@ -464,6 +467,7 @@ static long vfio_pci_ioctl(void *device_data,
switch (info.index) {
case VFIO_PCI_INTX_IRQ_INDEX ... VFIO_PCI_MSIX_IRQ_INDEX:
+ case VFIO_PCI_REQ_IRQ_INDEX:
break;
case VFIO_PCI_ERR_IRQ_INDEX:
if (pci_is_pcie(vdev->pdev))
@@ -828,6 +832,20 @@ static int vfio_pci_mmap(void *device_data, struct vm_area_struct *vma)
req_len, vma->vm_page_prot);
}
+static void vfio_pci_request(void *device_data, unsigned int count)
+{
+ struct vfio_pci_device *vdev = device_data;
+
+ mutex_lock(&vdev->igate);
+
+ if (vdev->req_trigger) {
+ dev_dbg(&vdev->pdev->dev, "Requesting device from user\n");
+ eventfd_signal(vdev->req_trigger, 1);
+ }
+
+ mutex_unlock(&vdev->igate);
+}
+
static const struct vfio_device_ops vfio_pci_ops = {
.name = "vfio-pci",
.open = vfio_pci_open,
@@ -836,6 +854,7 @@ static const struct vfio_device_ops vfio_pci_ops = {
.read = vfio_pci_read,
.write = vfio_pci_write,
.mmap = vfio_pci_mmap,
+ .request = vfio_pci_request,
};
static int vfio_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index b134bef..1af0ec7 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -817,6 +817,16 @@ static int vfio_pci_set_err_trigger(struct vfio_pci_device *vdev,
return vfio_pci_set_ctx_trigger_single(&vdev->err_trigger, flags, data);
}
+static int vfio_pci_set_req_trigger(struct vfio_pci_device *vdev,
+ unsigned index, unsigned start,
+ unsigned count, uint32_t flags, void *data)
+{
+ if (index != VFIO_PCI_REQ_IRQ_INDEX || start != 0 || count != 1)
+ return -EINVAL;
+
+ return vfio_pci_set_ctx_trigger_single(&vdev->req_trigger, flags, data);
+}
+
int vfio_pci_set_irqs_ioctl(struct vfio_pci_device *vdev, uint32_t flags,
unsigned index, unsigned start, unsigned count,
void *data)
@@ -858,6 +868,12 @@ int vfio_pci_set_irqs_ioctl(struct vfio_pci_device *vdev, uint32_t flags,
func = vfio_pci_set_err_trigger;
break;
}
+ case VFIO_PCI_REQ_IRQ_INDEX:
+ switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) {
+ case VFIO_IRQ_SET_ACTION_TRIGGER:
+ func = vfio_pci_set_req_trigger;
+ break;
+ }
}
if (!func)
diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
index 671c17a..c9f9b32 100644
--- a/drivers/vfio/pci/vfio_pci_private.h
+++ b/drivers/vfio/pci/vfio_pci_private.h
@@ -58,6 +58,7 @@ struct vfio_pci_device {
struct pci_saved_state *pci_saved_state;
int refcnt;
struct eventfd_ctx *err_trigger;
+ struct eventfd_ctx *req_trigger;
};
#define is_intx(vdev) (vdev->irq_type == VFIO_PCI_INTX_IRQ_INDEX)
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 29715d2..82889c3 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -333,6 +333,7 @@ enum {
VFIO_PCI_MSI_IRQ_INDEX,
VFIO_PCI_MSIX_IRQ_INDEX,
VFIO_PCI_ERR_IRQ_INDEX,
+ VFIO_PCI_REQ_IRQ_INDEX,
VFIO_PCI_NUM_IRQS
};
prev parent reply other threads:[~2015-02-04 16:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-04 16:12 [PATCH 0/5] vfio/pci: Device request support Alex Williamson
2015-02-04 16:12 ` [PATCH 1/5] vfio: Add device tracking during unbind Alex Williamson
2015-02-04 16:12 ` [PATCH 2/5] vfio: Tie IOMMU group reference to vfio group Alex Williamson
2015-02-04 16:13 ` [PATCH 3/5] vfio: Add and use device request op for vfio bus drivers Alex Williamson
2015-02-04 16:13 ` [PATCH 4/5] vfio-pci: Generalize setup of simple eventfds Alex Williamson
2015-02-04 16:13 ` Alex Williamson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150204161316.29468.50513.stgit@gimli.home \
--to=alex.williamson@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox