Kernel KVM virtualization development
 help / color / mirror / Atom feed
From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH
Date: Tue, 16 Jun 2026 00:41:42 +0000	[thread overview]
Message-ID: <20260616004155.1435766-14-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>

Flush both L1 and L2 ASIDs in svm_flush_tlb_all() to appropriately
handle KVM_REQ_TLB_FLUSH by flushing all TLB entries in all contexts
(e.g. for kvm_flush_remote_tlbs()). Since both L1 and L2 currently share
an ASID, this is effectively a noop, but it won't be once L2 has a
separate ASID.

Purge all Hyper-V TLB FIFOs (for both L1 and L2), since both ASIDs are
flushed, and an ASID flush is a superset of Hyper-V's fine-grained
flushing (see comment in svm_flush_tlb_asid()).

Note that if one TLB flush FIFO is purged (e.g. as a result of
KVM_REQ_TLB_FLUSH_CURRENT), it will consume KVM_REQ_HV_TLB_FLUSH, and a
subsequent KVM_REQ_TLB_FLUSH will not flush the other FIFO. This is
alright as flushing both FIFOs is a (newly introduced) optimization
anyway. The other FIFO will be checked after a nested transition, as
KVM_REQ_HV_TLB_FLUSH is always set on nested transitions.

Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
 arch/x86/kvm/hyperv.h     | 6 ++++++
 arch/x86/kvm/svm/nested.c | 1 -
 arch/x86/kvm/svm/svm.c    | 8 +++++++-
 3 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index 0f64038408072..6f212d5fc8d50 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -231,6 +231,11 @@ static inline void kvm_hv_purge_tlb_flush_fifo(struct kvm_vcpu *vcpu)
 	__kvm_hv_purge_tlb_flush_fifo(vcpu, fifo);
 }
 
+static inline void kvm_hv_purge_all_tlb_flush_fifos(struct kvm_vcpu *vcpu)
+{
+	__kvm_hv_purge_tlb_flush_fifo(vcpu, NULL);
+}
+
 static inline bool guest_hv_cpuid_has_l2_tlb_flush(struct kvm_vcpu *vcpu)
 {
 	struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
@@ -302,6 +307,7 @@ static inline int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
 	return HV_STATUS_ACCESS_DENIED;
 }
 static inline void kvm_hv_purge_tlb_flush_fifo(struct kvm_vcpu *vcpu) {}
+static inline void kvm_hv_purge_all_tlb_flush_fifos(struct kvm_vcpu *vcpu) {}
 static inline bool kvm_hv_synic_has_vector(struct kvm_vcpu *vcpu, int vector)
 {
 	return false;
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index bc8c466a1f821..eb56c2fbf2832 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -694,7 +694,6 @@ static void nested_svm_transition_tlb_flush(struct kvm_vcpu *vcpu)
 	 * TODO: optimize unconditional TLB flush/MMU sync.  A partial list of
 	 * things to fix before this can be conditional:
 	 *
-	 *  - Flush TLBs for both L1 and L2 remote TLB flush
 	 *  - Honor L1's request to flush an ASID on nested VMRUN
 	 *  - Sync nested NPT MMU on VMRUN that flushes L2's ASID[*]
 	 *  - Don't crush a pending TLB flush in vmcb02 on nested VMRUN
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index dac3d0098bb77..4f13c3456a5d7 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4203,6 +4203,8 @@ static void svm_flush_tlb_current(struct kvm_vcpu *vcpu)
 
 static void svm_flush_tlb_all(struct kvm_vcpu *vcpu)
 {
+	struct vcpu_svm *svm = to_svm(vcpu);
+
 	/*
 	 * When running on Hyper-V with EnlightenedNptTlb enabled, remote TLB
 	 * flushes should be routed to hv_flush_remote_tlbs() without requesting
@@ -4213,7 +4215,11 @@ static void svm_flush_tlb_all(struct kvm_vcpu *vcpu)
 	if (WARN_ON_ONCE(svm_hv_is_enlightened_tlb_enabled(vcpu)))
 		hv_flush_remote_tlbs(vcpu->kvm);
 
-	svm_flush_tlb_asid(vcpu);
+	kvm_hv_purge_all_tlb_flush_fifos(vcpu);
+
+	vmcb_set_flush_asid(svm->vmcb01.ptr);
+	if (svm->nested.vmcb02.ptr)
+		vmcb_set_flush_asid(svm->nested.vmcb02.ptr);
 }
 
 static void svm_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t gva)
-- 
2.54.0.1136.gdb2ca164c4-goog


  parent reply	other threads:[~2026-06-16  0:42 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16  0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16  1:06   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16  1:08   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-06-16  0:41 ` Yosry Ahmed [this message]
2026-06-16  1:05   ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16  1:20   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16  1:30   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
2026-06-16  1:21   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260616004155.1435766-14-yosry@kernel.org \
    --to=yosry@kernel.org \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox