Kernel KVM virtualization development
 help / color / mirror / Atom feed
From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns
Date: Tue, 16 Jun 2026 00:41:45 +0000	[thread overview]
Message-ID: <20260616004155.1435766-17-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>

The handling for the entry and exit TLB flushes will diverge
significantly in the following changes. Instead of adding an 'is_vmenter'
argument like nested_vmx_transition_tlb_flush(), just split the function
into two variants for 'entry' and 'exit'.

No functional change intended.

Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
 arch/x86/kvm/svm/nested.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 9a917d057aa8e..234724d8b4c54 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -685,7 +685,7 @@ static void nested_save_pending_event_to_vmcb12(struct vcpu_svm *svm,
 	vmcb12->control.exit_int_info = exit_int_info;
 }
 
-static void nested_svm_transition_tlb_flush(struct kvm_vcpu *vcpu)
+static void nested_svm_entry_tlb_flush(struct kvm_vcpu *vcpu)
 {
 	/* Handle pending Hyper-V TLB flush requests */
 	kvm_hv_nested_transtion_tlb_flush(vcpu, npt_enabled);
@@ -705,6 +705,14 @@ static void nested_svm_transition_tlb_flush(struct kvm_vcpu *vcpu)
 	kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
 }
 
+static void nested_svm_exit_tlb_flush(struct kvm_vcpu *vcpu)
+{
+	kvm_hv_nested_transtion_tlb_flush(vcpu, npt_enabled);
+
+	kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
+	kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
+}
+
 static void svm_switch_vmcb(struct vcpu_svm *svm, struct kvm_vmcb_info *target_vmcb)
 {
 	struct kvm_vcpu *vcpu = &svm->vcpu;
@@ -712,7 +720,10 @@ static void svm_switch_vmcb(struct vcpu_svm *svm, struct kvm_vmcb_info *target_v
 	svm->current_vmcb = target_vmcb;
 	svm->vmcb = target_vmcb->ptr;
 
-	nested_svm_transition_tlb_flush(vcpu);
+	if (target_vmcb == &svm->nested.vmcb02)
+		nested_svm_entry_tlb_flush(vcpu);
+	else
+		nested_svm_exit_tlb_flush(vcpu);
 }
 
 /*
-- 
2.54.0.1136.gdb2ca164c4-goog


  parent reply	other threads:[~2026-06-16  0:42 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-16  0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16  1:06   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16  1:08   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-06-16  1:05   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16  0:41 ` Yosry Ahmed [this message]
2026-06-16  0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16  1:20   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16  0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16  1:30   ` sashiko-bot
2026-06-16  0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
2026-06-16  1:21   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260616004155.1435766-17-yosry@kernel.org \
    --to=yosry@kernel.org \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vkuznets@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox