[PATCH v7 00/36] Cleaning up the KVM clock mess

[PATCH v7 00/36] Cleaning up the KVM clock mess

[David Woodhouse]

This is v7 of the series to clean up the KVM clock, rebased onto
kvm-x86/next (patch 1 of v6 is already merged there as commit
710b3a30f407).

The KVM clock has historically suffered from three problems:

 1. Imprecision: get_kvmclock_ns() computed the clock from the *host*
    TSC without applying guest TSC scaling, causing systemic drift from
    the values the guest computes from its own TSC.

 2. Unnecessary discontinuities: gratuitous KVM_REQ_MASTERCLOCK_UPDATE
    requests caused the master clock reference point to be re-snapshotted,
    yanking the guest's clock due to arithmetic precision differences.

 3. No precise migration API: the existing KVM_[GS]ET_CLOCK only allows
    setting the clock at a given UTC reference time, which is necessarily
    imprecise. There was no way to preserve the exact arithmetic
    relationship between guest TSC and KVM clock across live migration.

This series addresses all three, and adds new APIs for precise clock
migration and TSC frequency reporting. As an added bonus, it now rips
out the whole pvclock_gtod_data hack which was shadowing the kernel's
timekeeping, and uses ktime snapshots as $DEITY (well, Thomas) intended.

The series is now ordered with the fixes and cleanups first; the new
uAPI (the pvclock-abi UAPI move, KVM_[GS]ET_CLOCK_GUEST and
KVM_VCPU_TSC_SCALE) and all the new selftests come at the end, so that
the former are not gated on review of the latter.

v7: https://git.infradead.org/?p=users/dwmw2/linux.git;a=shortlog;h=refs/heads/kvmclock7

 - Rebased onto kvm-x86/next; dropped the already-merged first patch.
 - Reordered so that all the new uAPI (pvclock-abi UAPI move,
   KVM_[GS]ET_CLOCK_GUEST, KVM_VCPU_TSC_SCALE) and the new selftests
   come at the end of the series, after the fixes and cleanups which
   do not depend on them (Sean).
 - Split "Restructure get_kvmclock()" into two: dropping the CPU
   pinning is now a separate preliminary patch (Sean).
 - compute_guest_tsc(): use abs() and a conditional negation instead
   of duplicated scaling logic, and note in the changelog that the
   negative delta case is believed unreachable in practice (Sean).
 - Use HZ_PER_KHZ instead of literal 1000 for TSC unit conversions
   (Sean).
 - xen_migration_test: transfer the guest TSC via KVM_VCPU_TSC_OFFSET
   instead of a no-op TSC_ADJUST save/restore, making the runstate
   restore and steal-time assertions deterministic instead of racing
   VM-creation latency.
 - Reference the kvmclock definitions taxonomy by its now-stable
   (hopefully) commit ID 710b3a30f407.

v6: https://lore.kernel.org/all/20260703212145.343527-1-dwmw2@infradead.org/
    https://git.infradead.org/?p=users/dwmw2/linux.git;a=shortlog;h=refs/heads/kvmclock6

David Woodhouse (33):
      KVM: x86: Improve accuracy of KVM clock when TSC scaling is in force
      KVM: x86: Explicitly disable TSC scaling without CONSTANT_TSC
      KVM: x86: Activate master clock immediately on vCPU creation
      KVM: x86: Avoid NTP frequency skew for KVM clock on 32-bit host
      KVM: x86: Fold __get_kvmclock() into get_kvmclock()
      KVM: x86: Drop CPU pinning in get_kvmclock()
      KVM: x86: Restructure get_kvmclock()
      KVM: x86: Fix KVM clock precision in get_kvmclock() with TSC scaling
      KVM: x86: Use get_kvmclock() in kvm_get_wall_clock_epoch()
      KVM: x86: Fix compute_guest_tsc() to handle negative time deltas
      KVM: x86: Restructure kvm_guest_time_update() for TSC upscaling
      KVM: x86: Simplify and comment kvm_get_time_scale()
      KVM: x86: Remove implicit rdtsc() from kvm_compute_l1_tsc_offset()
      KVM: x86: Improve synchronization in kvm_synchronize_tsc()
      KVM: x86: Kill last_tsc_{nsec,write,offset} fields
      KVM: x86: Replace nr_vcpus_matched_tsc count with all_vcpus_matched_tsc bool
      KVM: x86: Allow KVM master clock mode when TSCs are offset from each other
      KVM: x86: Factor out kvm_use_master_clock()
      KVM: x86: Avoid gratuitous global clock updates
      KVM: x86/xen: Prevent runstate times from becoming negative
      KVM: x86: Avoid redundant masterclock updates from multiple vCPUs
      KVM: x86: Remove runtime Xen TSC frequency CPUID update
      KVM: x86: Re-synchronize TSC after KVM_SET_TSC_KHZ
      KVM: x86: Use ktime_get_snapshot_id() for master clock
      KVM: x86: Compute kvmclock base without pvclock_gtod_data
      KVM: x86: Cache host vclock_mode for masterclock eligibility checks
      KVM: x86: Remove pvclock_gtod_data and private timekeeping code
      KVM: x86: Activate master clock from kvm_arch_init_vm()
      KVM: selftests: Use UAPI pvclock-abi.h in xen_shinfo_test
      KVM: x86: Add KVM_VCPU_TSC_SCALE and fix the documentation on TSC migration
      KVM: selftests: Add master clock offset test
      KVM: selftests: Add Xen/generic CPUID timing leaf test
      KVM: selftests: Add Xen runstate migration test

Jack Allister (3):
      UAPI: x86: Move pvclock-abi to UAPI for x86 platforms
      KVM: x86: Add KVM_[GS]ET_CLOCK_GUEST for accurate KVM clock migration
      KVM: selftests: Add KVM/PV clock selftest to prove timer correction

 Documentation/virt/kvm/api.rst                     |   37 +
 Documentation/virt/kvm/devices/vcpu.rst            |  120 ++-
 MAINTAINERS                                        |    4 +-
 arch/x86/include/asm/kvm_host.h                    |   16 +-
 arch/x86/include/uapi/asm/kvm.h                    |    7 +
 arch/x86/include/{ => uapi}/asm/pvclock-abi.h      |   27 +-
 arch/x86/kvm/cpuid.c                               |   16 -
 arch/x86/kvm/msrs.c                                |    9 +-
 arch/x86/kvm/svm/svm.c                             |    3 +-
 arch/x86/kvm/vmx/vmx.c                             |   10 +
 arch/x86/kvm/x86.c                                 | 1089 ++++++++++++--------
 arch/x86/kvm/x86.h                                 |    3 +-
 arch/x86/kvm/xen.c                                 |   28 +-
 arch/x86/kvm/xen.h                                 |   13 -
 include/uapi/linux/kvm.h                           |    3 +
 scripts/xen-hypercalls.sh                          |    2 +-
 tools/testing/selftests/kvm/Makefile.kvm           |    5 +
 .../selftests/kvm/x86/masterclock_offset_test.c    |  180 ++++
 .../selftests/kvm/x86/pvclock_migration_test.c     |  383 +++++++
 tools/testing/selftests/kvm/x86/pvclock_test.c     |  443 ++++++++
 .../selftests/kvm/x86/xen_cpuid_timing_test.c      |  230 +++++
 .../testing/selftests/kvm/x86/xen_migration_test.c |  205 ++++
 tools/testing/selftests/kvm/x86/xen_shinfo_test.c  |   17 +-
 23 files changed, 2325 insertions(+), 525 deletions(-)

[PATCH v7 01/36] KVM: x86: Improve accuracy of KVM clock when TSC scaling is in force

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

The kvm_guest_time_update() function scales the host TSC frequency to
the guest's using kvm_scale_tsc() and the v->arch.l1_tsc_scaling_ratio
scaling ratio previously calculated for that vCPU. Then calculates the
scaling factors for the KVM clock itself based on that guest TSC
frequency.

However, it uses kHz as the unit when scaling, and then multiplies by
1000 only at the end.

With a host TSC frequency of 3000MHz and a guest set to 2500MHz, the
result of kvm_scale_tsc() will actually come out at 2,499,999kHz. So
the KVM clock advertised to the guest is based on a frequency of
2,499,999,000 Hz.

By using Hz as the unit from the beginning, the KVM clock would be based
on a more accurate frequency of 2,499,999,999 Hz in this example.

Use u64 for the hw_tsc_hz field since an unsigned int would overflow for
TSC frequencies above 4GHz. Use div_u64() for the Xen CPUID leaf to
play nice with 32-bit kernels.

Fixes: 78db6a503796 ("KVM: x86: rewrite handling of scaled TSC for kvmclock")
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
---
 arch/x86/include/asm/kvm_host.h |  2 +-
 arch/x86/kvm/cpuid.c            |  3 ++-
 arch/x86/kvm/x86.c              | 18 ++++++++++--------
 3 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 7a258831616f..bffce2167141 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -864,7 +864,7 @@ struct kvm_vcpu_arch {
 	gpa_t time;
 	s8  pvclock_tsc_shift;
 	u32 pvclock_tsc_mul;
-	unsigned int hw_tsc_khz;
+	u64 hw_tsc_hz;
 	struct gfn_to_pfn_cache pv_time;
 	/* set guest stopped flag in pvclock flags field */
 	bool pvclock_set_guest_stopped_request;
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 9e9cf6538a96..7049f5a5597b 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -16,6 +16,7 @@
 #include <linux/vmalloc.h>
 #include <linux/uaccess.h>
 #include <linux/sched/stat.h>
+#include <linux/units.h>
 
 #include <asm/processor.h>
 #include <asm/user.h>
@@ -2146,7 +2147,7 @@ bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx,
 				*ecx = vcpu->arch.pvclock_tsc_mul;
 				*edx = vcpu->arch.pvclock_tsc_shift;
 			} else if (index == 2) {
-				*eax = vcpu->arch.hw_tsc_khz;
+				*eax = div_u64(vcpu->arch.hw_tsc_hz, HZ_PER_KHZ);
 			}
 		}
 	} else {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0f1a829032c0..f7e1031f8eb0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -61,6 +61,7 @@
 #include <linux/mem_encrypt.h>
 #include <linux/suspend.h>
 #include <linux/smp.h>
+#include <linux/units.h>
 
 #include <trace/events/ipi.h>
 #include <trace/events/kvm.h>
@@ -1763,7 +1764,8 @@ static void kvm_setup_guest_pvclock(struct pvclock_vcpu_time_info *ref_hv_clock,
 int kvm_guest_time_update(struct kvm_vcpu *v)
 {
 	struct pvclock_vcpu_time_info hv_clock = {};
-	unsigned long flags, tgt_tsc_khz;
+	unsigned long flags;
+	u64 tgt_tsc_hz;
 	unsigned seq;
 	struct kvm_vcpu_arch *vcpu = &v->arch;
 	struct kvm_arch *ka = &v->kvm->arch;
@@ -1789,8 +1791,8 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
-	tgt_tsc_khz = get_cpu_tsc_khz();
-	if (unlikely(tgt_tsc_khz == 0)) {
+	tgt_tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
+	if (unlikely(tgt_tsc_hz == 0)) {
 		local_irq_restore(flags);
 		kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
 		return 1;
@@ -1825,16 +1827,16 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
 	/* With all the info we got, fill in the values */
 
 	if (kvm_caps.has_tsc_control) {
-		tgt_tsc_khz = kvm_scale_tsc(tgt_tsc_khz,
+		tgt_tsc_hz = kvm_scale_tsc(tgt_tsc_hz,
 					    v->arch.l1_tsc_scaling_ratio);
-		tgt_tsc_khz = tgt_tsc_khz ? : 1;
+		tgt_tsc_hz = tgt_tsc_hz ? : 1;
 	}
 
-	if (unlikely(vcpu->hw_tsc_khz != tgt_tsc_khz)) {
-		kvm_get_time_scale(NSEC_PER_SEC, tgt_tsc_khz * 1000LL,
+	if (unlikely(vcpu->hw_tsc_hz != tgt_tsc_hz)) {
+		kvm_get_time_scale(NSEC_PER_SEC, tgt_tsc_hz,
 				   &vcpu->pvclock_tsc_shift,
 				   &vcpu->pvclock_tsc_mul);
-		vcpu->hw_tsc_khz = tgt_tsc_khz;
+		vcpu->hw_tsc_hz = tgt_tsc_hz;
 	}
 
 	hv_clock.tsc_shift = vcpu->pvclock_tsc_shift;

base-commit: 271255273d5ff348fe29d89fe4712b2f7f7907c3
-- 
2.55.0

[PATCH v7 02/36] KVM: x86: Explicitly disable TSC scaling without CONSTANT_TSC

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

KVM does make an attempt to cope with non-constant TSC, and has
notifiers to handle host TSC frequency changes. However, it *only*
adjusts the KVM clock, and doesn't adjust TSC frequency scaling when
the host changes.

This is presumably because non-constant TSCs were fixed in hardware
long before TSC scaling was implemented, so there should never be real
CPUs which have TSC scaling but *not* CONSTANT_TSC.

Such a combination could potentially happen in some odd L1 nesting
environment, but it isn't worth trying to support it. Just make the
dependency explicit.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/svm/svm.c |  3 ++-
 arch/x86/kvm/vmx/vmx.c | 10 ++++++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index d68cba12c772..d7fb98a2aaa2 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -5624,7 +5624,8 @@ static __init int svm_hardware_setup(void)
 				     XFEATURE_MASK_BNDCSR);
 
 	if (tsc_scaling) {
-		if (!boot_cpu_has(X86_FEATURE_TSCRATEMSR)) {
+		if (!boot_cpu_has(X86_FEATURE_TSCRATEMSR) ||
+		    !boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
 			tsc_scaling = false;
 		} else {
 			pr_info("TSC scaling supported\n");
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index e4b9ac7fed9f..d553537004cf 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2838,6 +2838,16 @@ static int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	if (!cpu_has_sgx())
 		_cpu_based_2nd_exec_control &= ~SECONDARY_EXEC_ENCLS_EXITING;
 
+	/*
+	 * KVM doesn't re-derive the TSC scaling ratio when the host TSC
+	 * frequency changes, so TSC scaling is only usable with a constant
+	 * TSC.  Clear the control here rather than in vmx_hardware_setup() so
+	 * that the per-CPU configs recomputed by vmx_check_processor_compat()
+	 * stay consistent with the golden vmcs_config.
+	 */
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		_cpu_based_2nd_exec_control &= ~SECONDARY_EXEC_TSC_SCALING;
+
 	if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_TERTIARY_CONTROLS)
 		_cpu_based_3rd_exec_control =
 			adjust_vmx_controls64(KVM_OPTIONAL_VMX_TERTIARY_VM_EXEC_CONTROL,
-- 
2.55.0

[PATCH v7 03/36] KVM: x86: Activate master clock immediately on vCPU creation

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Previously, the master clock was only activated when the first vCPU
processed KVM_REQ_MASTERCLOCK_UPDATE during KVM_RUN. This meant that
KVM_GET_CLOCK could not return the host_tsc field until after the
first KVM_RUN, making it impossible for userspace to follow the
documented TSC migration procedure without a dummy vCPU run.

Fix this by calling kvm_update_masterclock() directly from
kvm_arch_vcpu_postcreate(), after kvm_synchronize_tsc() has already
set all_vcpus_matched_freq. This ensures the master clock is active
immediately, and KVM_GET_CLOCK returns a valid {host_tsc, realtime}
pair as soon as a vCPU exists.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f7e1031f8eb0..dac9264497e8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9434,6 +9434,8 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 		return;
 	vcpu_load(vcpu);
 	kvm_synchronize_tsc(vcpu, NULL);
+	if (!vcpu->kvm->arch.use_master_clock)
+		kvm_update_masterclock(vcpu->kvm);
 	vcpu_put(vcpu);
 
 	/* poll control enabled by default */
-- 
2.55.0

[PATCH v7 04/36] KVM: x86: Avoid NTP frequency skew for KVM clock on 32-bit host

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Commit 53fafdbb8b21 ("KVM: x86: switch KVMCLOCK base to monotonic raw
clock") did so only for 64-bit hosts, by capturing the boot offset from
within the existing clocksource notifier update_pvclock_gtod().

That notifier was added in commit 16e8d74d2da9 ("KVM: x86: notifier for
clocksource changes") but only on x86_64, because its original purpose
was just to disable the "master clock" mode which is only supported on
x86_64.

Now that the notifier is used for more than disabling master clock mode,
enable it for the 32-bit build too so that get_kvmclock_base_ns() can be
unaffected by NTP sync on 32-bit too.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/x86.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index dac9264497e8..71e0653aa447 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -874,7 +874,6 @@ static inline bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu)
 	       kvm_request_pending(vcpu) || xfer_to_guest_mode_work_pending();
 }
 
-#ifdef CONFIG_X86_64
 struct pvclock_clock {
 	int vclock_mode;
 	u64 cycle_last;
@@ -932,13 +931,6 @@ static s64 get_kvmclock_base_ns(void)
 	/* Count up from boot time, but with the frequency of the raw clock.  */
 	return ktime_to_ns(ktime_add(ktime_get_raw(), pvclock_gtod_data.offs_boot));
 }
-#else
-static s64 get_kvmclock_base_ns(void)
-{
-	/* Master clock not used, so we can just use CLOCK_BOOTTIME.  */
-	return ktime_get_boottime_ns();
-}
-#endif
 
 static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
 {
@@ -6868,6 +6860,7 @@ static void pvclock_irq_work_fn(struct irq_work *w)
 }
 
 static DEFINE_IRQ_WORK(pvclock_irq_work, pvclock_irq_work_fn);
+#endif
 
 /*
  * Notification about pvclock gtod data update.
@@ -6875,26 +6868,26 @@ static DEFINE_IRQ_WORK(pvclock_irq_work, pvclock_irq_work_fn);
 static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,
 			       void *priv)
 {
-	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
 	struct timekeeper *tk = priv;
 
 	update_pvclock_gtod(tk);
 
+#ifdef CONFIG_X86_64
 	/*
 	 * Disable master clock if host does not trust, or does not use,
 	 * TSC based clocksource. Delegate queue_work() to irq_work as
 	 * this is invoked with tk_core.seq write held.
 	 */
-	if (!gtod_is_based_on_tsc(gtod->clock.vclock_mode) &&
+	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode) &&
 	    atomic_read(&kvm_guest_has_master_clock) != 0)
 		irq_work_queue(&pvclock_irq_work);
+#endif
 	return 0;
 }
 
 static struct notifier_block pvclock_gtod_notifier = {
 	.notifier_call = pvclock_gtod_notify,
 };
-#endif
 
 void kvm_setup_xss_caps(void)
 {
@@ -7113,9 +7106,9 @@ int kvm_x86_vendor_init(struct kvm_x86_init_ops *ops)
 
 	if (pi_inject_timer == -1)
 		pi_inject_timer = housekeeping_enabled(HK_TYPE_TIMER);
-#ifdef CONFIG_X86_64
 	pvclock_gtod_register_notifier(&pvclock_gtod_notifier);
 
+#ifdef CONFIG_X86_64
 	if (hypervisor_is_type(X86_HYPER_MS_HYPERV))
 		set_hv_tscchange_cb(kvm_hyperv_tsc_notifier);
 #endif
@@ -7172,8 +7165,8 @@ void kvm_x86_vendor_exit(void)
 					    CPUFREQ_TRANSITION_NOTIFIER);
 		cpuhp_remove_state_nocalls(CPUHP_AP_X86_KVM_CLK_ONLINE);
 	}
-#ifdef CONFIG_X86_64
 	pvclock_gtod_unregister_notifier(&pvclock_gtod_notifier);
+#ifdef CONFIG_X86_64
 	irq_work_sync(&pvclock_irq_work);
 	cancel_work_sync(&pvclock_gtod_work);
 #endif
-- 
2.55.0

[PATCH v7 05/36] KVM: x86: Fold __get_kvmclock() into get_kvmclock()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

There is no need for the separate __get_kvmclock() helper; just inline
its body into get_kvmclock() within the seqcount retry loop.

No functional change.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 63 +++++++++++++++++++++-------------------------
 1 file changed, 28 insertions(+), 35 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 71e0653aa447..1a598e99852c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1650,50 +1650,43 @@ static unsigned long get_cpu_tsc_khz(void)
 		return __this_cpu_read(cpu_tsc_khz);
 }
 
-/* Called within read_seqcount_begin/retry for kvm->pvclock_sc.  */
-static void __get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
+static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
 {
 	struct kvm_arch *ka = &kvm->arch;
 	struct pvclock_vcpu_time_info hv_clock;
+	unsigned int seq;
 
-	/* both __this_cpu_read() and rdtsc() should be on the same cpu */
-	get_cpu();
+	do {
+		seq = read_seqcount_begin(&ka->pvclock_sc);
 
-	data->flags = 0;
-	if (ka->use_master_clock &&
-	    (static_cpu_has(X86_FEATURE_CONSTANT_TSC) || __this_cpu_read(cpu_tsc_khz))) {
+		/* both __this_cpu_read() and rdtsc() should be on the same cpu */
+		get_cpu();
+
+		data->flags = 0;
+		if (ka->use_master_clock &&
+		    (static_cpu_has(X86_FEATURE_CONSTANT_TSC) || __this_cpu_read(cpu_tsc_khz))) {
 #ifdef CONFIG_X86_64
-		struct timespec64 ts;
+			struct timespec64 ts;
 
-		if (kvm_get_walltime_and_clockread(&ts, &data->host_tsc)) {
-			data->realtime = ts.tv_nsec + NSEC_PER_SEC * ts.tv_sec;
-			data->flags |= KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC;
-		} else
+			if (kvm_get_walltime_and_clockread(&ts, &data->host_tsc)) {
+				data->realtime = ts.tv_nsec + NSEC_PER_SEC * ts.tv_sec;
+				data->flags |= KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC;
+			} else
 #endif
-		data->host_tsc = rdtsc();
-
-		data->flags |= KVM_CLOCK_TSC_STABLE;
-		hv_clock.tsc_timestamp = ka->master_cycle_now;
-		hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
-		kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
-				   &hv_clock.tsc_shift,
-				   &hv_clock.tsc_to_system_mul);
-		data->clock = __pvclock_read_cycles(&hv_clock, data->host_tsc);
-	} else {
-		data->clock = get_kvmclock_base_ns() + ka->kvmclock_offset;
-	}
-
-	put_cpu();
-}
-
-static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
-{
-	struct kvm_arch *ka = &kvm->arch;
-	unsigned seq;
+			data->host_tsc = rdtsc();
+
+			data->flags |= KVM_CLOCK_TSC_STABLE;
+			hv_clock.tsc_timestamp = ka->master_cycle_now;
+			hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
+			kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
+					   &hv_clock.tsc_shift,
+					   &hv_clock.tsc_to_system_mul);
+			data->clock = __pvclock_read_cycles(&hv_clock, data->host_tsc);
+		} else {
+			data->clock = get_kvmclock_base_ns() + ka->kvmclock_offset;
+		}
 
-	do {
-		seq = read_seqcount_begin(&ka->pvclock_sc);
-		__get_kvmclock(kvm, data);
+		put_cpu();
 	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
 }
 
-- 
2.55.0

[PATCH v7 06/36] KVM: x86: Drop CPU pinning in get_kvmclock()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

The master clock branch of get_kvmclock() pinned the task to a CPU so
that the rdtsc() and the __this_cpu_read(cpu_tsc_khz) would agree. But
ka->use_master_clock can only be true when the host clocksource is TSC
based, which in turn requires a stable, constant and synchronised TSC
across all CPUs.

Given that, the open-coded CONSTANT_TSC || cpu_tsc_khz check is
redundant (with CONSTANT_TSC, cpu_tsc_khz is tsc_khz on every CPU and
KVM does not even register the cpufreq notifier), and both the TSC read
and get_cpu_tsc_khz() are CPU-independent. Drop the condition and the
get_cpu()/put_cpu() pinning.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1a598e99852c..590a7ba723f7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1659,12 +1659,8 @@ static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
 	do {
 		seq = read_seqcount_begin(&ka->pvclock_sc);
 
-		/* both __this_cpu_read() and rdtsc() should be on the same cpu */
-		get_cpu();
-
 		data->flags = 0;
-		if (ka->use_master_clock &&
-		    (static_cpu_has(X86_FEATURE_CONSTANT_TSC) || __this_cpu_read(cpu_tsc_khz))) {
+		if (ka->use_master_clock) {
 #ifdef CONFIG_X86_64
 			struct timespec64 ts;
 
@@ -1685,8 +1681,6 @@ static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
 		} else {
 			data->clock = get_kvmclock_base_ns() + ka->kvmclock_offset;
 		}
-
-		put_cpu();
 	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
 }
 
-- 
2.55.0

[PATCH v7 07/36] KVM: x86: Restructure get_kvmclock()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Wrap the entire use_master_clock block in #ifdef CONFIG_X86_64, since
use_master_clock is never true on 32-bit (host_tsc_clocksource is only
set under CONFIG_X86_64), and declare hv_clock inside the block so it is
not left as an unused variable on 32-bit.

Use 'continue' on the master-clock success path so the non-master-clock
computation becomes the common tail, avoiding a goto and label. When the
clock read fails (e.g. clocksource transitioning away from TSC), fall
back to that path rather than proceeding with uninitialised data or
spinning in the seqcount loop.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 36 ++++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 590a7ba723f7..51908d7093ba 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1653,34 +1653,38 @@ static unsigned long get_cpu_tsc_khz(void)
 static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
 {
 	struct kvm_arch *ka = &kvm->arch;
-	struct pvclock_vcpu_time_info hv_clock;
 	unsigned int seq;
 
 	do {
 		seq = read_seqcount_begin(&ka->pvclock_sc);
 
 		data->flags = 0;
-		if (ka->use_master_clock) {
 #ifdef CONFIG_X86_64
+		if (ka->use_master_clock) {
+			struct pvclock_vcpu_time_info hv_clock;
 			struct timespec64 ts;
 
 			if (kvm_get_walltime_and_clockread(&ts, &data->host_tsc)) {
 				data->realtime = ts.tv_nsec + NSEC_PER_SEC * ts.tv_sec;
-				data->flags |= KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC;
-			} else
-#endif
-			data->host_tsc = rdtsc();
-
-			data->flags |= KVM_CLOCK_TSC_STABLE;
-			hv_clock.tsc_timestamp = ka->master_cycle_now;
-			hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
-			kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
-					   &hv_clock.tsc_shift,
-					   &hv_clock.tsc_to_system_mul);
-			data->clock = __pvclock_read_cycles(&hv_clock, data->host_tsc);
-		} else {
-			data->clock = get_kvmclock_base_ns() + ka->kvmclock_offset;
+				data->flags |= KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC | KVM_CLOCK_TSC_STABLE;
+
+				hv_clock.tsc_timestamp = ka->master_cycle_now;
+				hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
+				kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
+						   &hv_clock.tsc_shift,
+						   &hv_clock.tsc_to_system_mul);
+				data->clock = __pvclock_read_cycles(&hv_clock, data->host_tsc);
+				continue;
+			}
+
+			/*
+			 * Clock read failed (e.g. clocksource is transitioning
+			 * away from TSC). Fall back to the non-master-clock path
+			 * rather than spinning.
+			 */
 		}
+#endif
+		data->clock = get_kvmclock_base_ns() + ka->kvmclock_offset;
 	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
 }
 
-- 
2.55.0

[PATCH v7 08/36] KVM: x86: Fix KVM clock precision in get_kvmclock() with TSC scaling

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

When in master clock mode, the KVM clock is defined in terms of the
guest TSC. But get_kvmclock() was computing it from the host TSC
without applying TSC scaling, leading to a systemic drift from the
values the guest computes from its own TSC.

Store the VM's TSC scaling ratio in kvm_arch and precompute the
guest-TSC-based mul/shift in pvclock_update_vm_gtod_copy(). Use these
in get_kvmclock() to scale the host TSC delta to guest TSC before
converting to nanoseconds.

This avoids "definition C" of the KVM clock described in commit
710b3a30f407 ("KVM: x86/xen: Do not corrupt KVM clock in
kvm_xen_shared_info_init()").

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/include/asm/kvm_host.h |  4 +++
 arch/x86/kvm/x86.c              | 52 +++++++++++++++++++++++++++++----
 2 files changed, 51 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index bffce2167141..c3b97ca24a8c 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1236,6 +1236,7 @@ struct kvm_arch {
 	u64 last_tsc_write;
 	u32 last_tsc_khz;
 	u64 last_tsc_offset;
+	u64 last_tsc_scaling_ratio;
 	u64 cur_tsc_nsec;
 	u64 cur_tsc_write;
 	u64 cur_tsc_offset;
@@ -1251,6 +1252,9 @@ struct kvm_arch {
 	u64 master_kernel_ns;
 	u64 master_cycle_now;
 	struct ratelimit_state kvmclock_update_rs;
+	u64 master_tsc_scaling_ratio;
+	s8  master_tsc_shift;
+	u32 master_tsc_mul;
 
 #ifdef CONFIG_KVM_HYPERV
 	struct kvm_hv hyperv;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 51908d7093ba..c00b1e19c3af 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1247,6 +1247,7 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 	kvm->arch.last_tsc_write = tsc;
 	kvm->arch.last_tsc_khz = vcpu->arch.virtual_tsc_khz;
 	kvm->arch.last_tsc_offset = offset;
+	kvm->arch.last_tsc_scaling_ratio = vcpu->arch.l1_tsc_scaling_ratio;
 
 	vcpu->arch.last_guest_tsc = tsc;
 
@@ -1559,6 +1560,8 @@ static bool kvm_get_walltime_and_clockread(struct timespec64 *ts,
  *
  */
 
+static unsigned long get_cpu_tsc_khz(void);
+
 static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 {
 #ifdef CONFIG_X86_64
@@ -1582,9 +1585,30 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 				&& !ka->backwards_tsc_observed
 				&& !ka->boot_vcpu_runs_old_kvmclock;
 
-	if (ka->use_master_clock)
+	if (ka->use_master_clock) {
+		u64 tsc_hz;
+
 		atomic_set(&kvm_guest_has_master_clock, 1);
 
+		/*
+		 * Copy the scaling ratio and precompute the mul/shift for
+		 * converting guest TSC to nanoseconds. These are used by
+		 * get_kvmclock() to compute kvmclock from the host TSC
+		 * without needing a vCPU reference.
+		 */
+		ka->master_tsc_scaling_ratio = ka->last_tsc_scaling_ratio;
+		tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
+		if (tsc_hz && kvm_caps.has_tsc_control)
+			tsc_hz = kvm_scale_tsc(tsc_hz,
+					       ka->master_tsc_scaling_ratio);
+		if (tsc_hz)
+			kvm_get_time_scale(NSEC_PER_SEC, tsc_hz,
+					   &ka->master_tsc_shift,
+					   &ka->master_tsc_mul);
+		else
+			ka->use_master_clock = false;
+	}
+
 	vclock_mode = pvclock_gtod_data.clock.vclock_mode;
 	trace_kvm_update_master_clock(ka->use_master_clock, vclock_mode,
 					vcpus_matched);
@@ -1670,10 +1694,28 @@ static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
 
 				hv_clock.tsc_timestamp = ka->master_cycle_now;
 				hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
-				kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
-						   &hv_clock.tsc_shift,
-						   &hv_clock.tsc_to_system_mul);
-				data->clock = __pvclock_read_cycles(&hv_clock, data->host_tsc);
+
+				/*
+				 * Use the precomputed guest-TSC-based mul/shift
+				 * so that the kvmclock value matches what the
+				 * guest computes from its own TSC.
+				 */
+				hv_clock.tsc_shift = ka->master_tsc_shift;
+				hv_clock.tsc_to_system_mul = ka->master_tsc_mul;
+
+				if (kvm_caps.has_tsc_control) {
+					u64 tsc_delta = data->host_tsc - ka->master_cycle_now;
+
+					tsc_delta = kvm_scale_tsc(tsc_delta,
+								  ka->master_tsc_scaling_ratio);
+					data->clock = hv_clock.system_time +
+						pvclock_scale_delta(tsc_delta,
+								    hv_clock.tsc_to_system_mul,
+								    hv_clock.tsc_shift);
+				} else {
+					data->clock = __pvclock_read_cycles(&hv_clock,
+									    data->host_tsc);
+				}
 				continue;
 			}
 
-- 
2.55.0

[PATCH v7 09/36] KVM: x86: Use get_kvmclock() in kvm_get_wall_clock_epoch()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Now that get_kvmclock() correctly handles TSC scaling and captures both
wallclock and kvmclock from the same TSC reading,
kvm_get_wall_clock_epoch() can simply call it instead of duplicating
the pvclock computation.

This eliminates the last instance of the "definition C" kvmclock
calculation — as described in commit 710b3a30f407 ("KVM: x86/xen: Do
not corrupt KVM clock in kvm_xen_shared_info_init()") — which computed
nanoseconds directly from the host TSC without accounting for guest
TSC scaling.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 59 +++++++---------------------------------------
 1 file changed, 9 insertions(+), 50 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c00b1e19c3af..f7a9fb69e69d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1930,63 +1930,22 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
  * wallclock and kvmclock times, and subtracting one from the other.
  *
  * Fall back to using their values at slightly different moments by
- * calling ktime_get_real_ns() and get_kvmclock_ns() separately.
+ * calling ktime_get_real_ns() and get_kvmclock() separately.
  */
 uint64_t kvm_get_wall_clock_epoch(struct kvm *kvm)
 {
-#ifdef CONFIG_X86_64
-	struct pvclock_vcpu_time_info hv_clock;
-	struct kvm_arch *ka = &kvm->arch;
-	unsigned long seq, local_tsc_khz;
-	struct timespec64 ts;
-	uint64_t host_tsc;
-
-	do {
-		seq = read_seqcount_begin(&ka->pvclock_sc);
-
-		local_tsc_khz = 0;
-		if (!ka->use_master_clock)
-			break;
-
-		/*
-		 * The TSC read and the call to get_cpu_tsc_khz() must happen
-		 * on the same CPU.
-		 */
-		get_cpu();
-
-		local_tsc_khz = get_cpu_tsc_khz();
-
-		if (local_tsc_khz &&
-		    !kvm_get_walltime_and_clockread(&ts, &host_tsc))
-			local_tsc_khz = 0; /* Fall back to old method */
-
-		put_cpu();
-
-		/*
-		 * These values must be snapshotted within the seqcount loop.
-		 * After that, it's just mathematics which can happen on any
-		 * CPU at any time.
-		 */
-		hv_clock.tsc_timestamp = ka->master_cycle_now;
-		hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
+	struct kvm_clock_data data;
 
-	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
+	get_kvmclock(kvm, &data);
 
 	/*
-	 * If the conditions were right, and obtaining the wallclock+TSC was
-	 * successful, calculate the KVM clock at the corresponding time and
-	 * subtract one from the other to get the guest's epoch in nanoseconds
-	 * since 1970-01-01.
+	 * If get_kvmclock() captured both wallclock and kvmclock from the
+	 * same TSC reading, use them for a precise epoch calculation.
 	 */
-	if (local_tsc_khz) {
-		kvm_get_time_scale(NSEC_PER_SEC, local_tsc_khz * NSEC_PER_USEC,
-				   &hv_clock.tsc_shift,
-				   &hv_clock.tsc_to_system_mul);
-		return ts.tv_nsec + NSEC_PER_SEC * ts.tv_sec -
-			__pvclock_read_cycles(&hv_clock, host_tsc);
-	}
-#endif
-	return ktime_get_real_ns() - get_kvmclock_ns(kvm);
+	if (data.flags & KVM_CLOCK_REALTIME)
+		return data.realtime - data.clock;
+
+	return ktime_get_real_ns() - data.clock;
 }
 
 /*
-- 
2.55.0

[PATCH v7 10/36] KVM: x86: Fix compute_guest_tsc() to handle negative time deltas

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

The compute_guest_tsc() function computes the guest TSC at a given
kernel_ns timestamp. When the master clock reference point
(master_kernel_ns) is earlier than vcpu->arch.this_tsc_nsec, the delta
is negative. Since pvclock_scale_delta() takes a u64, the negative
value wraps to a huge positive number, producing a wildly wrong result.

Handle negative deltas explicitly by scaling the absolute value of the
delta and applying it to this_tsc_write with the appropriate sign.

This is believed to be unreachable in practice; no path has been
identified which invokes compute_guest_tsc() with a timestamp from
before the vCPU's TSC generation was established. Fix it for
robustness, in the spirit of defence in depth.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f7a9fb69e69d..52c9268007f8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1054,11 +1054,15 @@ static int kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz)
 
 static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
 {
-	u64 tsc = pvclock_scale_delta(kernel_ns-vcpu->arch.this_tsc_nsec,
-				      vcpu->arch.virtual_tsc_mult,
-				      vcpu->arch.virtual_tsc_shift);
-	tsc += vcpu->arch.this_tsc_write;
-	return tsc;
+	s64 delta_ns = kernel_ns - vcpu->arch.this_tsc_nsec;
+	u64 tsc;
+
+	/* Handle negative deltas gracefully (master clock ref may be earlier) */
+	tsc = pvclock_scale_delta(abs(delta_ns),
+				  vcpu->arch.virtual_tsc_mult,
+				  vcpu->arch.virtual_tsc_shift);
+
+	return vcpu->arch.this_tsc_write + (delta_ns >= 0 ? tsc : -tsc);
 }
 
 #ifdef CONFIG_X86_64
-- 
2.55.0

[PATCH v7 11/36] KVM: x86: Restructure kvm_guest_time_update() for TSC upscaling

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Restructure kvm_guest_time_update() so that kernel_ns/host_tsc are
always "now" when doing TSC catchup, then swap in the master clock
reference values afterward for the hv_clock.

This makes the TSC upscaling code considerably simpler: the catchup
adjustment is computed as the delta between what the guest TSC *should*
be at "now" and what it actually is, rather than mixing "now" and
"master clock reference" timestamps.

The seqcount loop now also contains the kvm_get_time_and_clockread()
call (matching get_kvmclock's pattern).

Based on a suggestion by Sean Christopherson.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 78 ++++++++++++++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 24 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 52c9268007f8..12c3d7d503ca 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1793,45 +1793,60 @@ static void kvm_setup_guest_pvclock(struct pvclock_vcpu_time_info *ref_hv_clock,
 int kvm_guest_time_update(struct kvm_vcpu *v)
 {
 	struct pvclock_vcpu_time_info hv_clock = {};
-	unsigned long flags;
 	u64 tgt_tsc_hz;
 	unsigned seq;
 	struct kvm_vcpu_arch *vcpu = &v->arch;
 	struct kvm_arch *ka = &v->kvm->arch;
 	s64 kernel_ns;
 	u64 tsc_timestamp, host_tsc;
+	u64 master_host_tsc = 0;
+	s64 master_kernel_ns = 0;
+	s64 kvmclock_offset = 0;
 	bool use_master_clock;
 
-	kernel_ns = 0;
-	host_tsc = 0;
-
 	/*
 	 * If the host uses TSC clock, then passthrough TSC as stable
 	 * to the guest.
 	 */
 	do {
 		seq = read_seqcount_begin(&ka->pvclock_sc);
+
 		use_master_clock = ka->use_master_clock;
+
+		/*
+		 * The TSC read and the call to get_cpu_tsc_khz() must happen
+		 * on the same CPU.
+		 */
+		get_cpu();
+
+		tgt_tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
+
+#ifdef CONFIG_X86_64
+		if (use_master_clock &&
+		    !kvm_get_time_and_clockread(&kernel_ns, &host_tsc) &&
+		    !read_seqcount_retry(&ka->pvclock_sc, seq))
+			use_master_clock = false;
+#endif
+
+		put_cpu();
+
 		if (use_master_clock) {
-			host_tsc = ka->master_cycle_now;
-			kernel_ns = ka->master_kernel_ns;
+			master_host_tsc = ka->master_cycle_now;
+			master_kernel_ns = ka->master_kernel_ns;
+		} else {
+			local_irq_disable();
+			host_tsc = rdtsc();
+			kernel_ns = get_kvmclock_base_ns();
+			local_irq_enable();
 		}
+
+		kvmclock_offset = ka->kvmclock_offset;
 	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
 
-	/* Keep irq disabled to prevent changes to the clock */
-	local_irq_save(flags);
-	tgt_tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
 	if (unlikely(tgt_tsc_hz == 0)) {
-		local_irq_restore(flags);
 		kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
 		return 1;
 	}
-	if (!use_master_clock) {
-		host_tsc = rdtsc();
-		kernel_ns = get_kvmclock_base_ns();
-	}
-
-	tsc_timestamp = kvm_read_l1_tsc(v, host_tsc);
 
 	/*
 	 * We may have to catch up the TSC to match elapsed wall clock
@@ -1841,17 +1856,32 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
 	 *      entry to avoid unknown leaps of TSC even when running
 	 *      again on the same CPU.  This may cause apparent elapsed
 	 *      time to disappear, and the guest to stand still or run
-	 *	very slowly.
+	 *      very slowly.
 	 */
 	if (vcpu->tsc_catchup) {
-		u64 tsc = compute_guest_tsc(v, kernel_ns);
-		if (tsc > tsc_timestamp) {
-			adjust_tsc_offset_guest(v, tsc - tsc_timestamp);
-			tsc_timestamp = tsc;
-		}
+		s64 adjustment;
+
+		/*
+		 * Calculate the delta between what the guest TSC *should* be
+		 * and what it actually is according to kvm_read_l1_tsc().
+		 */
+		adjustment = compute_guest_tsc(v, kernel_ns) -
+			     kvm_read_l1_tsc(v, host_tsc);
+		if (adjustment > 0)
+			adjust_tsc_offset_guest(v, adjustment);
 	}
 
-	local_irq_restore(flags);
+	/*
+	 * Now that TSC upscaling is out of the way, the remaining calculations
+	 * are all relative to the reference time that's placed in hv_clock.
+	 * If the master clock is NOT in use, the reference time is "now".  If
+	 * master clock is in use, the reference time comes from there.
+	 */
+	if (use_master_clock) {
+		host_tsc = master_host_tsc;
+		kernel_ns = master_kernel_ns;
+	}
+	tsc_timestamp = kvm_read_l1_tsc(v, host_tsc);
 
 	/* With all the info we got, fill in the values */
 
@@ -1871,7 +1901,7 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
 	hv_clock.tsc_shift = vcpu->pvclock_tsc_shift;
 	hv_clock.tsc_to_system_mul = vcpu->pvclock_tsc_mul;
 	hv_clock.tsc_timestamp = tsc_timestamp;
-	hv_clock.system_time = kernel_ns + v->kvm->arch.kvmclock_offset;
+	hv_clock.system_time = kernel_ns + kvmclock_offset;
 	vcpu->last_guest_tsc = tsc_timestamp;
 
 	/* If the host uses TSC clocksource, then it is stable */
-- 
2.55.0

[PATCH v7 12/36] KVM: x86: Simplify and comment kvm_get_time_scale()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

The kvm_get_time_scale() function was entirely opaque. Add comments
explaining what it does: compute a fixed-point multiplier and shift for
converting TSC ticks to nanoseconds via pvclock_scale_delta().

Rename the local variables from the cryptic tps64/tps32/scaled64 to
base_hz_u64/base32/scaled_hz_u64 to make the code self-documenting.
The "tps32" name stood for "Ticks Per Second" but was misleading since
it held the shifted base frequency, not a tick count.

No functional change.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/x86.c | 55 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 12c3d7d503ca..77feed979b59 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -938,32 +938,57 @@ static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
 	return dividend;
 }
 
-static void kvm_get_time_scale(uint64_t scaled_hz, uint64_t base_hz,
+static void kvm_get_time_scale(u64 scaled_hz, u64 base_hz,
 			       s8 *pshift, u32 *pmultiplier)
 {
-	uint64_t scaled64;
-	int32_t  shift = 0;
-	uint64_t tps64;
-	uint32_t tps32;
+	u64 scaled_hz_u64 = scaled_hz;
+	s32 shift = 0;
+	u64 base_hz_u64;
+	u32 base32;
 
-	tps64 = base_hz;
-	scaled64 = scaled_hz;
-	while (tps64 > scaled64*2 || tps64 & 0xffffffff00000000ULL) {
-		tps64 >>= 1;
+	/*
+	 * This function calculates a fixed-point multiplier and shift such
+	 * that:
+	 *   time_ns = (tsc_cycles << shift) * multiplier >> 32
+	 *
+	 * Where tsc_cycles tick at base_hz, and time_ns should count at
+	 * scaled_hz (typically NSEC_PER_SEC for a TSC→nanoseconds conversion).
+	 *
+	 * The multiplier is: (scaled_hz << 32) / base_hz, adjusted by shift
+	 * to keep everything in range.
+	 */
+
+	base_hz_u64 = base_hz;
+
+	/*
+	 * Start by shifting base_hz right until it fits in 32 bits, and
+	 * is lower than double the target rate. This introduces a negative
+	 * shift value which would result in pvclock_scale_delta() shifting
+	 * the actual tick count right before performing the multiplication.
+	 */
+	while (base_hz_u64 > scaled_hz_u64 * 2 || base_hz_u64 >> 32) {
+		base_hz_u64 >>= 1;
 		shift--;
 	}
 
-	tps32 = (uint32_t)tps64;
-	while (tps32 <= scaled64 || scaled64 & 0xffffffff00000000ULL) {
-		if (scaled64 & 0xffffffff00000000ULL || tps32 & 0x80000000)
-			scaled64 >>= 1;
+	/* Now the shifted base_hz fits in 32 bits. */
+	base32 = (u32)base_hz_u64;
+
+	/*
+	 * Next, shift scaled_hz right until it fits in 32 bits, and ensure
+	 * that the shifted base_hz is strictly larger (so that the result of the
+	 * final division also fits in 32 bits).
+	 */
+	while (base32 <= scaled_hz_u64 || scaled_hz_u64 >> 32) {
+		if (scaled_hz_u64 >> 32 || base32 & BIT(31))
+			scaled_hz_u64 >>= 1;
 		else
-			tps32 <<= 1;
+			base32 <<= 1;
 		shift++;
 	}
 
 	*pshift = shift;
-	*pmultiplier = div_frac(scaled64, tps32);
+	*pmultiplier = div_frac(scaled_hz_u64, base32);
 }
 
 #ifdef CONFIG_X86_64
-- 
2.55.0

[PATCH v7 13/36] KVM: x86: Remove implicit rdtsc() from kvm_compute_l1_tsc_offset()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Let the callers pass the host TSC value in as an explicit parameter.
This leaves some fairly obviously stupid code, which is using this
function to compare the guest TSC at some *other* time, with the
newly-minted TSC value from rdtsc(). Unless it's being used to measure
*elapsed* time, that isn't very sensible.

In this case, "obviously stupid" is an improvement over being
non-obviously so.

No functional change intended.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/msrs.c |  3 ++-
 arch/x86/kvm/x86.c  | 11 ++++++-----
 arch/x86/kvm/x86.h  |  3 ++-
 3 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/msrs.c b/arch/x86/kvm/msrs.c
index 66fa7140d65d..22ceb39d41f6 100644
--- a/arch/x86/kvm/msrs.c
+++ b/arch/x86/kvm/msrs.c
@@ -1631,7 +1631,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		if (msr_info->host_initiated) {
 			kvm_synchronize_tsc(vcpu, &data);
 		} else if (!vcpu->arch.guest_tsc_protected) {
-			u64 adj = kvm_compute_l1_tsc_offset(vcpu, data) - vcpu->arch.l1_tsc_offset;
+			u64 adj = kvm_compute_l1_tsc_offset(vcpu, rdtsc(), data) -
+				  vcpu->arch.l1_tsc_offset;
 			adjust_tsc_offset_guest(vcpu, adj);
 			vcpu->arch.ia32_tsc_adjust_msr += adj;
 		}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 77feed979b59..c4fd2367686c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1153,11 +1153,12 @@ u64 kvm_scale_tsc(u64 tsc, u64 ratio)
 	return _tsc;
 }
 
-u64 kvm_compute_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
+u64 kvm_compute_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 host_tsc,
+			      u64 target_tsc)
 {
 	u64 tsc;
 
-	tsc = kvm_scale_tsc(rdtsc(), vcpu->arch.l1_tsc_scaling_ratio);
+	tsc = kvm_scale_tsc(host_tsc, vcpu->arch.l1_tsc_scaling_ratio);
 
 	return target_tsc - tsc;
 }
@@ -1319,7 +1320,7 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 	bool synchronizing = false;
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
-	offset = kvm_compute_l1_tsc_offset(vcpu, data);
+	offset = kvm_compute_l1_tsc_offset(vcpu, rdtsc(), data);
 	ns = get_kvmclock_base_ns();
 	elapsed = ns - kvm->arch.last_tsc_nsec;
 
@@ -1368,7 +1369,7 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 		} else {
 			u64 delta = nsec_to_cycles(vcpu, elapsed);
 			data += delta;
-			offset = kvm_compute_l1_tsc_offset(vcpu, data);
+			offset = kvm_compute_l1_tsc_offset(vcpu, rdtsc(), data);
 		}
 		matched = true;
 	}
@@ -2628,7 +2629,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 			mark_tsc_unstable("KVM discovered backwards TSC");
 
 		if (kvm_check_tsc_unstable()) {
-			u64 offset = kvm_compute_l1_tsc_offset(vcpu,
+			u64 offset = kvm_compute_l1_tsc_offset(vcpu, rdtsc(),
 						vcpu->arch.last_guest_tsc);
 			kvm_vcpu_write_tsc_offset(vcpu, offset);
 			if (!vcpu->arch.guest_tsc_protected)
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 0f5919b092e4..1d9a66048b01 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -335,7 +335,8 @@ u64 kvm_scale_tsc(u64 tsc, u64 ratio);
 u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc);
 u64 kvm_calc_nested_tsc_offset(u64 l1_offset, u64 l2_offset, u64 l2_multiplier);
 u64 kvm_calc_nested_tsc_multiplier(u64 l1_multiplier, u64 l2_multiplier);
-u64 kvm_compute_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc);
+u64 kvm_compute_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 host_tsc,
+			      u64 target_tsc);
 void kvm_vcpu_write_tsc_offset(struct kvm_vcpu *vcpu, u64 l1_offset);
 
 static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu,
-- 
2.55.0

[PATCH v7 14/36] KVM: x86: Improve synchronization in kvm_synchronize_tsc()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

When synchronizing to an existing TSC (either by explicitly writing
zero, or the legacy hack where the TSC is written within one second's
worth of the previously written TSC), the last_tsc_write and
last_tsc_nsec values were being misrecorded by __kvm_synchronize_tsc().
The *unsynchronized* value of the TSC (perhaps even zero) was being
recorded, along with the current time at which kvm_synchronize_tsc()
was called. This could cause *subsequent* writes to fail to synchronize
correctly.

Fix that by resetting {data, ns} to the previous values before passing
them to __kvm_synchronize_tsc() when synchronization is detected.
Except in the case where the TSC is unstable and *has* to be synthesised
from the host clock, in which case attempt to create a nsec/tsc pair
which is on the correct line.

Furthermore, there were *three* different TSC reads used for calculating
the "current" time, all slightly different from each other. Fix that by
using kvm_get_time_and_clockread() where possible and using the same
host_tsc value in all cases.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/x86.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c4fd2367686c..812657f7c984 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -209,6 +209,10 @@ module_param(pi_inject_timer, bint, 0644);
 static bool __read_mostly mitigate_smt_rsb;
 module_param(mitigate_smt_rsb, bool, 0444);
 
+#ifdef CONFIG_X86_64
+static bool kvm_get_time_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp);
+#endif
+
 #define KVM_SUPPORTED_XCR0     (XFEATURE_MASK_FP | XFEATURE_MASK_SSE \
 				| XFEATURE_MASK_YMM | XFEATURE_MASK_BNDREGS \
 				| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512 \
@@ -1314,14 +1318,23 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 {
 	u64 data = user_value ? *user_value : 0;
 	struct kvm *kvm = vcpu->kvm;
-	u64 offset, ns, elapsed;
+	u64 offset, host_tsc, elapsed;
+	s64 ns;
 	unsigned long flags;
 	bool matched = false;
 	bool synchronizing = false;
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
-	offset = kvm_compute_l1_tsc_offset(vcpu, rdtsc(), data);
-	ns = get_kvmclock_base_ns();
+
+#ifdef CONFIG_X86_64
+	if (!kvm_get_time_and_clockread(&ns, &host_tsc))
+#endif
+	{
+		host_tsc = rdtsc();
+		ns = get_kvmclock_base_ns();
+	}
+
+	offset = kvm_compute_l1_tsc_offset(vcpu, host_tsc, data);
 	elapsed = ns - kvm->arch.last_tsc_nsec;
 
 	if (vcpu->arch.virtual_tsc_khz) {
@@ -1364,13 +1377,18 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
          */
 	if (synchronizing &&
 	    vcpu->arch.virtual_tsc_khz == kvm->arch.last_tsc_khz) {
-		if (!kvm_check_tsc_unstable()) {
+		/*
+		 * If synchronizing, advance the reference point to "now"
+		 * so the matching window slides forward with each vCPU.
+		 */
+		u64 delta = nsec_to_cycles(vcpu, elapsed);
+
+		data = kvm->arch.cur_tsc_write + delta;
+
+		if (!kvm_check_tsc_unstable())
 			offset = kvm->arch.cur_tsc_offset;
-		} else {
-			u64 delta = nsec_to_cycles(vcpu, elapsed);
-			data += delta;
-			offset = kvm_compute_l1_tsc_offset(vcpu, rdtsc(), data);
-		}
+		else
+			offset = kvm_compute_l1_tsc_offset(vcpu, host_tsc, data);
 		matched = true;
 	}
 
-- 
2.55.0

[PATCH v7 15/36] KVM: x86: Kill last_tsc_{nsec,write,offset} fields

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

These pointlessly duplicate the cur_tsc_{nsec,write,offset} values.
The only place they were used was where the TSC is stable and a new
vCPU is being synchronized to the previous setting, in which case the
cur_tsc_* value is definitely identical.

Rename last_tsc_khz and last_tsc_scaling_ratio to cur_tsc_khz and
cur_tsc_scaling_ratio respectively, since they are properties of the
current TSC generation.

Since cur_tsc_offset now serves as the single source of truth for the
TSC generation's offset, the backwards-TSC adjustment (used during S4
resume when the host TSC resets) must also update cur_tsc_offset by the
same delta applied to all vCPUs. Without this, subsequent vCPUs that
synchronize after the adjustment would get the stale pre-S4 offset.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/include/asm/kvm_host.h |  7 ++---
 arch/x86/kvm/x86.c              | 45 +++++++++++++++++----------------
 2 files changed, 25 insertions(+), 27 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c3b97ca24a8c..2f01f3f9ba97 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1232,11 +1232,8 @@ struct kvm_arch {
 	 * preemption-disabled region, so it must be a raw spinlock.
 	 */
 	raw_spinlock_t tsc_write_lock;
-	u64 last_tsc_nsec;
-	u64 last_tsc_write;
-	u32 last_tsc_khz;
-	u64 last_tsc_offset;
-	u64 last_tsc_scaling_ratio;
+	u32 cur_tsc_khz;
+	u64 cur_tsc_scaling_ratio;
 	u64 cur_tsc_nsec;
 	u64 cur_tsc_write;
 	u64 cur_tsc_offset;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 812657f7c984..dceb6d3660a2 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1274,14 +1274,12 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 		vcpu->kvm->arch.user_set_tsc = true;
 
 	/*
-	 * We also track th most recent recorded KHZ, write and time to
-	 * allow the matching interval to be extended at each write.
+	 * Track the TSC frequency, scaling ratio, and offset for the current
+	 * generation. These are used to detect matching TSC writes and to
+	 * compute the guest TSC from the host clock.
 	 */
-	kvm->arch.last_tsc_nsec = ns;
-	kvm->arch.last_tsc_write = tsc;
-	kvm->arch.last_tsc_khz = vcpu->arch.virtual_tsc_khz;
-	kvm->arch.last_tsc_offset = offset;
-	kvm->arch.last_tsc_scaling_ratio = vcpu->arch.l1_tsc_scaling_ratio;
+	kvm->arch.cur_tsc_khz = vcpu->arch.virtual_tsc_khz;
+	kvm->arch.cur_tsc_scaling_ratio = vcpu->arch.l1_tsc_scaling_ratio;
 
 	vcpu->arch.last_guest_tsc = tsc;
 
@@ -1294,8 +1292,6 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 		 * nanosecond time, offset, and write, so if TSCs are in
 		 * sync, we can match exact offset, and if not, we can match
 		 * exact software computation in compute_guest_tsc()
-		 *
-		 * These values are tracked in kvm->arch.cur_xxx variables.
 		 */
 		kvm->arch.cur_tsc_generation++;
 		kvm->arch.cur_tsc_nsec = ns;
@@ -1335,7 +1331,7 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 	}
 
 	offset = kvm_compute_l1_tsc_offset(vcpu, host_tsc, data);
-	elapsed = ns - kvm->arch.last_tsc_nsec;
+	elapsed = ns - kvm->arch.cur_tsc_nsec;
 
 	if (vcpu->arch.virtual_tsc_khz) {
 		if (data == 0) {
@@ -1345,7 +1341,7 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 			 */
 			synchronizing = true;
 		} else if (kvm->arch.user_set_tsc) {
-			u64 tsc_exp = kvm->arch.last_tsc_write +
+			u64 tsc_exp = kvm->arch.cur_tsc_write +
 						nsec_to_cycles(vcpu, elapsed);
 			u64 tsc_hz = vcpu->arch.virtual_tsc_khz * 1000LL;
 			/*
@@ -1376,7 +1372,7 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 	 * it's better to try to match offsets from the beginning.
          */
 	if (synchronizing &&
-	    vcpu->arch.virtual_tsc_khz == kvm->arch.last_tsc_khz) {
+	    vcpu->arch.virtual_tsc_khz == kvm->arch.cur_tsc_khz) {
 		/*
 		 * If synchronizing, advance the reference point to "now"
 		 * so the matching window slides forward with each vCPU.
@@ -1644,7 +1640,7 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 		 * get_kvmclock() to compute kvmclock from the host TSC
 		 * without needing a vCPU reference.
 		 */
-		ka->master_tsc_scaling_ratio = ka->last_tsc_scaling_ratio;
+		ka->master_tsc_scaling_ratio = ka->cur_tsc_scaling_ratio;
 		tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
 		if (tsc_hz && kvm_caps.has_tsc_control)
 			tsc_hz = kvm_scale_tsc(tsc_hz,
@@ -3376,8 +3372,8 @@ static int kvm_arch_tsc_set_attr(struct kvm_vcpu *vcpu,
 		raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
 
 		matched = (vcpu->arch.virtual_tsc_khz &&
-			   kvm->arch.last_tsc_khz == vcpu->arch.virtual_tsc_khz &&
-			   kvm->arch.last_tsc_offset == offset);
+			   kvm->arch.cur_tsc_khz == vcpu->arch.virtual_tsc_khz &&
+			   kvm->arch.cur_tsc_offset == offset);
 
 		tsc = kvm_scale_tsc(rdtsc(), vcpu->arch.l1_tsc_scaling_ratio) + offset;
 		ns = get_kvmclock_base_ns();
@@ -9748,7 +9744,7 @@ int kvm_arch_enable_virtualization_cpu(void)
 {
 	struct kvm *kvm;
 	struct kvm_vcpu *vcpu;
-	unsigned long i;
+	unsigned long i, flags;
 	int ret;
 	u64 local_tsc;
 	u64 max_tsc = 0;
@@ -9827,13 +9823,18 @@ int kvm_arch_enable_virtualization_cpu(void)
 			}
 
 			/*
-			 * We have to disable TSC offset matching.. if you were
-			 * booting a VM while issuing an S4 host suspend....
-			 * you may have some problem.  Solving this issue is
-			 * left as an exercise to the reader.
+			 * Adjust the TSC matching reference by the same
+			 * delta applied to each vCPU's offset, so that
+			 * future KVM_SET_TSC / vCPU creation still matches
+			 * correctly against the adjusted TSC timeline.
+			 * Scale from host to guest TSC rate.
 			 */
-			kvm->arch.last_tsc_nsec = 0;
-			kvm->arch.last_tsc_write = 0;
+			raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
+			kvm->arch.cur_tsc_write -=
+				kvm_scale_tsc(delta_cyc,
+					      kvm->arch.cur_tsc_scaling_ratio);
+			kvm->arch.cur_tsc_offset += delta_cyc;
+			raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
 		}
 
 	}
-- 
2.55.0

[PATCH v7 16/36] KVM: x86: Replace nr_vcpus_matched_tsc count with all_vcpus_matched_tsc bool

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Using a count and comparing with kvm->online_vcpus was always racy
because a new vCPU could be created while kvm_track_tsc_matching() was
running and comparing with kvm->online_vcpus. That variable is only
atomic with respect to itself; kvm_arch_vcpu_create() runs before
kvm->online_vcpus is incremented for the new vCPU.

Replace the count with a boolean that is set in kvm_track_tsc_matching()
after comparing the count, and cleared when a new TSC generation starts.
The boolean is consumed by pvclock_update_vm_gtod_copy() under the
tsc_write_lock, which serializes against __kvm_synchronize_tsc().

Keep the count for now as it's still used in the trace event.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/x86.c              | 10 ++++++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 2f01f3f9ba97..46919fe1cf4b 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1238,6 +1238,7 @@ struct kvm_arch {
 	u64 cur_tsc_write;
 	u64 cur_tsc_offset;
 	u64 cur_tsc_generation;
+	bool all_vcpus_matched_tsc;
 	int nr_vcpus_matched_tsc;
 
 	u32 default_tsc_khz;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index dceb6d3660a2..d3c4009b92bc 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1112,8 +1112,10 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool new_generation)
 	 * and all vCPUs must have matching TSCs.  Note, the count for matching
 	 * vCPUs doesn't include the reference vCPU, hence "+1".
 	 */
-	bool use_master_clock = (ka->nr_vcpus_matched_tsc + 1 ==
-				 atomic_read(&vcpu->kvm->online_vcpus)) &&
+	ka->all_vcpus_matched_tsc = (ka->nr_vcpus_matched_tsc + 1 ==
+				     atomic_read(&vcpu->kvm->online_vcpus));
+
+	bool use_master_clock = ka->all_vcpus_matched_tsc &&
 				gtod_is_based_on_tsc(gtod->clock.vclock_mode);
 
 	/*
@@ -1298,6 +1300,7 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 		kvm->arch.cur_tsc_write = tsc;
 		kvm->arch.cur_tsc_offset = offset;
 		kvm->arch.nr_vcpus_matched_tsc = 0;
+		kvm->arch.all_vcpus_matched_tsc = false;
 	} else if (vcpu->arch.this_tsc_generation != kvm->arch.cur_tsc_generation) {
 		kvm->arch.nr_vcpus_matched_tsc++;
 	}
@@ -1614,8 +1617,7 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 	bool host_tsc_clocksource, vcpus_matched;
 
 	lockdep_assert_held(&kvm->arch.tsc_write_lock);
-	vcpus_matched = (ka->nr_vcpus_matched_tsc + 1 ==
-			atomic_read(&kvm->online_vcpus));
+	vcpus_matched = ka->all_vcpus_matched_tsc;
 
 	/*
 	 * If the host uses TSC clock, then passthrough TSC as stable
-- 
2.55.0

[PATCH v7 17/36] KVM: x86: Allow KVM master clock mode when TSCs are offset from each other

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Previously, a guest writing different TSC values on different vCPUs could
force KVM out of master clock mode. With this change, only a frequency
mismatch disables master clock. The only ways for non-master-clock mode
to happen now are archaic hardware without a TSC-based clocksource, a
VMM that sets different TSC frequencies across vCPUs, or a guest using
the legacy MSR_KVM_SYSTEM_TIME (which could be addressed in future by
simply updating tsc_timestamp more frequently rather than falling out of
master clock mode entirely).

Running at a different frequency would lead to a systemic skew between
the clock(s) as observed by different vCPUs due to arithmetic precision
in the scaling. So that should indeed force the clock to be based on the
host's CLOCK_MONOTONIC_RAW instead of being in masterclock mode where it
is defined by the guest TSC.

But when the vCPUs merely have a different TSC *offset*, that's not a
problem. The offset is applied to that vCPU's kvmclock->tsc_timestamp
field, and it all comes out in the wash.

Track frequency matching separately from offset matching using a
dedicated freq generation counter (cur_tsc_freq_generation) that only
bumps on actual frequency changes. Each vCPU is counted exactly once per
freq generation via a per-vCPU this_tsc_freq_generation field, preventing
repeated syncs of the same vCPU from falsely re-enabling master clock.

Note that the generation-based counting has a known limitation: if all
vCPUs are in sync and one changes away and then back again, the other
vCPUs are still at the old generation and won't be counted until they
sync again (which may never happen). This was always the case for the
offset tracking and isn't expected VMM behaviour — although it is the
scenario that the VM-wide KVM_SET_TSC_KHZ ioctl was introduced to handle
cleanly.

While at it, restructure the existing TSC offset generation tracking to
use the same pattern: reset counter to zero on new generation, then
unconditionally count vCPUs that haven't been seen in this generation.
Both counters now use a consistent >= online_vcpus threshold (1-based
counting where the reference vCPU is included in the count).

Use frequency match for master clock eligibility, and full TSC match
(including offset) only for PVCLOCK_TSC_STABLE_BIT, which tells the
guest it is safe to skip cross-vCPU monotonicity enforcement.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/include/asm/kvm_host.h |  4 ++
 arch/x86/kvm/x86.c              | 80 +++++++++++++++++++++++++--------
 2 files changed, 65 insertions(+), 19 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 46919fe1cf4b..293b7cfeb316 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -884,6 +884,7 @@ struct kvm_vcpu_arch {
 	u64 this_tsc_nsec;
 	u64 this_tsc_write;
 	u64 this_tsc_generation;
+	u64 this_tsc_freq_generation;
 	bool tsc_catchup;
 	bool tsc_always_catchup;
 	s8 virtual_tsc_shift;
@@ -1239,6 +1240,9 @@ struct kvm_arch {
 	u64 cur_tsc_offset;
 	u64 cur_tsc_generation;
 	bool all_vcpus_matched_tsc;
+	bool all_vcpus_matched_freq;
+	int nr_vcpus_matched_freq;
+	u64 cur_tsc_freq_generation;
 	int nr_vcpus_matched_tsc;
 
 	u32 default_tsc_khz;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d3c4009b92bc..7615e1cd5835 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1101,30 +1101,55 @@ static inline bool gtod_is_based_on_tsc(int mode)
 }
 #endif
 
-static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool new_generation)
+static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 {
 #ifdef CONFIG_X86_64
 	struct kvm_arch *ka = &vcpu->kvm->arch;
 	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
+	bool prev_matched_tsc = ka->all_vcpus_matched_tsc;
 
 	/*
-	 * To use the masterclock, the host clocksource must be based on TSC
-	 * and all vCPUs must have matching TSCs.  Note, the count for matching
-	 * vCPUs doesn't include the reference vCPU, hence "+1".
+	 * Track whether all vCPUs have matching TSC offsets (for
+	 * PVCLOCK_TSC_STABLE_BIT) and matching frequencies (for
+	 * master clock eligibility).
+	 */
+
+	/*
+	 * A new vCPU might already have incremented ->online_vcpus
+	 * and cause a temporary false negative here. But will then
+	 * call kvm_synchronize_tsc() from kvm_arch_vcpu_postcreate()
+	 * and finish the job.
 	 */
-	ka->all_vcpus_matched_tsc = (ka->nr_vcpus_matched_tsc + 1 ==
-				     atomic_read(&vcpu->kvm->online_vcpus));
+	int online = atomic_read(&vcpu->kvm->online_vcpus);
+	ka->all_vcpus_matched_tsc = (ka->nr_vcpus_matched_tsc >= online);
+
+	update_mclock |= (prev_matched_tsc != ka->all_vcpus_matched_tsc);
 
-	bool use_master_clock = ka->all_vcpus_matched_tsc &&
+	/*
+	 * all_vcpus_matched_freq starts true and is cleared when
+	 * __kvm_synchronize_tsc() detects a frequency mismatch.
+	 * Re-enable when all vCPUs have synced with matching frequency.
+	 * If all offsets also match, that implies frequencies match too.
+	 */
+	if (ka->all_vcpus_matched_tsc ||
+	    ka->nr_vcpus_matched_freq >= online)
+		ka->all_vcpus_matched_freq = true;
+
+	/*
+	 * To use the masterclock, the host clocksource must be based on TSC
+	 * and all vCPUs must have matching TSC *frequency*. Different offsets
+	 * are fine — each vCPU's pvclock has its own tsc_timestamp that
+	 * accounts for its offset.
+	 */
+	bool use_master_clock = ka->all_vcpus_matched_freq &&
 				gtod_is_based_on_tsc(gtod->clock.vclock_mode);
 
 	/*
-	 * Request a masterclock update if the masterclock needs to be toggled
-	 * on/off, or when starting a new generation and the masterclock is
-	 * enabled (compute_guest_tsc() requires the masterclock snapshot to be
-	 * taken _after_ the new generation is created).
+	 * Request a masterclock update if needed: toggling master clock,
+	 * new generation requiring a fresh snapshot, or a change in
+	 * all_vcpus_matched_tsc (to broadcast PVCLOCK_TSC_STABLE_BIT).
 	 */
-	if ((ka->use_master_clock && new_generation) ||
+	if ((ka->use_master_clock && update_mclock) ||
 	    (ka->use_master_clock != use_master_clock))
 		kvm_make_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
 
@@ -1279,7 +1304,22 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 	 * Track the TSC frequency, scaling ratio, and offset for the current
 	 * generation. These are used to detect matching TSC writes and to
 	 * compute the guest TSC from the host clock.
+	 *
+	 * If the frequency changed, master clock mode can no longer be used
+	 * since the kvmclock scaling factors differ between vCPUs.
 	 */
+	if (vcpu->arch.virtual_tsc_khz != kvm->arch.cur_tsc_khz) {
+		kvm->arch.cur_tsc_freq_generation++;
+		kvm->arch.all_vcpus_matched_freq = false;
+		kvm->arch.nr_vcpus_matched_freq = 0;
+	}
+
+	/* Count each vCPU once per freq generation */
+	if (vcpu->arch.this_tsc_freq_generation != kvm->arch.cur_tsc_freq_generation) {
+		vcpu->arch.this_tsc_freq_generation = kvm->arch.cur_tsc_freq_generation;
+		kvm->arch.nr_vcpus_matched_freq++;
+	}
+
 	kvm->arch.cur_tsc_khz = vcpu->arch.virtual_tsc_khz;
 	kvm->arch.cur_tsc_scaling_ratio = vcpu->arch.l1_tsc_scaling_ratio;
 
@@ -1296,17 +1336,18 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
 		 * exact software computation in compute_guest_tsc()
 		 */
 		kvm->arch.cur_tsc_generation++;
+		kvm->arch.all_vcpus_matched_tsc = false;
+		kvm->arch.nr_vcpus_matched_tsc = 0;
 		kvm->arch.cur_tsc_nsec = ns;
 		kvm->arch.cur_tsc_write = tsc;
 		kvm->arch.cur_tsc_offset = offset;
-		kvm->arch.nr_vcpus_matched_tsc = 0;
-		kvm->arch.all_vcpus_matched_tsc = false;
-	} else if (vcpu->arch.this_tsc_generation != kvm->arch.cur_tsc_generation) {
+	}
+
+	if (vcpu->arch.this_tsc_generation != kvm->arch.cur_tsc_generation) {
+		vcpu->arch.this_tsc_generation = kvm->arch.cur_tsc_generation;
 		kvm->arch.nr_vcpus_matched_tsc++;
 	}
 
-	/* Keep track of which generation this VCPU has synchronized to */
-	vcpu->arch.this_tsc_generation = kvm->arch.cur_tsc_generation;
 	vcpu->arch.this_tsc_nsec = kvm->arch.cur_tsc_nsec;
 	vcpu->arch.this_tsc_write = kvm->arch.cur_tsc_write;
 
@@ -1617,7 +1658,7 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 	bool host_tsc_clocksource, vcpus_matched;
 
 	lockdep_assert_held(&kvm->arch.tsc_write_lock);
-	vcpus_matched = ka->all_vcpus_matched_tsc;
+	vcpus_matched = ka->all_vcpus_matched_freq;
 
 	/*
 	 * If the host uses TSC clock, then passthrough TSC as stable
@@ -1948,7 +1989,7 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
 
 	/* If the host uses TSC clocksource, then it is stable */
 	hv_clock.flags = 0;
-	if (use_master_clock)
+	if (use_master_clock && ka->all_vcpus_matched_tsc)
 		hv_clock.flags |= PVCLOCK_TSC_STABLE_BIT;
 
 	if (vcpu->pv_time.active) {
@@ -9938,6 +9979,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	ratelimit_state_init(&kvm->arch.kvmclock_update_rs, HZ, 10);
 	ratelimit_set_flags(&kvm->arch.kvmclock_update_rs, RATELIMIT_MSG_ON_RELEASE);
 	kvm->arch.kvmclock_offset = -get_kvmclock_base_ns();
+	kvm->arch.all_vcpus_matched_freq = true;
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
 	pvclock_update_vm_gtod_copy(kvm);
-- 
2.55.0

[PATCH v7 18/36] KVM: x86: Factor out kvm_use_master_clock()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Both kvm_track_tsc_matching() and pvclock_update_vm_gtod_copy() make a
decision about whether the KVM clock should be in master clock mode.
They used *different* criteria for the decision though. This isn't
really a problem; it only has the potential to cause unnecessary
invocations of KVM_REQ_MASTERCLOCK_UPDATE if the masterclock was
disabled due to TSC going backwards, or the guest using the old MSR.
But it isn't pretty.

Factor the decision out to a single function. And document the
historical reason why it's disabled for guests that use the old
MSR_KVM_SYSTEM_TIME.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/x86.c | 40 ++++++++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7615e1cd5835..ce80ee808777 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1099,11 +1099,30 @@ static inline bool gtod_is_based_on_tsc(int mode)
 {
 	return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK;
 }
-#endif
+
+static bool kvm_use_master_clock(struct kvm *kvm)
+{
+	struct kvm_arch *ka = &kvm->arch;
+
+	/*
+	 * The 'old kvmclock' check is a workaround (from 2015) for a
+	 * SUSE 2.6.16 kernel that didn't boot if the system_time in
+	 * its kvmclock was too far behind the current time. So the
+	 * mode of just setting the reference point and allowing time
+	 * to proceed linearly from there makes it fail to boot.
+	 * Despite that being kind of the *point* of the way the clock
+	 * is exposed to the guest. By coincidence, the offending
+	 * kernels used the old MSR_KVM_SYSTEM_TIME, which was moved
+	 * only because it resided in the wrong number range. So the
+	 * workaround is activated for *all* guests using the old MSR.
+	 */
+	return ka->all_vcpus_matched_freq &&
+		!ka->backwards_tsc_observed &&
+		!ka->boot_vcpu_runs_old_kvmclock;
+}
 
 static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 {
-#ifdef CONFIG_X86_64
 	struct kvm_arch *ka = &vcpu->kvm->arch;
 	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
 	bool prev_matched_tsc = ka->all_vcpus_matched_tsc;
@@ -1141,7 +1160,7 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 	 * are fine — each vCPU's pvclock has its own tsc_timestamp that
 	 * accounts for its offset.
 	 */
-	bool use_master_clock = ka->all_vcpus_matched_freq &&
+	bool use_master_clock = kvm_use_master_clock(vcpu->kvm) &&
 				gtod_is_based_on_tsc(gtod->clock.vclock_mode);
 
 	/*
@@ -1156,8 +1175,11 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 	trace_kvm_track_tsc(vcpu->vcpu_id, ka->nr_vcpus_matched_tsc,
 			    atomic_read(&vcpu->kvm->online_vcpus),
 		            ka->use_master_clock, gtod->clock.vclock_mode);
-#endif
 }
+#else
+static inline void kvm_track_tsc_matching(struct kvm_vcpu *vcpu,
+					  bool new_generation) {}
+#endif
 
 /*
  * Multiply tsc by a fixed point number represented by ratio.
@@ -1655,10 +1677,9 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 #ifdef CONFIG_X86_64
 	struct kvm_arch *ka = &kvm->arch;
 	int vclock_mode;
-	bool host_tsc_clocksource, vcpus_matched;
+	bool host_tsc_clocksource;
 
 	lockdep_assert_held(&kvm->arch.tsc_write_lock);
-	vcpus_matched = ka->all_vcpus_matched_freq;
 
 	/*
 	 * If the host uses TSC clock, then passthrough TSC as stable
@@ -1668,9 +1689,8 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 					&ka->master_kernel_ns,
 					&ka->master_cycle_now);
 
-	ka->use_master_clock = host_tsc_clocksource && vcpus_matched
-				&& !ka->backwards_tsc_observed
-				&& !ka->boot_vcpu_runs_old_kvmclock;
+	ka->use_master_clock = host_tsc_clocksource &&
+				kvm_use_master_clock(kvm);
 
 	if (ka->use_master_clock) {
 		u64 tsc_hz;
@@ -1698,7 +1718,7 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 
 	vclock_mode = pvclock_gtod_data.clock.vclock_mode;
 	trace_kvm_update_master_clock(ka->use_master_clock, vclock_mode,
-					vcpus_matched);
+					ka->all_vcpus_matched_freq);
 #endif
 }
 
-- 
2.55.0

[PATCH v7 19/36] KVM: x86: Avoid gratuitous global clock updates

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Eliminate two sources of unnecessary KVM_REQ_GLOBAL_CLOCK_UPDATE:

1. kvm_write_system_time(): The global clock update was a workaround for
   ever-drifting clocks based on the host's CLOCK_MONOTONIC subject to
   NTP skew. Now that the KVM clock uses CLOCK_MONOTONIC_RAW, the clock
   does not drift with NTP corrections and there is no need to
   synchronize all vCPUs on boot or resume. Use KVM_REQ_CLOCK_UPDATE on
   the vCPU itself, and only when the clock is being enabled, not
   disabled.

2. kvm_arch_vcpu_load(): In master clock mode, migration between pCPUs
   does not require any clock update since the master clock reference is
   shared. Only request a local KVM_REQ_CLOCK_UPDATE for the vCPU's
   first-ever load (vcpu->cpu == -1) to generate initial pvclock params.
   In non-master-clock mode, keep the global update to synchronize all
   vCPUs.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/msrs.c | 6 +++---
 arch/x86/kvm/x86.c  | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/msrs.c b/arch/x86/kvm/msrs.c
index 22ceb39d41f6..0806863fc68e 100644
--- a/arch/x86/kvm/msrs.c
+++ b/arch/x86/kvm/msrs.c
@@ -1275,13 +1275,13 @@ static void kvm_write_system_time(struct kvm_vcpu *vcpu, gpa_t system_time,
 	}
 
 	vcpu->arch.time = system_time;
-	kvm_make_request(KVM_REQ_GLOBAL_CLOCK_UPDATE, vcpu);
 
 	/* we verify if the enable bit is set... */
-	if (system_time & 1)
+	if (system_time & 1) {
 		kvm_gpc_activate(&vcpu->arch.pv_time, system_time & ~1ULL,
 				 sizeof(struct pvclock_vcpu_time_info));
-	else
+		kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
+	} else
 		kvm_gpc_deactivate(&vcpu->arch.pv_time);
 
 	return;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index ce80ee808777..83db915ef1d4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2720,13 +2720,13 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		 * On a host with synchronized TSC, there is no need to update
 		 * kvmclock on vcpu->cpu migration
 		 */
-		if (!vcpu->kvm->arch.use_master_clock || vcpu->cpu == -1) {
+		if (!vcpu->kvm->arch.use_master_clock) {
 			if (__ratelimit(&vcpu->kvm->arch.kvmclock_update_rs))
 				kvm_make_request(KVM_REQ_GLOBAL_CLOCK_UPDATE, vcpu);
 			else
 				kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
-		}
-
+		} else if (vcpu->cpu == -1)
+			kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
 		if (vcpu->cpu != cpu)
 			kvm_make_request(KVM_REQ_MIGRATE_TIMER, vcpu);
 		vcpu->cpu = cpu;
-- 
2.55.0

[PATCH v7 20/36] KVM: x86/xen: Prevent runstate times from becoming negative

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

When kvm_xen_update_runstate() is invoked to set a vCPU's runstate, the
time spent in the previous runstate is accounted. This is based on the
delta between the current KVM clock time, and the previous value stored
in vcpu->arch.xen.runstate_entry_time.

If the KVM clock goes backwards, that delta will be negative. Or, since
it's an unsigned 64-bit integer, very *large*. Linux guests deal with
that particularly badly, reporting 100% steal time for ever more (well,
for *centuries* at least, until the delta has been consumed).

So when a negative delta is detected, just refrain from updating the
runstate times until the KVM clock catches up with runstate_entry_time
again.

Also clamp steal_ns to delta_ns to prevent steal time from exceeding
the total elapsed time, and handle negative steal_ns (which can happen
if run_delay goes backwards across a scheduler update).

The userspace APIs for setting the runstate times do not allow them to
be set past the current KVM clock, but userspace can still adjust the
KVM clock *after* setting the runstate times, which would cause this
situation to occur.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 arch/x86/kvm/xen.c | 28 ++++++++++++++++++++++------
 1 file changed, 22 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
index f2c6757fc1fa..998cdcb6aa30 100644
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -587,29 +587,45 @@ void kvm_xen_update_runstate(struct kvm_vcpu *v, int state)
 {
 	struct kvm_vcpu_xen *vx = &v->arch.xen;
 	u64 now = get_kvmclock_ns(v->kvm);
-	u64 delta_ns = now - vx->runstate_entry_time;
 	u64 run_delay = current->sched_info.run_delay;
+	s64 delta_ns = now - vx->runstate_entry_time;
+	s64 steal_ns = run_delay - vx->last_steal;
 
+	/*
+	 * If the vCPU was never run before, its prior state should
+	 * be considered RUNSTATE_offline.
+	 */
 	if (unlikely(!vx->runstate_entry_time))
 		vx->current_runstate = RUNSTATE_offline;
 
+	/*
+	 * If KVM clock went backwards, just update the current runstate
+	 * but don't account any time. Leave entry_time unchanged so the
+	 * next positive delta covers the full period once the clock
+	 * catches up. Update last_steal every time so stolen time only
+	 * reflects the interval since the most recent call.
+	 */
+	if (delta_ns < 0)
+		goto update_guest;
+
 	/*
 	 * Time waiting for the scheduler isn't "stolen" if the
 	 * vCPU wasn't running anyway.
 	 */
-	if (vx->current_runstate == RUNSTATE_running) {
-		u64 steal_ns = run_delay - vx->last_steal;
+	if (vx->current_runstate == RUNSTATE_running && steal_ns > 0) {
+		if (steal_ns > delta_ns)
+			steal_ns = delta_ns;
 
 		delta_ns -= steal_ns;
-
 		vx->runstate_times[RUNSTATE_runnable] += steal_ns;
 	}
-	vx->last_steal = run_delay;
 
 	vx->runstate_times[vx->current_runstate] += delta_ns;
-	vx->current_runstate = state;
 	vx->runstate_entry_time = now;
 
+ update_guest:
+	vx->current_runstate = state;
+	vx->last_steal = run_delay;
 	if (vx->runstate_cache.active)
 		kvm_xen_update_runstate_guest(v, state == RUNSTATE_runnable);
 }
-- 
2.55.0

[PATCH v7 21/36] KVM: x86: Avoid redundant masterclock updates from multiple vCPUs

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

When a masterclock update is triggered (e.g. by the clocksource change
notifier), KVM_REQ_MASTERCLOCK_UPDATE is set on all vCPUs. Without this
fix, each vCPU independently processes the request and redundantly
re-executes the entire pvclock_update_vm_gtod_copy() sequence, serialized
only by tsc_write_lock. Each redundant re-snapshot of the master clock
reference point introduces potential clock drift.

Fix this by having __kvm_start_pvclock_update() check, after acquiring
the lock, whether the requesting vCPU's KVM_REQ_MASTERCLOCK_UPDATE is
still set. If another vCPU already did the update and cleared it, bail
out. Otherwise, clear the request on all other vCPUs before proceeding.

The caller in vcpu_enter_guest() now uses kvm_test_request() (non-clearing)
since the clearing is done inside __kvm_start_pvclock_update() under the
lock.

Suggested-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
---
 arch/x86/kvm/x86.c | 60 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 14 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 83db915ef1d4..06f968007f1a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1727,10 +1727,39 @@ static void kvm_make_mclock_inprogress_request(struct kvm *kvm)
 	kvm_make_all_cpus_request(kvm, KVM_REQ_MCLOCK_INPROGRESS);
 }
 
-static void __kvm_start_pvclock_update(struct kvm *kvm)
+static void kvm_clear_mclock_inprogress_request(struct kvm *kvm)
 {
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_clear_request(KVM_REQ_MCLOCK_INPROGRESS, vcpu);
+}
+
+static bool __kvm_start_pvclock_update(struct kvm *kvm, struct kvm_vcpu *requesting_vcpu)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
 	raw_spin_lock_irq(&kvm->arch.tsc_write_lock);
+
+	/*
+	 * If another vCPU already did the update while we were waiting
+	 * for the lock, our request will have been cleared. Bail out.
+	 */
+	if (requesting_vcpu &&
+	    !kvm_test_request(KVM_REQ_MASTERCLOCK_UPDATE, requesting_vcpu)) {
+		kvm_clear_mclock_inprogress_request(kvm);
+		raw_spin_unlock_irq(&kvm->arch.tsc_write_lock);
+		return false;
+	}
+
+	/* The update is VM-wide; prevent other vCPUs from redoing it. */
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_clear_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
+
 	write_seqcount_begin(&kvm->arch.pvclock_sc);
+	return true;
 }
 
 static void kvm_start_pvclock_update(struct kvm *kvm)
@@ -1738,7 +1767,7 @@ static void kvm_start_pvclock_update(struct kvm *kvm)
 	kvm_make_mclock_inprogress_request(kvm);
 
 	/* no guest entries from this point */
-	__kvm_start_pvclock_update(kvm);
+	__kvm_start_pvclock_update(kvm, NULL);
 }
 
 static void kvm_end_pvclock_update(struct kvm *kvm)
@@ -1747,22 +1776,25 @@ static void kvm_end_pvclock_update(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 	unsigned long i;
 
-	write_seqcount_end(&ka->pvclock_sc);
-	raw_spin_unlock_irq(&ka->tsc_write_lock);
 	kvm_for_each_vcpu(i, vcpu, kvm)
 		kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
 
 	/* guest entries allowed */
-	kvm_for_each_vcpu(i, vcpu, kvm)
-		kvm_clear_request(KVM_REQ_MCLOCK_INPROGRESS, vcpu);
+	kvm_clear_mclock_inprogress_request(kvm);
+
+	write_seqcount_end(&ka->pvclock_sc);
+	raw_spin_unlock_irq(&ka->tsc_write_lock);
 }
 
-static void kvm_update_masterclock(struct kvm *kvm)
+static void kvm_update_masterclock(struct kvm *kvm, struct kvm_vcpu *vcpu)
 {
 	kvm_hv_request_tsc_page_update(kvm);
-	kvm_start_pvclock_update(kvm);
-	pvclock_update_vm_gtod_copy(kvm);
-	kvm_end_pvclock_update(kvm);
+	kvm_make_mclock_inprogress_request(kvm);
+
+	if (__kvm_start_pvclock_update(kvm, vcpu)) {
+		pvclock_update_vm_gtod_copy(kvm);
+		kvm_end_pvclock_update(kvm);
+	}
 }
 
 /*
@@ -6822,7 +6854,7 @@ static void kvm_hyperv_tsc_notifier(void)
 	kvm_caps.max_guest_tsc_khz = tsc_khz;
 
 	list_for_each_entry(kvm, &vm_list, vm_list) {
-		__kvm_start_pvclock_update(kvm);
+		__kvm_start_pvclock_update(kvm, NULL);
 		pvclock_update_vm_gtod_copy(kvm);
 		kvm_end_pvclock_update(kvm);
 	}
@@ -8204,8 +8236,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			kvm_mmu_free_obsolete_roots(vcpu);
 		if (kvm_check_request(KVM_REQ_MIGRATE_TIMER, vcpu))
 			__kvm_migrate_timers(vcpu);
-		if (kvm_check_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu))
-			kvm_update_masterclock(vcpu->kvm);
+		if (kvm_test_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu))
+			kvm_update_masterclock(vcpu->kvm, vcpu);
 		if (kvm_check_request(KVM_REQ_GLOBAL_CLOCK_UPDATE, vcpu))
 			kvm_gen_kvmclock_update(vcpu);
 		if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, vcpu)) {
@@ -9557,7 +9589,7 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 	vcpu_load(vcpu);
 	kvm_synchronize_tsc(vcpu, NULL);
 	if (!vcpu->kvm->arch.use_master_clock)
-		kvm_update_masterclock(vcpu->kvm);
+		kvm_update_masterclock(vcpu->kvm, NULL);
 	vcpu_put(vcpu);
 
 	/* poll control enabled by default */
-- 
2.55.0

[PATCH v7 22/36] KVM: x86: Remove runtime Xen TSC frequency CPUID update

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Remove the code in kvm_cpuid() that dynamically updates the Xen TSC
info CPUID leaf at runtime. This code was updating the wrong sub-leaf
anyway (0x40000x03/2 EAX is the *host* TSC frequency per the Xen ABI,
not the guest frequency which belongs in 0x40000x03/0 ECX).

Userspace now has all the information it needs to populate the Xen TSC
info leaves (and the generic 0x40000010 timing leaf) at vCPU setup time:

  - KVM_GET_CLOCK_GUEST returns the pvclock_vcpu_time_info structure
    containing tsc_to_system_mul and tsc_shift (Xen leaf index 1)
  - KVM_VCPU_TSC_SCALE returns the effective TSC and bus
    frequencies in kHz (Xen leaf index 2, and 0x40000010)
  - KVM_VCPU_TSC_SCALE returns the raw hardware scaling ratio for
    precise arithmetic (VMClock)

This eliminates the last instance of KVM modifying guest CPUID entries
at runtime for timing information.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/cpuid.c | 17 -----------------
 arch/x86/kvm/xen.h   | 13 -------------
 2 files changed, 30 deletions(-)

diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 7049f5a5597b..ddb022cb203a 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -16,7 +16,6 @@
 #include <linux/vmalloc.h>
 #include <linux/uaccess.h>
 #include <linux/sched/stat.h>
-#include <linux/units.h>
 
 #include <asm/processor.h>
 #include <asm/user.h>
@@ -2133,22 +2132,6 @@ bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx,
 		} else if (function == 0x80000007) {
 			if (kvm_hv_invtsc_suppressed(vcpu))
 				*edx &= ~feature_bit(CONSTANT_TSC);
-		} else if (IS_ENABLED(CONFIG_KVM_XEN) &&
-			   kvm_xen_is_tsc_leaf(vcpu, function)) {
-			/*
-			 * Update guest TSC frequency information if necessary.
-			 * Ignore failures, there is no sane value that can be
-			 * provided if KVM can't get the TSC frequency.
-			 */
-			if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, vcpu))
-				kvm_guest_time_update(vcpu);
-
-			if (index == 1) {
-				*ecx = vcpu->arch.pvclock_tsc_mul;
-				*edx = vcpu->arch.pvclock_tsc_shift;
-			} else if (index == 2) {
-				*eax = div_u64(vcpu->arch.hw_tsc_hz, HZ_PER_KHZ);
-			}
 		}
 	} else {
 		*eax = *ebx = *ecx = *edx = 0;
diff --git a/arch/x86/kvm/xen.h b/arch/x86/kvm/xen.h
index 59e6128a7bd3..f372855857a8 100644
--- a/arch/x86/kvm/xen.h
+++ b/arch/x86/kvm/xen.h
@@ -50,14 +50,6 @@ static inline void kvm_xen_sw_enable_lapic(struct kvm_vcpu *vcpu)
 		kvm_xen_inject_vcpu_vector(vcpu);
 }
 
-static inline bool kvm_xen_is_tsc_leaf(struct kvm_vcpu *vcpu, u32 function)
-{
-	return static_branch_unlikely(&kvm_xen_enabled.key) &&
-	       vcpu->arch.xen.cpuid.base &&
-	       function <= vcpu->arch.xen.cpuid.limit &&
-	       function == (vcpu->arch.xen.cpuid.base | XEN_CPUID_LEAF(3));
-}
-
 static inline bool kvm_xen_msr_enabled(struct kvm *kvm)
 {
 	return static_branch_unlikely(&kvm_xen_enabled.key) &&
@@ -177,11 +169,6 @@ static inline bool kvm_xen_timer_enabled(struct kvm_vcpu *vcpu)
 {
 	return false;
 }
-
-static inline bool kvm_xen_is_tsc_leaf(struct kvm_vcpu *vcpu, u32 function)
-{
-	return false;
-}
 #endif
 
 int kvm_xen_hypercall(struct kvm_vcpu *vcpu);
-- 
2.55.0

[PATCH v7 23/36] KVM: x86: Re-synchronize TSC after KVM_SET_TSC_KHZ

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

KVM_SET_TSC_KHZ changes the vCPU's TSC scaling ratio but does not
update the VM-wide cur_tsc_scaling_ratio used by get_kvmclock().
This causes get_kvmclock() to use a stale (default 1:1) ratio when
computing the KVM clock, leading to drift between the host-side
kvmclock and what the guest observes.

Fix this by calling kvm_synchronize_tsc() after changing the TSC
frequency. This:
 - Updates cur_tsc_scaling_ratio (consumed by pvclock_update_vm_gtod_copy)
 - Ensures the TSC value is continuous across the frequency change
 - Triggers kvm_track_tsc_matching() for proper masterclock handling
 - Allows subsequent vCPUs to synchronize via the 1-second slop hack

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 arch/x86/kvm/x86.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 06f968007f1a..3e8cc8daf848 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -212,7 +212,6 @@ module_param(mitigate_smt_rsb, bool, 0444);
 #ifdef CONFIG_X86_64
 static bool kvm_get_time_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp);
 #endif
-
 #define KVM_SUPPORTED_XCR0     (XFEATURE_MASK_FP | XFEATURE_MASK_SSE \
 				| XFEATURE_MASK_YMM | XFEATURE_MASK_BNDREGS \
 				| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512 \
@@ -1051,6 +1050,7 @@ static int kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz)
 {
 	u32 thresh_lo, thresh_hi;
 	int use_scaling = 0;
+	u64 tsc;
 
 	/* tsc_khz can be zero if TSC calibration fails */
 	if (user_tsc_khz == 0) {
@@ -1078,7 +1078,17 @@ static int kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz)
 			 user_tsc_khz, thresh_lo, thresh_hi);
 		use_scaling = 1;
 	}
-	return set_tsc_khz(vcpu, user_tsc_khz, use_scaling);
+	/*
+	 * Read the guest TSC before changing the ratio, so we can
+	 * re-synchronize to preserve continuity across the change.
+	 */
+	tsc = kvm_read_l1_tsc(vcpu, rdtsc());
+
+	if (set_tsc_khz(vcpu, user_tsc_khz, use_scaling))
+		return -1;
+
+	kvm_synchronize_tsc(vcpu, &tsc);
+	return 0;
 }
 
 static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
-- 
2.55.0

[PATCH v7 24/36] KVM: x86: Use ktime_get_snapshot_id() for master clock

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Replace the KVM-private vgettsc()/do_kvmclock_base()/do_monotonic()/
do_realtime() timekeeping reimplementation with calls to the generic
ktime_get_snapshot_id() interface.

The snapshot provides both the system time and the raw_cycles (TSC)
atomically paired. When raw_cycles is zero, the clocksource could not
provide a raw hardware counter value, which is equivalent to the
previous vgettsc() returning VDSO_CLOCKMODE_NONE.

For kvm_get_time_and_clockread(), the kvmclock base time is
CLOCK_MONOTONIC_RAW + offs_boot. The snapshot provides the raw time
atomically paired with the TSC; offs_boot is added separately as it
only changes at suspend/resume boundaries.

This is a step towards eliminating the pvclock_gtod_data private copy
of timekeeping state and the associated notifier callback.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Assisted-by: Kiro:claude-opus-4.6-1m
---
 arch/x86/kvm/x86.c | 53 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 42 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3e8cc8daf848..74776dd497f2 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -35,6 +35,7 @@
 #include "smm.h"
 
 #include <linux/clocksource.h>
+#include <linux/timekeeping.h>
 #include <linux/interrupt.h>
 #include <linux/kvm.h>
 #include <linux/fs.h>
@@ -1597,14 +1598,39 @@ static int do_realtime(struct timespec64 *ts, u64 *tsc_timestamp)
  * reports the TSC value from which it do so. Returns true if host is
  * using TSC based clocksource.
  */
+static bool kvm_snapshot_has_tsc(struct system_time_snapshot *snap,
+				u64 *tsc_timestamp)
+{
+	/*
+	 * ktime_get_snapshot_id() cannot fail for standard clock IDs
+	 * (only for invalid/aux clocks or during suspend, with a WARN).
+	 */
+	if (!snap->valid)
+		return false;
+
+	if (snap->cs_id == CSID_X86_TSC) {
+		*tsc_timestamp = snap->cycles;
+		return true;
+	}
+
+	if (snap->hw_csid == CSID_X86_TSC && snap->hw_cycles) {
+		*tsc_timestamp = snap->hw_cycles;
+		return true;
+	}
+
+	return false;
+}
+
 static bool kvm_get_time_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
 {
-	/* checked again under seqlock below */
-	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode))
+	struct system_time_snapshot snap = {};
+
+	ktime_get_snapshot_id(CLOCK_MONOTONIC_RAW, &snap);
+	if (!kvm_snapshot_has_tsc(&snap, tsc_timestamp))
 		return false;
 
-	return gtod_is_based_on_tsc(do_kvmclock_base(kernel_ns,
-						     tsc_timestamp));
+	*kernel_ns = ktime_to_ns(ktime_mono_to_any(snap.systime, TK_OFFS_BOOT));
+	return true;
 }
 
 /*
@@ -1613,12 +1639,14 @@ static bool kvm_get_time_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
  */
 bool kvm_get_monotonic_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
 {
-	/* checked again under seqlock below */
-	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode))
+	struct system_time_snapshot snap = {};
+
+	ktime_get_snapshot_id(CLOCK_MONOTONIC, &snap);
+	if (!kvm_snapshot_has_tsc(&snap, tsc_timestamp))
 		return false;
 
-	return gtod_is_based_on_tsc(do_monotonic(kernel_ns,
-						 tsc_timestamp));
+	*kernel_ns = ktime_to_ns(snap.systime);
+	return true;
 }
 
 /*
@@ -1631,11 +1659,14 @@ bool kvm_get_monotonic_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
 static bool kvm_get_walltime_and_clockread(struct timespec64 *ts,
 					   u64 *tsc_timestamp)
 {
-	/* checked again under seqlock below */
-	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode))
+	struct system_time_snapshot snap = {};
+
+	ktime_get_snapshot_id(CLOCK_REALTIME, &snap);
+	if (!kvm_snapshot_has_tsc(&snap, tsc_timestamp))
 		return false;
 
-	return gtod_is_based_on_tsc(do_realtime(ts, tsc_timestamp));
+	*ts = ktime_to_timespec64(snap.systime);
+	return true;
 }
 #endif
 
-- 
2.55.0

[PATCH v7 25/36] KVM: x86: Compute kvmclock base without pvclock_gtod_data

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

get_kvmclock_base_ns() needs CLOCK_MONOTONIC_RAW + offs_boot. Compute
this directly rather than reading offs_boot from the pvclock_gtod_data
private copy. offs_boot only changes at suspend/resume so does not
need to be atomically paired with the raw clock read.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Assisted-by: Kiro:claude-opus-4.6-1m
---
 arch/x86/kvm/x86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 74776dd497f2..a64e5a596a4e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -933,7 +933,7 @@ static void update_pvclock_gtod(struct timekeeper *tk)
 static s64 get_kvmclock_base_ns(void)
 {
 	/* Count up from boot time, but with the frequency of the raw clock.  */
-	return ktime_to_ns(ktime_add(ktime_get_raw(), pvclock_gtod_data.offs_boot));
+	return ktime_to_ns(ktime_mono_to_any(ktime_get_raw(), TK_OFFS_BOOT));
 }
 
 static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
-- 
2.55.0

[PATCH v7 26/36] KVM: x86: Cache host vclock_mode for masterclock eligibility checks

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

The remaining users of pvclock_gtod_data only need to know whether
the host clocksource is TSC-based. Cache the vclock_mode value in a
simple kvm_host_vclock_mode variable, updated by the pvclock_gtod_notify
callback, and use gtod_is_based_on_tsc() for eligibility checks.

This is inherently racy (as it always was — kvm_track_tsc_matching
never held the gtod seqcount), relying on eventual consistency: the
notifier fires on every timekeeping update and will correct any
transient inconsistency within one tick.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Assisted-by: Kiro (claude-opus-4.6-1m)
---
 arch/x86/kvm/x86.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a64e5a596a4e..ee992c073b6d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1106,6 +1106,8 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
 }
 
 #ifdef CONFIG_X86_64
+static int kvm_host_vclock_mode;
+
 static inline bool gtod_is_based_on_tsc(int mode)
 {
 	return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK;
@@ -1135,7 +1137,6 @@ static bool kvm_use_master_clock(struct kvm *kvm)
 static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 {
 	struct kvm_arch *ka = &vcpu->kvm->arch;
-	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
 	bool prev_matched_tsc = ka->all_vcpus_matched_tsc;
 
 	/*
@@ -1172,7 +1173,7 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 	 * accounts for its offset.
 	 */
 	bool use_master_clock = kvm_use_master_clock(vcpu->kvm) &&
-				gtod_is_based_on_tsc(gtod->clock.vclock_mode);
+				gtod_is_based_on_tsc(kvm_host_vclock_mode);
 
 	/*
 	 * Request a masterclock update if needed: toggling master clock,
@@ -1185,11 +1186,11 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
 
 	trace_kvm_track_tsc(vcpu->vcpu_id, ka->nr_vcpus_matched_tsc,
 			    atomic_read(&vcpu->kvm->online_vcpus),
-		            ka->use_master_clock, gtod->clock.vclock_mode);
+		            ka->use_master_clock, kvm_host_vclock_mode);
 }
 #else
 static inline void kvm_track_tsc_matching(struct kvm_vcpu *vcpu,
-					  bool new_generation) {}
+					  bool update_mclock) {}
 #endif
 
 /*
@@ -1309,7 +1310,7 @@ static inline bool kvm_check_tsc_unstable(void)
 	 * TSC is marked unstable when we're running on Hyper-V,
 	 * 'TSC page' clocksource is good.
 	 */
-	if (pvclock_gtod_data.clock.vclock_mode == VDSO_CLOCKMODE_HVCLOCK)
+	if (kvm_host_vclock_mode == VDSO_CLOCKMODE_HVCLOCK)
 		return false;
 #endif
 	return check_tsc_unstable();
@@ -1717,7 +1718,6 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 {
 #ifdef CONFIG_X86_64
 	struct kvm_arch *ka = &kvm->arch;
-	int vclock_mode;
 	bool host_tsc_clocksource;
 
 	lockdep_assert_held(&kvm->arch.tsc_write_lock);
@@ -1757,9 +1757,9 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 			ka->use_master_clock = false;
 	}
 
-	vclock_mode = pvclock_gtod_data.clock.vclock_mode;
-	trace_kvm_update_master_clock(ka->use_master_clock, vclock_mode,
-					ka->all_vcpus_matched_freq);
+	trace_kvm_update_master_clock(ka->use_master_clock,
+				     kvm_host_vclock_mode,
+				     ka->all_vcpus_matched_freq);
 #endif
 }
 
@@ -7075,12 +7075,15 @@ static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,
 	update_pvclock_gtod(tk);
 
 #ifdef CONFIG_X86_64
+	kvm_host_vclock_mode =
+		tk->tkr_mono.clock->vdso_clock_mode;
+
 	/*
 	 * Disable master clock if host does not trust, or does not use,
 	 * TSC based clocksource. Delegate queue_work() to irq_work as
 	 * this is invoked with tk_core.seq write held.
 	 */
-	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode) &&
+	if (!gtod_is_based_on_tsc(kvm_host_vclock_mode) &&
 	    atomic_read(&kvm_guest_has_master_clock) != 0)
 		irq_work_queue(&pvclock_irq_work);
 #endif
-- 
2.55.0

[PATCH v7 27/36] KVM: x86: Remove pvclock_gtod_data and private timekeeping code

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Remove the now-unused KVM-private timekeeping infrastructure:

 - struct pvclock_clock and struct pvclock_gtod_data
 - update_pvclock_gtod() and its seqcount-protected state copy
 - read_tsc() (KVM's private TSC reader with cycle_last clamping)
 - vgettsc() (KVM's private clocksource interpolation)
 - do_kvmclock_base(), do_monotonic(), do_realtime()

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Assisted-by: Kiro:claude-opus-4.6-1m
---
 arch/x86/kvm/x86.c | 178 +--------------------------------------------
 1 file changed, 1 insertion(+), 177 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index ee992c073b6d..e8e75e47fc33 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -878,58 +878,6 @@ static inline bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu)
 	       kvm_request_pending(vcpu) || xfer_to_guest_mode_work_pending();
 }
 
-struct pvclock_clock {
-	int vclock_mode;
-	u64 cycle_last;
-	u64 mask;
-	u32 mult;
-	u32 shift;
-	u64 base_cycles;
-	u64 offset;
-};
-
-struct pvclock_gtod_data {
-	seqcount_t	seq;
-
-	struct pvclock_clock clock; /* extract of a clocksource struct */
-	struct pvclock_clock raw_clock; /* extract of a clocksource struct */
-
-	ktime_t		offs_boot;
-	u64		wall_time_sec;
-};
-
-static struct pvclock_gtod_data pvclock_gtod_data;
-
-static void update_pvclock_gtod(struct timekeeper *tk)
-{
-	struct pvclock_gtod_data *vdata = &pvclock_gtod_data;
-
-	write_seqcount_begin(&vdata->seq);
-
-	/* copy pvclock gtod data */
-	vdata->clock.vclock_mode	= tk->tkr_mono.clock->vdso_clock_mode;
-	vdata->clock.cycle_last		= tk->tkr_mono.cycle_last;
-	vdata->clock.mask		= tk->tkr_mono.mask;
-	vdata->clock.mult		= tk->tkr_mono.mult;
-	vdata->clock.shift		= tk->tkr_mono.shift;
-	vdata->clock.base_cycles	= tk->tkr_mono.xtime_nsec;
-	vdata->clock.offset		= tk->tkr_mono.base;
-
-	vdata->raw_clock.vclock_mode	= tk->tkr_raw.clock->vdso_clock_mode;
-	vdata->raw_clock.cycle_last	= tk->tkr_raw.cycle_last;
-	vdata->raw_clock.mask		= tk->tkr_raw.mask;
-	vdata->raw_clock.mult		= tk->tkr_raw.mult;
-	vdata->raw_clock.shift		= tk->tkr_raw.shift;
-	vdata->raw_clock.base_cycles	= tk->tkr_raw.xtime_nsec;
-	vdata->raw_clock.offset		= tk->tkr_raw.base;
-
-	vdata->wall_time_sec            = tk->xtime_sec;
-
-	vdata->offs_boot		= tk->offs_boot;
-
-	write_seqcount_end(&vdata->seq);
-}
-
 static s64 get_kvmclock_base_ns(void)
 {
 	/* Count up from boot time, but with the frequency of the raw clock.  */
@@ -1472,128 +1420,6 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
 
 #ifdef CONFIG_X86_64
 
-static u64 read_tsc(void)
-{
-	u64 ret = (u64)rdtsc_ordered();
-	u64 last = pvclock_gtod_data.clock.cycle_last;
-
-	if (likely(ret >= last))
-		return ret;
-
-	/*
-	 * GCC likes to generate cmov here, but this branch is extremely
-	 * predictable (it's just a function of time and the likely is
-	 * very likely) and there's a data dependence, so force GCC
-	 * to generate a branch instead.  I don't barrier() because
-	 * we don't actually need a barrier, and if this function
-	 * ever gets inlined it will generate worse code.
-	 */
-	asm volatile ("");
-	return last;
-}
-
-static inline u64 vgettsc(struct pvclock_clock *clock, u64 *tsc_timestamp,
-			  int *mode)
-{
-	u64 tsc_pg_val;
-	long v;
-
-	switch (clock->vclock_mode) {
-	case VDSO_CLOCKMODE_HVCLOCK:
-		if (hv_read_tsc_page_tsc(hv_get_tsc_page(),
-					 tsc_timestamp, &tsc_pg_val)) {
-			/* TSC page valid */
-			*mode = VDSO_CLOCKMODE_HVCLOCK;
-			v = (tsc_pg_val - clock->cycle_last) &
-				clock->mask;
-		} else {
-			/* TSC page invalid */
-			*mode = VDSO_CLOCKMODE_NONE;
-		}
-		break;
-	case VDSO_CLOCKMODE_TSC:
-		*mode = VDSO_CLOCKMODE_TSC;
-		*tsc_timestamp = read_tsc();
-		v = (*tsc_timestamp - clock->cycle_last) &
-			clock->mask;
-		break;
-	default:
-		*mode = VDSO_CLOCKMODE_NONE;
-	}
-
-	if (*mode == VDSO_CLOCKMODE_NONE)
-		*tsc_timestamp = v = 0;
-
-	return v * clock->mult;
-}
-
-/*
- * As with get_kvmclock_base_ns(), this counts from boot time, at the
- * frequency of CLOCK_MONOTONIC_RAW (hence adding gtos->offs_boot).
- */
-static int do_kvmclock_base(s64 *t, u64 *tsc_timestamp)
-{
-	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
-	unsigned long seq;
-	int mode;
-	u64 ns;
-
-	do {
-		seq = read_seqcount_begin(&gtod->seq);
-		ns = gtod->raw_clock.base_cycles;
-		ns += vgettsc(&gtod->raw_clock, tsc_timestamp, &mode);
-		ns >>= gtod->raw_clock.shift;
-		ns += ktime_to_ns(ktime_add(gtod->raw_clock.offset, gtod->offs_boot));
-	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
-	*t = ns;
-
-	return mode;
-}
-
-/*
- * This calculates CLOCK_MONOTONIC at the time of the TSC snapshot, with
- * no boot time offset.
- */
-static int do_monotonic(s64 *t, u64 *tsc_timestamp)
-{
-	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
-	unsigned long seq;
-	int mode;
-	u64 ns;
-
-	do {
-		seq = read_seqcount_begin(&gtod->seq);
-		ns = gtod->clock.base_cycles;
-		ns += vgettsc(&gtod->clock, tsc_timestamp, &mode);
-		ns >>= gtod->clock.shift;
-		ns += ktime_to_ns(gtod->clock.offset);
-	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
-	*t = ns;
-
-	return mode;
-}
-
-static int do_realtime(struct timespec64 *ts, u64 *tsc_timestamp)
-{
-	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
-	unsigned long seq;
-	int mode;
-	u64 ns;
-
-	do {
-		seq = read_seqcount_begin(&gtod->seq);
-		ts->tv_sec = gtod->wall_time_sec;
-		ns = gtod->clock.base_cycles;
-		ns += vgettsc(&gtod->clock, tsc_timestamp, &mode);
-		ns >>= gtod->clock.shift;
-	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
-
-	ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
-	ts->tv_nsec = ns;
-
-	return mode;
-}
-
 /*
  * Calculates the kvmclock_base_ns (CLOCK_MONOTONIC_RAW + boot time) and
  * reports the TSC value from which it do so. Returns true if host is
@@ -7070,11 +6896,9 @@ static DEFINE_IRQ_WORK(pvclock_irq_work, pvclock_irq_work_fn);
 static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,
 			       void *priv)
 {
+#ifdef CONFIG_X86_64
 	struct timekeeper *tk = priv;
 
-	update_pvclock_gtod(tk);
-
-#ifdef CONFIG_X86_64
 	kvm_host_vclock_mode =
 		tk->tkr_mono.clock->vdso_clock_mode;
 
-- 
2.55.0

[PATCH v7 28/36] KVM: x86: Activate master clock from kvm_arch_init_vm()

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Initialize the TSC generation and master clock state at VM creation
time, rather than relying on kvm_update_masterclock() from
kvm_arch_vcpu_postcreate().

Set cur_tsc_generation=1, cur_tsc_khz, cur_tsc_scaling_ratio,
cur_tsc_offset, cur_tsc_nsec and kvmclock_offset from an atomic
ktime/TSC snapshot. This establishes a coherent epoch so that:

 - The first vCPU synchronizes to the existing generation (getting
   the pre-computed TSC offset) rather than computing its own.
 - pvclock_update_vm_gtod_copy() succeeds immediately (no zero
   tsc_hz from uninitialized cur_tsc_scaling_ratio).
 - KVM_GET_CLOCK returns valid {host_tsc, realtime} fields as soon
   as any vCPU exists.
 - KVM_[GS]ET_CLOCK_GUEST works without a prior KVM_RUN.
 - No O(N) iteration of all vCPUs on each vCPU creation.

This replaces the kvm_update_masterclock() call that was added to
kvm_arch_vcpu_postcreate() to work around the missing initialization.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Assisted-by: Kiro (claude-opus-4.6-1m)
---
 arch/x86/kvm/x86.c | 45 +++++++++++++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e8e75e47fc33..5c78dd1e4c69 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9456,8 +9456,6 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 		return;
 	vcpu_load(vcpu);
 	kvm_synchronize_tsc(vcpu, NULL);
-	if (!vcpu->kvm->arch.use_master_clock)
-		kvm_update_masterclock(vcpu->kvm, NULL);
 	vcpu_put(vcpu);
 
 	/* poll control enabled by default */
@@ -9867,6 +9865,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 {
 	int ret;
 	unsigned long flags;
+	u64 kvmclock_host_tsc;
+	s64 kvmclock_ns;
 
 	if (!kvm_is_vm_type_supported(type))
 		return -EINVAL;
@@ -9898,18 +9898,47 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	seqcount_raw_spinlock_init(&kvm->arch.pvclock_sc, &kvm->arch.tsc_write_lock);
 	ratelimit_state_init(&kvm->arch.kvmclock_update_rs, HZ, 10);
 	ratelimit_set_flags(&kvm->arch.kvmclock_update_rs, RATELIMIT_MSG_ON_RELEASE);
-	kvm->arch.kvmclock_offset = -get_kvmclock_base_ns();
-	kvm->arch.all_vcpus_matched_freq = true;
-
-	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
-	pvclock_update_vm_gtod_copy(kvm);
-	raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
 
 	kvm->arch.default_tsc_khz = max_tsc_khz ? : tsc_khz;
 	kvm->arch.apic_bus_cycle_ns = APIC_BUS_CYCLE_NS_DEFAULT;
 	kvm->arch.guest_can_read_msr_platform_info = true;
 	kvm->arch.enable_pmu = enable_pmu && !kvm->arch.has_protected_pmu;
 
+	kvm->arch.all_vcpus_matched_freq = true;
+	kvm->arch.all_vcpus_matched_tsc = true;
+	kvm->arch.cur_tsc_scaling_ratio = kvm_caps.default_tsc_scaling_ratio;
+	kvm->arch.cur_tsc_khz = kvm->arch.default_tsc_khz;
+
+	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
+
+	/*
+	 * Establish the initial TSC generation for synchronization logic.
+	 * The first vCPU will sync to this, starting its guest TSC at the
+	 * number of cycles elapsed since VM creation rather than at zero.
+	 * This ensures coherence with the kvmclock epoch (also set here)
+	 * and means the master clock snapshot taken below is immediately
+	 * valid — no need to redo it at first vCPU creation.
+	 */
+#ifdef CONFIG_X86_64
+	if (!kvm_get_time_and_clockread(&kvmclock_ns, &kvmclock_host_tsc))
+#endif
+	{
+		/*
+		 * If not simultaneous, we want the TSC to be zero slightly
+		 * *after* the kvmclock is zero.
+		 */
+		kvmclock_ns = get_kvmclock_base_ns();
+		kvmclock_host_tsc = rdtsc();
+	}
+	kvm->arch.cur_tsc_write = 0;
+	kvm->arch.cur_tsc_offset = -(s64)kvmclock_host_tsc;
+	kvm->arch.cur_tsc_nsec = kvmclock_ns;
+	kvm->arch.cur_tsc_generation = 1;
+	kvm->arch.kvmclock_offset = -kvmclock_ns;
+
+	pvclock_update_vm_gtod_copy(kvm);
+	raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
+
 #if IS_ENABLED(CONFIG_HYPERV)
 	spin_lock_init(&kvm->arch.hv_root_tdp_lock);
 	kvm->arch.hv_root_tdp = INVALID_PAGE;
-- 
2.55.0

[PATCH v7 29/36] UAPI: x86: Move pvclock-abi to UAPI for x86 platforms

[David Woodhouse]

From: Jack Allister <jalliste@amazon.com>

A subsequent commit will provide a new KVM interface for performing a
fixup/correction of the KVM clock against the reference TSC. The
KVM_[GS]ET_CLOCK_GUEST API requires a pvclock_vcpu_time_info, as such
the caller must know about this definition.

Move the definition to the UAPI folder so that it is exported to
usermode and also change the type definitions to use the standard for
UAPI exports.

Signed-off-by: Jack Allister <jalliste@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
---
 MAINTAINERS                                   |  4 +--
 arch/x86/include/{ => uapi}/asm/pvclock-abi.h | 27 ++++++++++---------
 scripts/xen-hypercalls.sh                     |  2 +-
 3 files changed, 18 insertions(+), 15 deletions(-)
 rename arch/x86/include/{ => uapi}/asm/pvclock-abi.h (82%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 4a8b0fd665ce..4d5e1088458d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14546,7 +14546,7 @@ S:	Supported
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
 F:	arch/um/include/asm/kvm_para.h
 F:	arch/x86/include/asm/kvm_para.h
-F:	arch/x86/include/asm/pvclock-abi.h
+F:	arch/x86/include/uapi/asm/pvclock-abi.h
 F:	arch/x86/include/uapi/asm/kvm_para.h
 F:	arch/x86/kernel/kvm.c
 F:	arch/x86/kernel/kvmclock.c
@@ -29435,7 +29435,7 @@ R:	Boris Ostrovsky <boris.ostrovsky@oracle.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/configs/xen.config
-F:	arch/x86/include/asm/pvclock-abi.h
+F:	arch/x86/include/uapi/asm/pvclock-abi.h
 F:	arch/x86/include/asm/xen/
 F:	arch/x86/platform/pvh/
 F:	arch/x86/xen/
diff --git a/arch/x86/include/asm/pvclock-abi.h b/arch/x86/include/uapi/asm/pvclock-abi.h
similarity index 82%
rename from arch/x86/include/asm/pvclock-abi.h
rename to arch/x86/include/uapi/asm/pvclock-abi.h
index b9fece5fc96d..6d70cf640362 100644
--- a/arch/x86/include/asm/pvclock-abi.h
+++ b/arch/x86/include/uapi/asm/pvclock-abi.h
@@ -1,6 +1,9 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 #ifndef _ASM_X86_PVCLOCK_ABI_H
 #define _ASM_X86_PVCLOCK_ABI_H
+
+#include <linux/types.h>
+
 #ifndef __ASSEMBLER__
 
 /*
@@ -24,20 +27,20 @@
  */
 
 struct pvclock_vcpu_time_info {
-	u32   version;
-	u32   pad0;
-	u64   tsc_timestamp;
-	u64   system_time;
-	u32   tsc_to_system_mul;
-	s8    tsc_shift;
-	u8    flags;
-	u8    pad[2];
+	__u32   version;
+	__u32   pad0;
+	__u64   tsc_timestamp;
+	__u64   system_time;
+	__u32   tsc_to_system_mul;
+	__s8    tsc_shift;
+	__u8    flags;
+	__u8    pad[2];
 } __attribute__((__packed__)); /* 32 bytes */
 
 struct pvclock_wall_clock {
-	u32   version;
-	u32   sec;
-	u32   nsec;
+	__u32   version;
+	__u32   sec;
+	__u32   nsec;
 } __attribute__((__packed__));
 
 #define PVCLOCK_TSC_STABLE_BIT	(1 << 0)
diff --git a/scripts/xen-hypercalls.sh b/scripts/xen-hypercalls.sh
index f18b00843df3..51a722198997 100755
--- a/scripts/xen-hypercalls.sh
+++ b/scripts/xen-hypercalls.sh
@@ -5,7 +5,7 @@ shift
 in="$@"
 
 for i in $in; do
-	eval $CPP $LINUXINCLUDE -dD -imacros "$i" -x c /dev/null
+	eval $CPP -D__KERNEL__ $LINUXINCLUDE -dD -imacros "$i" -x c /dev/null
 done | \
 awk '$1 == "#define" && $2 ~ /__HYPERVISOR_[a-z][a-z_0-9]*/ { v[$3] = $2 }
 	END {   print "/* auto-generated by scripts/xen-hypercall.sh */"
-- 
2.55.0

[PATCH v7 30/36] KVM: selftests: Use UAPI pvclock-abi.h in xen_shinfo_test

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Now that pvclock-abi.h is a UAPI header, use it in xen_shinfo_test.c
instead of locally duplicating the struct definitions.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 .../testing/selftests/kvm/x86/xen_shinfo_test.c | 17 +----------------
 1 file changed, 1 insertion(+), 16 deletions(-)

diff --git a/tools/testing/selftests/kvm/x86/xen_shinfo_test.c b/tools/testing/selftests/kvm/x86/xen_shinfo_test.c
index 5076f6a75455..2f241ca4f096 100644
--- a/tools/testing/selftests/kvm/x86/xen_shinfo_test.c
+++ b/tools/testing/selftests/kvm/x86/xen_shinfo_test.c
@@ -98,22 +98,7 @@ struct sched_poll {
 	u64 timeout;
 };
 
-struct pvclock_vcpu_time_info {
-	u32   version;
-	u32   pad0;
-	u64   tsc_timestamp;
-	u64   system_time;
-	u32   tsc_to_system_mul;
-	s8    tsc_shift;
-	u8    flags;
-	u8    pad[2];
-} __attribute__((__packed__)); /* 32 bytes */
-
-struct pvclock_wall_clock {
-	u32   version;
-	u32   sec;
-	u32   nsec;
-} __attribute__((__packed__));
+#include <asm/pvclock-abi.h>
 
 struct vcpu_runstate_info {
 	u32 state;
-- 
2.55.0

[PATCH v7 31/36] KVM: x86: Add KVM_[GS]ET_CLOCK_GUEST for accurate KVM clock migration

[David Woodhouse]

From: Jack Allister <jalliste@amazon.com>

In the common case (where kvm->arch.use_master_clock is true), the KVM
clock is defined as a simple arithmetic function of the guest TSC, based
on a reference point stored in kvm->arch.master_kernel_ns and
kvm->arch.master_cycle_now.

The existing KVM_[GS]ET_CLOCK functionality does not allow for this
relationship to be precisely saved and restored by userspace. All it can
currently do is set the KVM clock at a given UTC reference time, which
is necessarily imprecise.

So on live update, the guest TSC can remain cycle accurate at precisely
the same offset from the host TSC, but there is no way for userspace to
restore the KVM clock accurately.

Even on live migration to a new host, where the accuracy of the guest
time-keeping is fundamentally limited by the accuracy of wallclock
synchronization between the source and destination hosts, the clock jump
experienced by the guest's TSC and its KVM clock should at least be
*consistent*. Even when the guest TSC suffers a discontinuity, its KVM
clock should still remain the *same* arithmetic function of the guest
TSC, and not suffer an *additional* discontinuity.

To allow for accurate migration of the KVM clock, add per-vCPU ioctls
which save and restore the actual PV clock info in
pvclock_vcpu_time_info.

The restoration in KVM_SET_CLOCK_GUEST works by creating a new reference
point in time just as kvm_update_masterclock() does, and calculating the
corresponding guest TSC value. This guest TSC value is then passed
through the user-provided pvclock structure to generate the *intended*
KVM clock value at that point in time, and through the *actual* KVM
clock calculation. Then kvm->arch.kvmclock_offset is adjusted to
eliminate the difference.

Where kvm->arch.use_master_clock is false (because the host TSC is
unreliable, or the guest TSCs are configured strangely), the KVM clock
is *not* defined as a function of the guest TSC so KVM_GET_CLOCK_GUEST
returns an error. In this case, as documented, userspace shall use the
legacy KVM_GET_CLOCK ioctl. The loss of precision is acceptable in this
case since the clocks are imprecise in this mode anyway.

On *restoration*, if kvm->arch.use_master_clock is false, an error is
returned for similar reasons and userspace shall fall back to using
KVM_SET_CLOCK. This does mean that, as documented, userspace needs to
use *both* KVM_GET_CLOCK_GUEST and KVM_GET_CLOCK and send both results
with the migration data (unless the intent is to refuse to resume on a
host with bad TSC).

Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Jack Allister <jalliste@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Tested-by: Dongli Zhang <dongli.zhang@oracle.com>
---
 Documentation/virt/kvm/api.rst  |  37 +++++++
 arch/x86/include/uapi/asm/kvm.h |   1 +
 arch/x86/kvm/x86.c              | 171 ++++++++++++++++++++++++++++++++
 include/uapi/linux/kvm.h        |   3 +
 4 files changed, 212 insertions(+)

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index a5f9ee92f43e..b16cc5ea35bc 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -6566,6 +6566,43 @@ KVM_S390_KEYOP_SSKE
   Sets the storage key for the guest address ``guest_addr`` to the key
   specified in ``key``, returning the previous value in ``key``.
 
+4.145 KVM_GET_CLOCK_GUEST
+----------------------------
+
+:Capability: none
+:Architectures: x86_64
+:Type: vcpu ioctl
+:Parameters: struct pvclock_vcpu_time_info (out)
+:Returns: 0 on success, <0 on error
+
+Retrieves the current time information structure used for KVM/PV clocks,
+in precisely the form advertised to the guest vCPU, which gives parameters
+for a direct conversion from a guest TSC value to nanoseconds.
+
+When the KVM clock is not in "master clock" mode, for example because the
+host TSC is unreliable or the guest TSCs are oddly configured, the KVM clock
+is actually defined by the host CLOCK_MONOTONIC_RAW instead of the guest TSC.
+In this case, the KVM_GET_CLOCK_GUEST ioctl returns -EINVAL.
+
+4.146 KVM_SET_CLOCK_GUEST
+----------------------------
+
+:Capability: none
+:Architectures: x86_64
+:Type: vcpu ioctl
+:Parameters: struct pvclock_vcpu_time_info (in)
+:Returns: 0 on success, <0 on error
+
+Sets the KVM clock (for the whole VM) in terms of the vCPU TSC, using the
+pvclock structure as returned by KVM_GET_CLOCK_GUEST. This allows the precise
+arithmetic relationship between guest TSC and KVM clock to be preserved by
+userspace across migration.
+
+When the KVM clock is not in "master clock" mode, and the KVM clock is actually
+defined by the host CLOCK_MONOTONIC_RAW, this ioctl returns -EINVAL. Userspace
+may choose to set the clock using the less precise KVM_SET_CLOCK ioctl, or may
+choose to fail, denying migration to a host whose TSC is misbehaving.
+
 .. _kvm_run:
 
 5. The kvm_run structure
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index 1585ec804066..9e3cdc3adb65 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/ioctl.h>
 #include <linux/stddef.h>
+#include <asm/pvclock-abi.h>
 
 #define KVM_PIO_PAGE_OFFSET 1
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 2
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5c78dd1e4c69..0680332d7d45 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3435,6 +3435,169 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 	}
 }
 
+#ifdef CONFIG_X86_64
+static int kvm_vcpu_ioctl_get_clock_guest(struct kvm_vcpu *v, void __user *argp)
+{
+	struct pvclock_vcpu_time_info hv_clock = {};
+	struct kvm_vcpu_arch *vcpu = &v->arch;
+	struct kvm_arch *ka = &v->kvm->arch;
+	unsigned int seq;
+
+	/*
+	 * If KVM_REQ_CLOCK_UPDATE is already pending, or if the pvclock
+	 * has never been generated at all, call kvm_guest_time_update().
+	 */
+	if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, v) || !vcpu->hw_tsc_hz) {
+		int idx = srcu_read_lock(&v->kvm->srcu);
+		int ret = kvm_guest_time_update(v);
+
+		srcu_read_unlock(&v->kvm->srcu, idx);
+		if (ret)
+			return -EINVAL;
+	}
+
+	/*
+	 * Reconstruct the pvclock from the master clock state, matching
+	 * exactly what kvm_guest_time_update() writes to the guest.
+	 */
+	do {
+		seq = read_seqcount_begin(&ka->pvclock_sc);
+
+		if (!ka->use_master_clock)
+			return -EINVAL;
+
+		hv_clock.tsc_timestamp = kvm_read_l1_tsc(v, ka->master_cycle_now);
+		hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
+	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
+
+	hv_clock.tsc_shift = vcpu->pvclock_tsc_shift;
+	hv_clock.tsc_to_system_mul = vcpu->pvclock_tsc_mul;
+	hv_clock.flags = ka->all_vcpus_matched_tsc ? PVCLOCK_TSC_STABLE_BIT : 0;
+
+	if (copy_to_user(argp, &hv_clock, sizeof(hv_clock)))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Reverse the calculation in the hv_clock definition.
+ *
+ * time_ns = ( (cycles << shift) * mul ) >> 32;
+ * (although shift can be negative, so that's bad C)
+ *
+ * So for a single second,
+ * NSEC_PER_SEC = ( ( FREQ_HZ << shift) * mul ) >> 32
+ * NSEC_PER_SEC << 32 = ( FREQ_HZ << shift ) * mul
+ * ( NSEC_PER_SEC << 32 ) / mul = FREQ_HZ << shift
+ * ( NSEC_PER_SEC << 32 ) / mul ) >> shift = FREQ_HZ
+ */
+static u64 hvclock_to_hz(u32 mul, s8 shift)
+{
+	u64 tm = NSEC_PER_SEC << 32;
+
+	/* Maximise precision. Shift right until the top bit is set */
+	tm <<= 2;
+	shift += 2;
+
+	/* While 'mul' is even, increase the shift *after* the division */
+	while (!(mul & 1)) {
+		shift++;
+		mul >>= 1;
+	}
+
+	tm /= mul;
+
+	if (shift >= 64)
+		return 0;
+	if (shift > 0)
+		return tm >> shift;
+	if (shift <= -64)
+		return 0;
+	return tm << -shift;
+}
+
+static int kvm_vcpu_ioctl_set_clock_guest(struct kvm_vcpu *v, void __user *argp)
+{
+	struct pvclock_vcpu_time_info user_hv_clock;
+	struct kvm *kvm = v->kvm;
+	struct kvm_arch *ka = &kvm->arch;
+	u64 curr_tsc_hz, user_tsc_hz;
+	u64 user_clk_ns;
+	u64 guest_tsc;
+	int rc = 0;
+
+	if (copy_from_user(&user_hv_clock, argp, sizeof(user_hv_clock)))
+		return -EFAULT;
+
+	if (user_hv_clock.pad0 || user_hv_clock.pad[0] || user_hv_clock.pad[1])
+		return -EINVAL;
+
+	if (!user_hv_clock.tsc_to_system_mul)
+		return -EINVAL;
+
+	if (user_hv_clock.tsc_shift < -31 || user_hv_clock.tsc_shift > 31)
+		return -EINVAL;
+
+	user_tsc_hz = hvclock_to_hz(user_hv_clock.tsc_to_system_mul,
+				    user_hv_clock.tsc_shift);
+
+	kvm_hv_request_tsc_page_update(kvm);
+
+	/*
+	 * kvm_start_pvclock_update() takes tsc_write_lock and opens
+	 * the pvclock seqcount; kvm_end_pvclock_update() closes both.
+	 * All clock state modifications between them are atomic with
+	 * respect to readers in kvm_guest_time_update().
+	 */
+	kvm_start_pvclock_update(kvm);
+	pvclock_update_vm_gtod_copy(kvm);
+
+	if (!ka->use_master_clock) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	curr_tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
+	if (unlikely(curr_tsc_hz == 0)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	if (kvm_caps.has_tsc_control)
+		curr_tsc_hz = kvm_scale_tsc(curr_tsc_hz,
+					    v->arch.l1_tsc_scaling_ratio);
+
+	/*
+	 * Allow for a discrepancy of 1 kHz either way between the TSC
+	 * frequency used to generate the user's pvclock and the current
+	 * host's measured frequency, since they may not precisely match.
+	 */
+	if (user_tsc_hz < curr_tsc_hz - 1000 ||
+	    user_tsc_hz > curr_tsc_hz + 1000) {
+		rc = -ERANGE;
+		goto out;
+	}
+
+	/*
+	 * Calculate the guest TSC at the new reference point, and the
+	 * corresponding KVM clock value according to user_hv_clock.
+	 * Adjust kvmclock_offset so both definitions agree.
+	 */
+	guest_tsc = kvm_read_l1_tsc(v, ka->master_cycle_now);
+	if (guest_tsc < user_hv_clock.tsc_timestamp) {
+		rc = -EINVAL;
+		goto out;
+	}
+	user_clk_ns = __pvclock_read_cycles(&user_hv_clock, guest_tsc);
+	ka->kvmclock_offset = user_clk_ns - ka->master_kernel_ns;
+
+out:
+	kvm_end_pvclock_update(kvm);
+	return rc;
+}
+#endif
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -3828,6 +3991,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		break;
 	}
+#ifdef CONFIG_X86_64
+	case KVM_SET_CLOCK_GUEST:
+		r = kvm_vcpu_ioctl_set_clock_guest(vcpu, argp);
+		break;
+	case KVM_GET_CLOCK_GUEST:
+		r = kvm_vcpu_ioctl_get_clock_guest(vcpu, argp);
+		break;
+#endif
 #ifdef CONFIG_KVM_HYPERV
 	case KVM_GET_SUPPORTED_HV_CPUID:
 		r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp);
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 419011097fa8..d20c9586907b 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -1670,4 +1670,7 @@ struct kvm_pre_fault_memory {
 	__u64 padding[5];
 };
 
+#define KVM_SET_CLOCK_GUEST	_IOW(KVMIO, 0xd6, struct pvclock_vcpu_time_info)
+#define KVM_GET_CLOCK_GUEST	_IOR(KVMIO, 0xd7, struct pvclock_vcpu_time_info)
+
 #endif /* __LINUX_KVM_H */
-- 
2.55.0

[PATCH v7 32/36] KVM: x86: Add KVM_VCPU_TSC_SCALE and fix the documentation on TSC migration

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

The documentation on TSC migration using KVM_VCPU_TSC_OFFSET is woefully
inadequate. It ignores TSC scaling, and ignores the fact that the host
TSC may differ from one host to the next (and in fact because of the way
the kernel calibrates it, it generally differs from one boot to the next
even on the same hardware).

Add KVM_VCPU_TSC_SCALE to extract the actual scale ratio and frac_bits,
and attempt to document the process that userspace needs to follow to
preserve the TSC across migration. Add a self test to function as an
exemplar.

Only enumerate KVM_VCPU_TSC_SCALE when kvm_caps.has_tsc_control is true,
since the scaling ratio is only meaningful when hardware TSC scaling is
supported.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
---
 Documentation/virt/kvm/devices/vcpu.rst       | 120 ++++--
 arch/x86/include/uapi/asm/kvm.h               |   6 +
 arch/x86/kvm/x86.c                            |  21 +
 tools/testing/selftests/kvm/Makefile.kvm      |   1 +
 .../kvm/x86/pvclock_migration_test.c          | 383 ++++++++++++++++++
 5 files changed, 501 insertions(+), 30 deletions(-)
 create mode 100644 tools/testing/selftests/kvm/x86/pvclock_migration_test.c

diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst
index 66e714f2fcfa..2b8ab8995079 100644
--- a/Documentation/virt/kvm/devices/vcpu.rst
+++ b/Documentation/virt/kvm/devices/vcpu.rst
@@ -232,6 +232,7 @@ including the layout of the stolen time structure.
 :Architectures: x86
 
 4.1 ATTRIBUTE: KVM_VCPU_TSC_OFFSET
+----------------------------------
 
 :Parameters: 64-bit unsigned TSC offset
 
@@ -246,7 +247,10 @@ Returns:
 Specifies the guest's TSC offset relative to the host's TSC. The guest's
 TSC is then derived by the following equation:
 
-  guest_tsc = host_tsc + KVM_VCPU_TSC_OFFSET
+  guest_tsc = ((host_tsc * tsc_ratio) >> tsc_frac_bits) + KVM_VCPU_TSC_OFFSET
+
+The values of tsc_ratio and tsc_frac_bits can be obtained using
+the KVM_VCPU_TSC_SCALE attribute.
 
 This attribute is useful to adjust the guest's TSC on live migration,
 so that the TSC counts the time during which the VM was paused. The
@@ -254,44 +258,100 @@ following describes a possible algorithm to use for this purpose.
 
 From the source VMM process:
 
-1. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (tsc_src),
+1. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (host_tsc_src),
    kvmclock nanoseconds (guest_src), and host CLOCK_REALTIME nanoseconds
-   (host_src).
+   (time_src) at a given moment (Tsrc).
+
+2. For each vCPU[i]:
+
+   a. Read the KVM_VCPU_TSC_OFFSET attribute to record the guest TSC offset
+      (ofs_src[i]).
 
-2. Read the KVM_VCPU_TSC_OFFSET attribute for every vCPU to record the
-   guest TSC offset (ofs_src[i]).
+   b. Read the KVM_VCPU_TSC_SCALE attribute to record the guest TSC scaling
+      ratio (ratio_src[i], frac_bits_src[i]).
 
-3. Invoke the KVM_GET_TSC_KHZ ioctl to record the frequency of the
-   guest's TSC (freq).
+   c. Use host_tsc_src and the scaling/offset factors to calculate this
+      vCPU's TSC at time Tsrc:
+
+      tsc_src[i] = ((host_tsc_src * ratio_src[i]) >> frac_bits_src[i]) + ofs_src[i]
+
+3. Invoke the KVM_GET_CLOCK_GUEST ioctl on the boot vCPU to return the KVM
+   clock as a function of the guest TSC (pvti_src). (This ioctl may not
+   succeed if the host and guest TSCs are not consistent and well-behaved.)
 
 From the destination VMM process:
 
-4. Invoke the KVM_SET_CLOCK ioctl, providing the source nanoseconds from
-   kvmclock (guest_src) and CLOCK_REALTIME (host_src) in their respective
-   fields.  Ensure that the KVM_CLOCK_REALTIME flag is set in the provided
-   structure.
+4. Before creating the vCPUs, invoke the KVM_SET_TSC_KHZ ioctl on the VM, to
+   set the scaled frequency of the guest's TSC (freq).
+
+5. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (host_tsc_dst) and
+   host CLOCK_REALTIME nanoseconds (time_dst) at a given moment (Tdst).
+
+6. Calculate the number of nanoseconds elapsed between Tsrc and Tdst:
+
+   ΔT = time_dst - time_src
+
+7. As each vCPU[i] is created:
+
+   a. Read the KVM_VCPU_TSC_SCALE attribute to record the guest TSC scaling
+      ratio (ratio_dst[i], frac_bits_dst[i]).
+
+   b. Calculate the intended guest TSC value at time Tdst:
+
+      tsc_dst[i] = tsc_src[i] + (ΔT * freq[i])
 
-   KVM will advance the VM's kvmclock to account for elapsed time since
-   recording the clock values.  Note that this will cause problems in
-   the guest (e.g., timeouts) unless CLOCK_REALTIME is synchronized
-   between the source and destination, and a reasonably short time passes
-   between the source pausing the VMs and the destination executing
-   steps 4-7.
+   c. Use host_tsc_dst and the scaling factors to calculate this vCPU's
+      raw scaled TSC at time Tdst without offsetting:
+
+      raw_dst[i] = ((host_tsc_dst * ratio_dst[i]) >> frac_bits_dst[i])
+
+   d. Calculate ofs_dst[i] = tsc_dst[i] - raw_dst[i] and set the resulting
+      offset using the KVM_VCPU_TSC_OFFSET attribute.
+
+8. If pvti_src was provided, invoke the KVM_SET_CLOCK_GUEST ioctl on the boot
+   vCPU to restore the KVM clock as a precise function of the guest TSC.
+
+9. If KVM_SET_CLOCK_GUEST was not available or failed (e.g. because the
+   master clock is not active), fall back to the KVM_SET_CLOCK ioctl,
+   providing the source nanoseconds from kvmclock (guest_src) and
+   CLOCK_REALTIME (time_src) in their respective fields. Ensure that the
+   KVM_CLOCK_REALTIME flag is set in the provided structure.
+
+   KVM will restore the VM's kvmclock, accounting for elapsed time since
+   the clock values were recorded. Note that this will cause problems in
+   the guest (e.g., timeouts) unless CLOCK_REALTIME is synchronized between
+   the source and destination, and a reasonably short time passes between
+   the source pausing the VMs and the destination resuming them.
+   Due to the KVM_[SG]ET_CLOCK API using CLOCK_REALTIME instead of
+   CLOCK_TAI, leap seconds during the migration may also introduce errors.
+
+4.2 ATTRIBUTE: KVM_VCPU_TSC_SCALE
+---------------------------------
+
+:Parameters: struct kvm_vcpu_tsc_scale
+
+Returns:
+
+	 ======= ======================================
+	 -EFAULT Error reading the provided parameter
+		 address.
+	 -ENXIO  Attribute not supported (no TSC scaling)
+	 -EINVAL Invalid request to write the attribute
+	 ======= ======================================
 
-5. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (tsc_dest) and
-   kvmclock nanoseconds (guest_dest).
+This read-only attribute reports the guest's TSC scaling factor, in the form
+of a fixed-point number represented by the following structure::
 
-6. Adjust the guest TSC offsets for every vCPU to account for (1) time
-   elapsed since recording state and (2) difference in TSCs between the
-   source and destination machine:
+  struct kvm_vcpu_tsc_scale {
+	__u64 tsc_ratio;
+	__u64 tsc_frac_bits;
+  };
 
-   ofs_dst[i] = ofs_src[i] -
-     (guest_src - guest_dest) * freq +
-     (tsc_src - tsc_dest)
+The tsc_frac_bits field indicates the location of the fixed point, such that
+host TSC values are converted to guest TSC using the formula:
 
-   ("ofs[i] + tsc - guest * freq" is the guest TSC value corresponding to
-   a time of 0 in kvmclock.  The above formula ensures that it is the
-   same on the destination as it was on the source).
+  guest_tsc = ((host_tsc * tsc_ratio) >> tsc_frac_bits) + offset
 
-7. Write the KVM_VCPU_TSC_OFFSET attribute for every vCPU with the
-   respective value derived in the previous step.
+Userspace can use this to precisely calculate the guest TSC from the host
+TSC at any given moment. This is needed for accurate migration of guests,
+as described in the documentation for the KVM_VCPU_TSC_OFFSET attribute.
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index 9e3cdc3adb65..f8274d8e471d 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -964,6 +964,12 @@ struct kvm_hyperv_eventfd {
 /* for KVM_{GET,SET,HAS}_DEVICE_ATTR */
 #define KVM_VCPU_TSC_CTRL 0 /* control group for the timestamp counter (TSC) */
 #define   KVM_VCPU_TSC_OFFSET 0 /* attribute for the TSC offset */
+#define   KVM_VCPU_TSC_SCALE  1 /* attribute for TSC scaling factor */
+
+struct kvm_vcpu_tsc_scale {
+	__u64 tsc_ratio;
+	__u64 tsc_frac_bits;
+};
 
 /* x86-specific KVM_EXIT_HYPERCALL flags. */
 #define KVM_EXIT_HYPERCALL_LONG_MODE	_BITULL(0)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0680332d7d45..3c899f996abb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3287,6 +3287,9 @@ static int kvm_arch_tsc_has_attr(struct kvm_vcpu *vcpu,
 	case KVM_VCPU_TSC_OFFSET:
 		r = 0;
 		break;
+	case KVM_VCPU_TSC_SCALE:
+		r = kvm_caps.has_tsc_control ? 0 : -ENXIO;
+		break;
 	default:
 		r = -ENXIO;
 	}
@@ -3307,6 +3310,21 @@ static int kvm_arch_tsc_get_attr(struct kvm_vcpu *vcpu,
 			break;
 		r = 0;
 		break;
+	case KVM_VCPU_TSC_SCALE: {
+		struct kvm_vcpu_tsc_scale scale;
+
+		r = -ENXIO;
+		if (!kvm_caps.has_tsc_control)
+			break;
+
+		scale.tsc_ratio = vcpu->arch.l1_tsc_scaling_ratio;
+		scale.tsc_frac_bits = kvm_caps.tsc_scaling_ratio_frac_bits;
+		r = -EFAULT;
+		if (copy_to_user(uaddr, &scale, sizeof(scale)))
+			break;
+		r = 0;
+		break;
+	}
 	default:
 		r = -ENXIO;
 	}
@@ -3346,6 +3364,9 @@ static int kvm_arch_tsc_set_attr(struct kvm_vcpu *vcpu,
 		r = 0;
 		break;
 	}
+	case KVM_VCPU_TSC_SCALE:
+		r = kvm_caps.has_tsc_control ? -EINVAL : -ENXIO;
+		break;
 	default:
 		r = -ENXIO;
 	}
diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
index 88c6c8046dde..28eba412a2b9 100644
--- a/tools/testing/selftests/kvm/Makefile.kvm
+++ b/tools/testing/selftests/kvm/Makefile.kvm
@@ -107,6 +107,7 @@ TEST_GEN_PROGS_x86 += x86/pmu_counters_test
 TEST_GEN_PROGS_x86 += x86/pmu_event_filter_test
 TEST_GEN_PROGS_x86 += x86/private_mem_conversions_test
 TEST_GEN_PROGS_x86 += x86/private_mem_kvm_exits_test
+TEST_GEN_PROGS_x86 += x86/pvclock_migration_test
 TEST_GEN_PROGS_x86 += x86/set_boot_cpu_id
 TEST_GEN_PROGS_x86 += x86/set_sregs_test
 TEST_GEN_PROGS_x86 += x86/smaller_maxphyaddr_emulation_test
diff --git a/tools/testing/selftests/kvm/x86/pvclock_migration_test.c b/tools/testing/selftests/kvm/x86/pvclock_migration_test.c
new file mode 100644
index 000000000000..3b675827aec3
--- /dev/null
+++ b/tools/testing/selftests/kvm/x86/pvclock_migration_test.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Test KVM clock precision across simulated live migration.
+ *
+ * Verifies that the documented TSC migration procedure (using
+ * KVM_VCPU_TSC_OFFSET, KVM_VCPU_TSC_SCALE, KVM_GET_CLOCK, and
+ * KVM_SET_CLOCK_GUEST) preserves the kvmclock's relationship to
+ * CLOCK_MONOTONIC_RAW.
+ *
+ * The test:
+ * 1. Creates a VM, runs the guest to enable kvmclock
+ * 2. Does a PTP-like ABA measurement of kvmclock vs CLOCK_MONOTONIC_RAW
+ * 3. Follows the documented migration procedure (same host, 1s pause)
+ * 4. Does the same ABA measurement on the destination VM
+ * 5. Verifies the kvmclock-vs-monotonic delta is preserved
+ */
+#include <inttypes.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+
+#include <asm/pvclock-abi.h>
+
+#define KVMCLOCK_GPA	0xc0000000ULL
+
+static void guest_code(void)
+{
+	wrmsr(MSR_KVM_SYSTEM_TIME_NEW, KVMCLOCK_GPA | 1);
+	GUEST_SYNC(0);
+	GUEST_SYNC(1);
+}
+
+static uint64_t read_kvmclock_ns(struct kvm_vm *vm)
+{
+	struct kvm_clock_data data = {};
+
+	vm_ioctl(vm, KVM_GET_CLOCK, &data);
+	return data.clock;
+}
+
+static uint64_t pvclock_read_cycles(struct pvclock_vcpu_time_info *src,
+				    uint64_t tsc)
+{
+	uint64_t delta = tsc - src->tsc_timestamp;
+	uint64_t ns;
+
+	if (src->tsc_shift >= 0)
+		delta <<= src->tsc_shift;
+	else
+		delta >>= -(int32_t)src->tsc_shift;
+
+	ns = (unsigned __int128)delta * src->tsc_to_system_mul >> 32;
+	return src->system_time + ns;
+}
+
+/*
+ * ABA measurement: read CLOCK_MONOTONIC_RAW, kvmclock, CLOCK_MONOTONIC_RAW.
+ * Repeat 3 times, keep the reading with the smallest spread.
+ */
+static void aba_reading(struct kvm_vm *vm, uint64_t *lo, uint64_t *kvm_ns,
+			uint64_t *hi)
+{
+	uint64_t best_spread = UINT64_MAX;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		struct timespec ts1, ts2;
+		uint64_t m1, m2, clk;
+
+		clock_gettime(CLOCK_MONOTONIC_RAW, &ts1);
+		clk = read_kvmclock_ns(vm);
+		clock_gettime(CLOCK_MONOTONIC_RAW, &ts2);
+
+		m1 = ts1.tv_sec * 1000000000ULL + ts1.tv_nsec;
+		m2 = ts2.tv_sec * 1000000000ULL + ts2.tv_nsec;
+
+		if (m2 - m1 < best_spread) {
+			best_spread = m2 - m1;
+			*lo = m1;
+			*kvm_ns = clk;
+			*hi = m2;
+		}
+	}
+}
+
+static struct kvm_vm *create_vm(struct kvm_vcpu **vcpu)
+{
+	struct kvm_vm *vm = vm_create_with_one_vcpu(vcpu, guest_code);
+
+	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
+				    KVMCLOCK_GPA, 1, 1, 0);
+	virt_map(vm, KVMCLOCK_GPA, KVMCLOCK_GPA, 1);
+	return vm;
+}
+
+int main(void)
+{
+	struct pvclock_vcpu_time_info pvti_src;
+	struct kvm_clock_data clock_src, clock_dst;
+	struct kvm_vcpu_tsc_scale scale_src, scale_dst;
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+	struct ucall uc;
+	uint64_t mono_before, kvm_before, kvm_after;
+	int64_t delta_before;
+	uint64_t ofs_src, tsc_src, tsc_dst, raw_dst, ofs_dst;
+	uint64_t host_tsc_src, host_tsc_dst;
+	uint64_t time_src, time_dst;
+	int64_t delta_t;
+	uint32_t freq_khz = 1500000; /* 1.5 GHz — forces TSC scaling */
+	int ret;
+
+	TEST_REQUIRE(sys_clocksource_is_based_on_tsc());
+	TEST_REQUIRE(kvm_has_cap(KVM_CAP_TSC_CONTROL));
+
+	/* === SOURCE SIDE === */
+	pr_info("=== Source VM ===\n");
+	vm = create_vm(&vcpu);
+
+	/* Set guest TSC frequency (may trigger scaling) */
+	vcpu_ioctl(vcpu, KVM_SET_TSC_KHZ, (void *)(unsigned long)freq_khz);
+
+	/* Run guest to enable kvmclock */
+	vcpu_run(vcpu);
+	TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+	TEST_ASSERT_EQ(get_ucall(vcpu, &uc), UCALL_SYNC);
+
+	/* ABA measurement: kvmclock vs CLOCK_MONOTONIC_RAW */
+	uint64_t src_mono_lo, src_mono_hi;
+	aba_reading(vm, &src_mono_lo, &kvm_before, &src_mono_hi);
+	mono_before = (src_mono_lo + src_mono_hi) / 2;
+	delta_before = (int64_t)(kvm_before - mono_before);
+	pr_info("  kvmclock - MONOTONIC_RAW = %" PRId64 " ns (±%" PRIu64 " ns)\n",
+		delta_before, (src_mono_hi - src_mono_lo) / 2);
+
+	/* Step 1: KVM_GET_CLOCK for atomic {host_tsc, realtime} */
+	memset(&clock_src, 0, sizeof(clock_src));
+	clock_src.flags = KVM_CLOCK_REALTIME;
+	vm_ioctl(vm, KVM_GET_CLOCK, &clock_src);
+	host_tsc_src = clock_src.host_tsc;
+	time_src = clock_src.realtime;
+
+	/* Step 2: Save TSC offset and scale */
+	{
+		struct kvm_device_attr attr = {
+			.group = KVM_VCPU_TSC_CTRL,
+			.attr = KVM_VCPU_TSC_OFFSET,
+			.addr = (uint64_t)(uintptr_t)&ofs_src,
+		};
+		vcpu_ioctl(vcpu, KVM_GET_DEVICE_ATTR, &attr);
+	}
+	{
+		struct kvm_device_attr attr = {
+			.group = KVM_VCPU_TSC_CTRL,
+			.attr = KVM_VCPU_TSC_SCALE,
+			.addr = (uint64_t)(uintptr_t)&scale_src,
+		};
+		memset(&scale_src, 0, sizeof(scale_src));
+		__vcpu_ioctl(vcpu, KVM_GET_DEVICE_ATTR, &attr);
+	}
+
+	/* Compute guest TSC at Tsrc */
+	if (scale_src.tsc_frac_bits)
+		tsc_src = ((unsigned __int128)host_tsc_src * scale_src.tsc_ratio
+			   >> scale_src.tsc_frac_bits) + ofs_src;
+	else
+		tsc_src = host_tsc_src + ofs_src;
+
+	/* Step 3: KVM_GET_CLOCK_GUEST */
+	ret = __vcpu_ioctl(vcpu, KVM_GET_CLOCK_GUEST, &pvti_src);
+	TEST_ASSERT(!ret, "KVM_GET_CLOCK_GUEST failed");
+
+	pr_info("  TSC freq=%u kHz, offset=%" PRId64 "\n", freq_khz, (int64_t)ofs_src);
+
+	kvm_vm_release(vm);
+
+	/* === PAUSE (simulate migration) === */
+	pr_info("=== Pausing 1 second ===\n");
+	sleep(1);
+
+	/* === DESTINATION SIDE === */
+	pr_info("=== Destination VM ===\n");
+	vm = create_vm(&vcpu);
+
+	/* Step 4: KVM_SET_TSC_KHZ */
+	vcpu_ioctl(vcpu, KVM_SET_TSC_KHZ, (void *)(unsigned long)freq_khz);
+
+	/* Step 5: KVM_GET_CLOCK for atomic {host_tsc, realtime} pair.
+	 * Master clock is active from vCPU creation.
+	 */
+	memset(&clock_dst, 0, sizeof(clock_dst));
+	vm_ioctl(vm, KVM_GET_CLOCK, &clock_dst);
+	host_tsc_dst = clock_dst.host_tsc;
+	time_dst = clock_dst.realtime;
+
+	/* Step 6: ΔT */
+	delta_t = (int64_t)(time_dst - time_src);
+
+	/* Step 7: Compute destination offset */
+	{
+		struct kvm_device_attr attr = {
+			.group = KVM_VCPU_TSC_CTRL,
+			.attr = KVM_VCPU_TSC_SCALE,
+			.addr = (uint64_t)(uintptr_t)&scale_dst,
+		};
+		memset(&scale_dst, 0, sizeof(scale_dst));
+		__vcpu_ioctl(vcpu, KVM_GET_DEVICE_ATTR, &attr);
+	}
+
+	tsc_dst = tsc_src + (uint64_t)((int64_t)freq_khz * delta_t / 1000000LL);
+
+	if (scale_dst.tsc_frac_bits)
+		raw_dst = (unsigned __int128)host_tsc_dst * scale_dst.tsc_ratio
+			  >> scale_dst.tsc_frac_bits;
+	else
+		raw_dst = host_tsc_dst;
+
+	ofs_dst = tsc_dst - raw_dst;
+
+	/*
+	 * The TSC offset delta introduced by using CLOCK_REALTIME to
+	 * estimate elapsed time. On same host, the correct offset is
+	 * ofs_src; the difference is the CLOCK_REALTIME-vs-TSC error.
+	 */
+	int64_t tsc_ofs_delta = (int64_t)(ofs_dst - ofs_src);
+	int64_t tsc_ofs_delta_ns = tsc_ofs_delta * 1000000LL / freq_khz;
+	pr_info("  Destination TSC offset=%" PRId64
+		", imprecision from CLOCK_REALTIME: %" PRId64 " cycles = %"
+		PRId64 " ns\n", (int64_t)ofs_dst, tsc_ofs_delta, tsc_ofs_delta_ns);
+
+	/* Set TSC offset */
+	{
+		struct kvm_device_attr attr = {
+			.group = KVM_VCPU_TSC_CTRL,
+			.attr = KVM_VCPU_TSC_OFFSET,
+			.addr = (uint64_t)(uintptr_t)&ofs_dst,
+		};
+		vcpu_ioctl(vcpu, KVM_SET_DEVICE_ATTR, &attr);
+	}
+
+	/* Step 8: KVM_SET_CLOCK_GUEST */
+	ret = __vcpu_ioctl(vcpu, KVM_SET_CLOCK_GUEST, &pvti_src);
+	TEST_ASSERT(!ret, "KVM_SET_CLOCK_GUEST failed: errno %d", errno);
+
+	/* Run guest to update pvclock page on destination */
+	vcpu_run(vcpu);
+	TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+	TEST_ASSERT_EQ(get_ucall(vcpu, &uc), UCALL_SYNC);
+
+	/* ABA measurement on destination */
+	uint64_t mono_lo, mono_hi;
+	aba_reading(vm, &mono_lo, &kvm_after, &mono_hi);
+
+	/*
+	 * The kvmclock is tied to the guest TSC via SET_CLOCK_GUEST.
+	 * The guest TSC is offset from the correct value by tsc_ofs_delta_ns
+	 * (due to CLOCK_REALTIME imprecision). So the kvmclock should be
+	 * offset from CLOCK_MONOTONIC_RAW by exactly:
+	 *   (original delta) + tsc_ofs_delta_ns
+	 *
+	 * The "original delta" has uncertainty from the source ABA spread,
+	 * and the measurement has uncertainty from the destination ABA spread.
+	 * Verify the expected value falls within the combined bounds.
+	 */
+	int64_t delta_before_lo = (int64_t)(kvm_before - src_mono_hi);
+	int64_t delta_before_hi = (int64_t)(kvm_before - src_mono_lo);
+	int64_t expected_lo = delta_before_lo + tsc_ofs_delta_ns;
+	int64_t expected_hi = delta_before_hi + tsc_ofs_delta_ns;
+	int64_t actual_lo = (int64_t)(kvm_after - mono_hi);
+	int64_t actual_hi = (int64_t)(kvm_after - mono_lo);
+
+	/* Show the shift relative to the source measurement */
+	int64_t expected_mid = tsc_ofs_delta_ns;
+	int64_t expected_err = (int64_t)(src_mono_hi - src_mono_lo) / 2;
+	int64_t actual_mid = ((actual_lo + actual_hi) / 2) - delta_before;
+	int64_t actual_err = (int64_t)(mono_hi - mono_lo) / 2;
+	pr_info("  kvmclock-mono shift: expected %" PRId64 " ns (±%" PRId64
+		"), measured %" PRId64 " ns (±%" PRId64 ")\n",
+		expected_mid, expected_err, actual_mid, actual_err);
+
+	/* The ranges must overlap */
+	TEST_ASSERT(expected_hi >= actual_lo && expected_lo <= actual_hi,
+		    "Ranges don't overlap: expected [%" PRId64 ", %" PRId64
+		    "] measured [%" PRId64 ", %" PRId64 "]",
+		    expected_lo, expected_hi, actual_lo, actual_hi);
+
+	/*
+	 * Direct pvclock verification: read the destination pvclock page
+	 * and verify that computing kvmclock from pvti_src and pvti_dst
+	 * at the same guest TSC gives the same result.
+	 *
+	 * Get an atomic {host_tsc, kvmclock} pair, scale host_tsc to
+	 * guest TSC using KVM_VCPU_TSC_SCALE, then compute kvmclock
+	 * from both pvclock structs.
+	 */
+	struct kvm_clock_data clock_now = {};
+	vm_ioctl(vm, KVM_GET_CLOCK, &clock_now);
+
+	struct pvclock_vcpu_time_info *pvti_dst = addr_gpa2hva(vm, KVMCLOCK_GPA);
+	uint64_t host_tsc_now = clock_now.host_tsc;
+	uint64_t guest_tsc_now;
+
+	if (scale_dst.tsc_frac_bits)
+		guest_tsc_now = ((unsigned __int128)host_tsc_now *
+				 scale_dst.tsc_ratio >> scale_dst.tsc_frac_bits)
+				+ ofs_dst;
+	else
+		guest_tsc_now = host_tsc_now + ofs_dst;
+
+	uint64_t clk_from_src = pvclock_read_cycles(&pvti_src, guest_tsc_now);
+	uint64_t clk_from_dst = pvclock_read_cycles(pvti_dst, guest_tsc_now);
+	int64_t pvclock_delta = (int64_t)(clk_from_src - clk_from_dst);
+
+	pr_info("  Pvclock direct: src=%" PRIu64 " dst=%" PRIu64
+		" delta=%" PRId64 " ns\n", clk_from_src, clk_from_dst, pvclock_delta);
+	pr_info("  KVM_GET_CLOCK:  %" PRIu64 " ns\n", (uint64_t)clock_now.clock);
+
+	TEST_ASSERT(pvclock_delta >= -2 && pvclock_delta <= 2,
+		    "pvclock src vs dst disagree by %" PRId64 " ns", pvclock_delta);
+
+	/*
+	 * Tight ABA: compare pvclock_read() directly (no ioctl) against
+	 * CLOCK_MONOTONIC_RAW. The spread should be much smaller since
+	 * there's no syscall between the two clock_gettime calls — just
+	 * rdtsc + userspace mul/shift.
+	 */
+	uint64_t tight_mono_lo = 0, tight_mono_hi = 0, tight_kvm = 0;
+	uint64_t tight_best_spread = UINT64_MAX;
+	for (int i = 0; i < 3; i++) {
+		struct timespec ts1, ts2;
+		uint64_t m1, m2, tsc, clk;
+
+		clock_gettime(CLOCK_MONOTONIC_RAW, &ts1);
+		tsc = rdtsc();
+		clock_gettime(CLOCK_MONOTONIC_RAW, &ts2);
+
+		m1 = ts1.tv_sec * 1000000000ULL + ts1.tv_nsec;
+		m2 = ts2.tv_sec * 1000000000ULL + ts2.tv_nsec;
+
+		/* Scale host TSC to guest TSC */
+		if (scale_dst.tsc_frac_bits)
+			tsc = ((unsigned __int128)tsc * scale_dst.tsc_ratio
+			       >> scale_dst.tsc_frac_bits) + ofs_dst;
+		else
+			tsc += ofs_dst;
+
+		clk = pvclock_read_cycles(pvti_dst, tsc);
+
+		if (m2 - m1 < tight_best_spread) {
+			tight_best_spread = m2 - m1;
+			tight_mono_lo = m1;
+			tight_mono_hi = m2;
+			tight_kvm = clk;
+		}
+	}
+	pr_info("  Tight ABA spread: %" PRIu64 " ns (best of 3)\n", tight_best_spread);
+
+	int64_t tight_expected_lo = delta_before_lo + tsc_ofs_delta_ns;
+	int64_t tight_expected_hi = delta_before_hi + tsc_ofs_delta_ns;
+	int64_t tight_actual_lo = (int64_t)(tight_kvm - tight_mono_hi);
+	int64_t tight_actual_hi = (int64_t)(tight_kvm - tight_mono_lo);
+	int64_t tight_actual_mid = ((tight_actual_lo + tight_actual_hi) / 2) - delta_before;
+	int64_t tight_actual_err = (int64_t)(tight_mono_hi - tight_mono_lo) / 2;
+
+	pr_info("  Tight kvmclock-mono shift: expected %" PRId64
+		" ns (±%" PRId64 "), measured %" PRId64 " ns (±%" PRId64 ")\n",
+		expected_mid, expected_err, tight_actual_mid, tight_actual_err);
+
+	TEST_ASSERT(tight_expected_hi >= tight_actual_lo &&
+		    tight_expected_lo <= tight_actual_hi,
+		    "Tight ABA ranges don't overlap");
+
+	kvm_vm_release(vm);
+	pr_info("PASS: kvmclock offset matches TSC delta from CLOCK_REALTIME"
+		" (%" PRId64 " ns) within ABA bounds\n", tsc_ofs_delta_ns);
+	return 0;
+}
-- 
2.55.0

[PATCH v7 33/36] KVM: selftests: Add KVM/PV clock selftest to prove timer correction

[David Woodhouse]

From: Jack Allister <jalliste@amazon.com>

A VM's KVM/PV clock has an inherent relationship to its TSC. When either
the host system live-updates or the VM is live-migrated this pairing of
the two clock sources should stay the same. In reality this is not the
case without some correction taking place.

The KVM_GET_CLOCK_GUEST/KVM_SET_CLOCK_GUEST ioctls can be used to
perform a correction on the PVTI (PV time information) structure held by
KVM to effectively fix up the kvmclock_offset prior to the guest VM
resuming in either a live-update/migration scenario.

This test proves that without the necessary fixup there is a perceived
change in the guest TSC and KVM/PV clock relationship before and after a
simulated LU/LM takes place, and that the correction eliminates it.

The test:
  1. Snapshots the PVTI at boot (PVTI0).
  2. Induces a change in PVTI data (KVM_REQ_MASTERCLOCK_UPDATE).
  3. Snapshots the PVTI after the change (PVTI1).
  4. Requests correction via KVM_SET_CLOCK_GUEST using PVTI0.
  5. Snapshots the PVTI after correction (PVTI2).

Then samples the TSC at a single point in time and calculates the KVM
clock using each PVTI snapshot. The corrected clock should match the
boot clock to within ±1ns.

The test enumerates multiple TSC frequencies from 1GHz to 5GHz at 500MHz
steps, crossing the 32-bit boundary, to exercise the scaling path at
various ratios. The sleep duration between snapshots is configurable via
the -s/--sleep command line option.

Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Jack Allister <jalliste@amazon.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
---
 tools/testing/selftests/kvm/Makefile.kvm      |   1 +
 .../testing/selftests/kvm/x86/pvclock_test.c  | 443 ++++++++++++++++++
 2 files changed, 444 insertions(+)
 create mode 100644 tools/testing/selftests/kvm/x86/pvclock_test.c

diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
index 28eba412a2b9..95539deea266 100644
--- a/tools/testing/selftests/kvm/Makefile.kvm
+++ b/tools/testing/selftests/kvm/Makefile.kvm
@@ -107,6 +107,7 @@ TEST_GEN_PROGS_x86 += x86/pmu_counters_test
 TEST_GEN_PROGS_x86 += x86/pmu_event_filter_test
 TEST_GEN_PROGS_x86 += x86/private_mem_conversions_test
 TEST_GEN_PROGS_x86 += x86/private_mem_kvm_exits_test
+TEST_GEN_PROGS_x86 += x86/pvclock_test
 TEST_GEN_PROGS_x86 += x86/pvclock_migration_test
 TEST_GEN_PROGS_x86 += x86/set_boot_cpu_id
 TEST_GEN_PROGS_x86 += x86/set_sregs_test
diff --git a/tools/testing/selftests/kvm/x86/pvclock_test.c b/tools/testing/selftests/kvm/x86/pvclock_test.c
new file mode 100644
index 000000000000..f2b917ed5dea
--- /dev/null
+++ b/tools/testing/selftests/kvm/x86/pvclock_test.c
@@ -0,0 +1,443 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © Amazon.com, Inc. or its affiliates.
+ *
+ * Tests for pvclock API
+ * KVM_SET_CLOCK_GUEST/KVM_GET_CLOCK_GUEST
+ */
+#include <getopt.h>
+#include <stdint.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+
+#include <asm/pvclock-abi.h>
+
+/*
+ * Reproduce the pvclock calculation the guest uses to convert TSC to
+ * nanoseconds. This must match the kernel's __pvclock_read_cycles().
+ */
+static inline uint64_t pvclock_scale_delta(uint64_t delta, uint32_t mul,
+					   int8_t shift)
+{
+	if (shift < 0)
+		delta >>= -shift;
+	else
+		delta <<= shift;
+	return ((__uint128_t)delta * mul) >> 32;
+}
+
+static inline uint64_t pvclock_read_cycles(struct pvclock_vcpu_time_info *src,
+					   uint64_t tsc)
+{
+	uint64_t delta = tsc - src->tsc_timestamp;
+
+	return src->system_time + pvclock_scale_delta(delta,
+						      src->tsc_to_system_mul,
+						      src->tsc_shift);
+}
+
+static inline void pvti_snapshot(struct pvclock_vcpu_time_info *dst,
+				 volatile struct pvclock_vcpu_time_info *src)
+{
+	uint32_t version;
+
+	do {
+		version = src->version;
+		__asm__ __volatile__("" ::: "memory");
+		*dst = *src;
+		__asm__ __volatile__("" ::: "memory");
+	} while ((src->version & 1) || src->version != version);
+}
+
+enum {
+	STAGE_FIRST_BOOT,
+	STAGE_UNCORRECTED,
+	STAGE_CORRECTED
+};
+
+#define KVMCLOCK_GPA	0xc0000000ull
+#define KVMCLOCK_SIZE	sizeof(struct pvclock_vcpu_time_info)
+
+static void trigger_pvti_update(void)
+{
+	/*
+	 * Toggle between KVM's old and new system time methods to coerce KVM
+	 * into updating the fields in the PV time info struct.
+	 */
+	wrmsr(MSR_KVM_SYSTEM_TIME, KVMCLOCK_GPA | KVM_MSR_ENABLED);
+	wrmsr(MSR_KVM_SYSTEM_TIME_NEW, KVMCLOCK_GPA | KVM_MSR_ENABLED);
+}
+
+static void guest_code(void)
+{
+	struct pvclock_vcpu_time_info *pvti =
+		(void *)(unsigned long)KVMCLOCK_GPA;
+	struct pvclock_vcpu_time_info pvti_boot;
+	struct pvclock_vcpu_time_info pvti_uncorrected;
+	struct pvclock_vcpu_time_info pvti_corrected;
+	uint64_t tsc_guest;
+	uint64_t clk_boot, clk_uncorrected, clk_corrected;
+	int64_t delta_corrected;
+
+	/* Set up kvmclock and snapshot the initial pvclock parameters. */
+	wrmsr(MSR_KVM_SYSTEM_TIME_NEW, KVMCLOCK_GPA | KVM_MSR_ENABLED);
+	pvti_snapshot(&pvti_boot, pvti);
+	GUEST_SYNC(STAGE_FIRST_BOOT);
+
+	/*
+	 * Trigger an update of the PVTI. Calculating the KVM clock using this
+	 * updated structure will show a delta from the original.
+	 */
+	trigger_pvti_update();
+	pvti_snapshot(&pvti_uncorrected, pvti);
+	GUEST_SYNC(STAGE_UNCORRECTED);
+
+	/*
+	 * Snapshot the corrected time (the host does KVM_SET_CLOCK_GUEST when
+	 * handling STAGE_UNCORRECTED).
+	 */
+	pvti_snapshot(&pvti_corrected, pvti);
+
+	/*
+	 * Sample the TSC at a single point in time, then calculate the
+	 * effective KVM clock using the PVTI from each stage. Verify that the
+	 * corrected clock matches the boot clock to within ±2ns.
+	 */
+	tsc_guest = rdtsc();
+
+	clk_boot = pvclock_read_cycles(&pvti_boot, tsc_guest);
+	clk_uncorrected = pvclock_read_cycles(&pvti_uncorrected, tsc_guest);
+	clk_corrected = pvclock_read_cycles(&pvti_corrected, tsc_guest);
+
+	delta_corrected = clk_boot - clk_corrected;
+
+	__GUEST_ASSERT(delta_corrected >= -2 && delta_corrected <= 2,
+		       "corrected delta %ld out of range (boot=%lu uncorrected=%lu corrected=%lu)",
+		       delta_corrected, clk_boot, clk_uncorrected, clk_corrected);
+
+	GUEST_SYNC(STAGE_CORRECTED);
+}
+
+static void run_test(struct kvm_vm *vm, struct kvm_vcpu *vcpu,
+		     unsigned int sleep_sec)
+{
+	struct pvclock_vcpu_time_info pvti_before;
+	struct ucall uc;
+
+	for (;;) {
+		vcpu_run(vcpu);
+		TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+
+		switch (get_ucall(vcpu, &uc)) {
+		case UCALL_ABORT:
+			REPORT_GUEST_ASSERT(uc);
+			break;
+		case UCALL_SYNC:
+			break;
+		default:
+			TEST_FAIL("Unexpected ucall");
+		}
+
+		switch (uc.args[1]) {
+		case STAGE_FIRST_BOOT:
+			/* Save the pvclock parameters before the update. */
+			vcpu_ioctl(vcpu, KVM_GET_CLOCK_GUEST, &pvti_before);
+
+			/* Sleep to let the clocks diverge. */
+			sleep(sleep_sec);
+			break;
+
+		case STAGE_UNCORRECTED:
+			/* Restore the original pvclock parameters. */
+			vcpu_ioctl(vcpu, KVM_SET_CLOCK_GUEST, &pvti_before);
+			break;
+
+		case STAGE_CORRECTED:
+			/* Guest verified the delta in-guest. */
+			return;
+
+		default:
+			TEST_FAIL("Unknown stage %lu", uc.args[1]);
+		}
+	}
+}
+
+static void configure_pvclock(struct kvm_vm *vm)
+{
+	unsigned int nr_pages;
+
+	nr_pages = vm_calc_num_guest_pages(VM_MODE_DEFAULT, getpagesize());
+	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
+				    KVMCLOCK_GPA, 1, nr_pages, 0);
+	virt_map(vm, KVMCLOCK_GPA, KVMCLOCK_GPA, nr_pages);
+}
+
+static void run_at_frequency(uint64_t tsc_khz, unsigned int sleep_sec)
+{
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+
+	pr_info("Testing at TSC frequency %lu kHz\n", tsc_khz);
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
+	configure_pvclock(vm);
+	vcpu_ioctl(vcpu, KVM_SET_TSC_KHZ, (void *)tsc_khz);
+	run_test(vm, vcpu, sleep_sec);
+	kvm_vm_free(vm);
+}
+
+static void test_tsc_stable_bit(void);
+static void test_clock_guest_with_offsets(void);
+
+static void usage(const char *name)
+{
+	printf("Usage: %s [options]\n"
+	       "  -s, --sleep SEC     sleep duration between snapshots (default: 2)\n"
+	       "  -h, --help          show this help\n", name);
+}
+
+int main(int argc, char *argv[])
+{
+	static const struct option long_opts[] = {
+		{ "sleep", required_argument, NULL, 's' },
+		{ "help",  no_argument,       NULL, 'h' },
+		{ NULL,    0,                  NULL,  0  },
+	};
+	unsigned int sleep_sec = 2;
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+	uint64_t host_khz;
+	uint64_t freq;
+	int opt;
+
+	while ((opt = getopt_long(argc, argv, "s:h", long_opts, NULL)) != -1) {
+		switch (opt) {
+		case 's':
+			sleep_sec = atoi(optarg);
+			break;
+		case 'h':
+		default:
+			usage(argv[0]);
+			return opt == 'h' ? 0 : 1;
+		}
+	}
+
+	TEST_REQUIRE(sys_clocksource_is_based_on_tsc());
+	TEST_REQUIRE(kvm_has_cap(KVM_CAP_TSC_CONTROL));
+
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
+	configure_pvclock(vm);
+
+	/* Check KVM_GET_CLOCK_GUEST is supported */
+	{
+		struct pvclock_vcpu_time_info tmp;
+		int ret = __vcpu_ioctl(vcpu, KVM_GET_CLOCK_GUEST, &tmp);
+		TEST_REQUIRE(ret == 0);
+	}
+
+	/* First run at native frequency (no scaling). */
+	run_test(vm, vcpu, sleep_sec);
+
+	/*
+	 * Then enumerate a range of TSC frequencies crossing the 32-bit
+	 * boundary, to exercise the scaling path at various ratios.
+	 */
+	host_khz = __vcpu_ioctl(vcpu, KVM_GET_TSC_KHZ, NULL);
+	kvm_vm_free(vm);
+
+	for (freq = 1000000; freq <= 5000000; freq += 500000) {
+		if (freq == host_khz)
+			continue;
+		run_at_frequency(freq, sleep_sec);
+	}
+
+	test_tsc_stable_bit();
+	test_clock_guest_with_offsets();
+
+	return 0;
+}
+
+static volatile uint32_t vcpu_counter;
+static void guest_code_stable_bit(void)
+{
+	uint32_t idx = __atomic_fetch_add(&vcpu_counter, 1, __ATOMIC_SEQ_CST);
+	uint64_t gpa = KVMCLOCK_GPA + idx * sizeof(struct pvclock_vcpu_time_info);
+
+	wrmsr(MSR_KVM_SYSTEM_TIME_NEW, gpa | KVM_MSR_ENABLED);
+	GUEST_SYNC(0);
+	GUEST_SYNC(0);
+	GUEST_SYNC(0);
+}
+
+static void set_tsc_offset(struct kvm_vcpu *vcpu, uint64_t offset)
+{
+	struct kvm_device_attr attr = {
+		.group = KVM_VCPU_TSC_CTRL,
+		.attr = KVM_VCPU_TSC_OFFSET,
+		.addr = (__u64)(uintptr_t)&offset,
+	};
+
+	TEST_REQUIRE(__vcpu_has_device_attr(vcpu, KVM_VCPU_TSC_CTRL,
+					    KVM_VCPU_TSC_OFFSET) == 0);
+	vcpu_ioctl(vcpu, KVM_SET_DEVICE_ATTR, &attr);
+}
+
+static void run_vcpu_once(struct kvm_vcpu *vcpu)
+{
+	struct ucall uc;
+
+	vcpu_run(vcpu);
+	TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+	switch (get_ucall(vcpu, &uc)) {
+	case UCALL_ABORT:
+		REPORT_GUEST_ASSERT(uc);
+		break;
+	case UCALL_SYNC:
+		break;
+	default:
+		TEST_FAIL("Unexpected ucall");
+	}
+}
+
+static void test_tsc_stable_bit(void)
+{
+	struct pvclock_vcpu_time_info pvti;
+	struct kvm_vcpu *vcpus[2];
+	struct kvm_vm *vm;
+	int ret;
+
+	pr_info("Testing PVCLOCK_TSC_STABLE_BIT with matched/unmatched TSCs\n");
+
+	vm = vm_create_with_vcpus(2, guest_code_stable_bit, vcpus);
+	configure_pvclock(vm);
+
+	/*
+	 * Case 1: All TSCs matched (same frequency and offset).
+	 * Master clock should be active, PVCLOCK_TSC_STABLE_BIT set.
+	 */
+	run_vcpu_once(vcpus[0]);
+
+	ret = __vcpu_ioctl(vcpus[0], KVM_GET_CLOCK_GUEST, &pvti);
+	TEST_ASSERT(!ret, "GET_CLOCK_GUEST should succeed with matched TSCs");
+	TEST_ASSERT(pvti.flags & PVCLOCK_TSC_STABLE_BIT,
+		    "PVCLOCK_TSC_STABLE_BIT should be set with matched TSCs");
+
+	/*
+	 * Case 2: Different TSC offset, same frequency.
+	 * Master clock should still be active (frequency matches), but
+	 * PVCLOCK_TSC_STABLE_BIT should be cleared (offsets differ).
+	 */
+	set_tsc_offset(vcpus[1], 12345678);
+	run_vcpu_once(vcpus[1]);
+	run_vcpu_once(vcpus[0]);
+
+	ret = __vcpu_ioctl(vcpus[0], KVM_GET_CLOCK_GUEST, &pvti);
+	if (ret) {
+		/* Master clock disabled by offset mismatch — old kernel */
+		pr_info("  Skipping offset tests (master clock requires matched offsets)\n");
+		goto out_stable;
+	}
+	TEST_ASSERT(!(pvti.flags & PVCLOCK_TSC_STABLE_BIT),
+		    "PVCLOCK_TSC_STABLE_BIT should be clear with offset-mismatched TSCs");
+
+	/*
+	 * Case 3: Different TSC frequency.
+	 * Master clock should be disabled entirely.
+	 */
+	vcpu_ioctl(vcpus[1], KVM_SET_TSC_KHZ,
+		   (void *)(unsigned long)(__vcpu_ioctl(vcpus[1], KVM_GET_TSC_KHZ, NULL) / 2));
+	/* Write TSC to trigger kvm_synchronize_tsc / kvm_track_tsc_matching */
+	vcpu_set_msr(vcpus[1], MSR_IA32_TSC, 0);
+	run_vcpu_once(vcpus[1]);
+
+	ret = __vcpu_ioctl(vcpus[0], KVM_GET_CLOCK_GUEST, &pvti);
+	TEST_ASSERT(ret && errno == EINVAL,
+		    "GET_CLOCK_GUEST should fail with frequency-mismatched TSCs, got %d (errno %d)",
+		    ret, errno);
+
+out_stable:
+	kvm_vm_free(vm);
+}
+
+static void test_clock_guest_with_offsets(void)
+{
+	struct pvclock_vcpu_time_info pvti0, pvti1, pvti1_after;
+	struct kvm_vcpu *vcpus[2];
+	struct kvm_vm *vm;
+	int64_t delta;
+	int ret;
+
+	pr_info("Testing KVM_[GS]ET_CLOCK_GUEST with different TSC offsets\n");
+
+	vm = vm_create_with_vcpus(2, guest_code_stable_bit, vcpus);
+	configure_pvclock(vm);
+
+	/* Set different TSC offsets on the two vCPUs */
+	set_tsc_offset(vcpus[0], 0);
+	set_tsc_offset(vcpus[1], 1000000000ull);
+
+	/* Run both to establish kvmclock */
+	run_vcpu_once(vcpus[0]);
+	run_vcpu_once(vcpus[1]);
+
+	/* GET_CLOCK_GUEST on both — should succeed (master clock active) */
+	ret = __vcpu_ioctl(vcpus[0], KVM_GET_CLOCK_GUEST, &pvti0);
+	if (ret) {
+		pr_info("  Skipping (master clock requires matched offsets on this kernel)\n");
+		kvm_vm_free(vm);
+		return;
+	}
+	ret = __vcpu_ioctl(vcpus[1], KVM_GET_CLOCK_GUEST, &pvti1);
+	TEST_ASSERT(!ret, "GET_CLOCK_GUEST on vcpu1 failed");
+
+	/* The tsc_timestamps should differ (different offsets) */
+	TEST_ASSERT(pvti0.tsc_timestamp != pvti1.tsc_timestamp,
+		    "tsc_timestamps should differ with different offsets");
+
+	/* Sleep to let time elapse, then restore vcpu0's clock */
+	sleep(1);
+	vcpu_ioctl(vcpus[0], KVM_SET_CLOCK_GUEST, &pvti0);
+
+	/* Run vcpu0 to process the clock update */
+	run_vcpu_once(vcpus[0]);
+
+	/* GET_CLOCK_GUEST on vcpu1 — should reflect the correction */
+	ret = __vcpu_ioctl(vcpus[1], KVM_GET_CLOCK_GUEST, &pvti1_after);
+	TEST_ASSERT(!ret, "GET_CLOCK_GUEST on vcpu1 after SET failed");
+
+	/*
+	 * After SET on vcpu0, verify the correction worked by getting
+	 * the clock on vcpu0 again. The mul/shift should be the same,
+	 * and computing kvmclock at the same TSC should give the same
+	 * result as the original (within ±2ns).
+	 */
+	{
+		struct pvclock_vcpu_time_info pvti0_after;
+		uint64_t tsc_now, clk_from_old, clk_from_new;
+
+		ret = __vcpu_ioctl(vcpus[0], KVM_GET_CLOCK_GUEST, &pvti0_after);
+		TEST_ASSERT(!ret, "GET_CLOCK_GUEST on vcpu0 after SET failed");
+
+		tsc_now = pvti0_after.tsc_timestamp;
+		clk_from_old = pvclock_read_cycles(&pvti0, tsc_now);
+		clk_from_new = pvclock_read_cycles(&pvti0_after, tsc_now);
+
+		delta = (int64_t)clk_from_new - (int64_t)clk_from_old;
+		TEST_ASSERT(delta >= -2 && delta <= 2,
+			    "clock correction delta should be <=2ns, got %ld ns",
+			    delta);
+	}
+
+	/*
+	 * Also verify that vcpu1's clock is still accessible (master
+	 * clock still active with different offsets).
+	 */
+	ret = __vcpu_ioctl(vcpus[1], KVM_GET_CLOCK_GUEST, &pvti1_after);
+	TEST_ASSERT(!ret, "GET_CLOCK_GUEST on vcpu1 after SET failed");
+
+	kvm_vm_free(vm);
+}
-- 
2.55.0

[PATCH v7 34/36] KVM: selftests: Add master clock offset test

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Verify that KVM master clock mode remains active when vCPUs have
different TSC offsets but the same frequency. Creates three vCPUs,
sets one to a different TSC value, and confirms:

 - KVM_CLOCK_HOST_TSC is set (master clock active)
 - KVM_CLOCK_TSC_STABLE IS set (master clock ⇒ stable flag)
 - PVCLOCK_TSC_STABLE_BIT is NOT set (offsets differ)

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Assisted-by: Kiro (claude-opus-4.6-1m)
---
 tools/testing/selftests/kvm/Makefile.kvm      |   1 +
 .../kvm/x86/masterclock_offset_test.c         | 180 ++++++++++++++++++
 2 files changed, 181 insertions(+)
 create mode 100644 tools/testing/selftests/kvm/x86/masterclock_offset_test.c

diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
index 95539deea266..f6027a35f790 100644
--- a/tools/testing/selftests/kvm/Makefile.kvm
+++ b/tools/testing/selftests/kvm/Makefile.kvm
@@ -108,6 +108,7 @@ TEST_GEN_PROGS_x86 += x86/pmu_event_filter_test
 TEST_GEN_PROGS_x86 += x86/private_mem_conversions_test
 TEST_GEN_PROGS_x86 += x86/private_mem_kvm_exits_test
 TEST_GEN_PROGS_x86 += x86/pvclock_test
+TEST_GEN_PROGS_x86 += x86/masterclock_offset_test
 TEST_GEN_PROGS_x86 += x86/pvclock_migration_test
 TEST_GEN_PROGS_x86 += x86/set_boot_cpu_id
 TEST_GEN_PROGS_x86 += x86/set_sregs_test
diff --git a/tools/testing/selftests/kvm/x86/masterclock_offset_test.c b/tools/testing/selftests/kvm/x86/masterclock_offset_test.c
new file mode 100644
index 000000000000..88e2bd2edab5
--- /dev/null
+++ b/tools/testing/selftests/kvm/x86/masterclock_offset_test.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Test that KVM master clock mode works with different TSC offsets
+ * as long as all vCPUs have the same TSC frequency.
+ */
+#include <stdint.h>
+#include <string.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+
+#include <asm/pvclock-abi.h>
+
+#define KVMCLOCK_GPA	0xc0000000ull
+#define TSC_OFFSET	(1000000000ULL)
+
+static uint64_t pvclock_calc(struct pvclock_vcpu_time_info *pvti, uint64_t guest_tsc)
+{
+	uint64_t delta = guest_tsc - pvti->tsc_timestamp;
+
+	if (pvti->tsc_shift >= 0)
+		delta <<= pvti->tsc_shift;
+	else
+		delta >>= -(int)pvti->tsc_shift;
+
+	return pvti->system_time + ((__uint128_t)delta * pvti->tsc_to_system_mul >> 32);
+}
+
+static void guest_code(void)
+{
+	wrmsr(MSR_KVM_SYSTEM_TIME_NEW, KVMCLOCK_GPA | KVM_MSR_ENABLED);
+	for (;;)
+		GUEST_SYNC(0);
+}
+
+int main(void)
+{
+	struct kvm_vcpu *vcpus[3];
+	struct kvm_clock_data clock;
+	struct pvclock_vcpu_time_info pvti[3];
+	struct kvm_vm *vm;
+	uint64_t offset0, host_tsc, clk0, clk2;
+	int i;
+
+	TEST_REQUIRE(sys_clocksource_is_based_on_tsc());
+
+	vm = vm_create_with_vcpus(3, guest_code, vcpus);
+
+	TEST_REQUIRE(!__vcpu_has_device_attr(vcpus[0], KVM_VCPU_TSC_CTRL,
+					     KVM_VCPU_TSC_OFFSET));
+
+	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
+				    KVMCLOCK_GPA, 1,
+				    vm_calc_num_guest_pages(VM_MODE_DEFAULT,
+							   getpagesize()), 0);
+	virt_map(vm, KVMCLOCK_GPA, KVMCLOCK_GPA,
+		 vm_calc_num_guest_pages(VM_MODE_DEFAULT, getpagesize()));
+
+	/* Get vCPU 0's default offset and set vCPU 2's offset higher */
+	vcpu_device_attr_get(vcpus[0], KVM_VCPU_TSC_CTRL,
+			     KVM_VCPU_TSC_OFFSET, &offset0);
+	uint64_t offset2 = offset0 + TSC_OFFSET;
+	vcpu_device_attr_set(vcpus[2], KVM_VCPU_TSC_CTRL,
+			     KVM_VCPU_TSC_OFFSET, &offset2);
+
+	/* Run each vCPU to enable kvmclock (with offset already set) */
+	for (i = 0; i < 3; i++) {
+		vcpu_run(vcpus[i]);
+		TEST_ASSERT_KVM_EXIT_REASON(vcpus[i], KVM_EXIT_IO);
+	}
+
+	/* Check master clock is active */
+	memset(&clock, 0, sizeof(clock));
+	vm_ioctl(vm, KVM_GET_CLOCK, &clock);
+	pr_info("KVM_GET_CLOCK flags: 0x%x\n", clock.flags);
+	TEST_ASSERT(clock.flags & KVM_CLOCK_HOST_TSC,
+		    "Master clock should be active, flags=0x%x", clock.flags);
+	TEST_ASSERT(clock.flags & KVM_CLOCK_TSC_STABLE,
+		    "KVM_CLOCK_TSC_STABLE should be set, flags=0x%x", clock.flags);
+
+	/* Get per-vCPU pvclock in order 0, 2, 1 */
+	int order[] = {0, 2, 1};
+	for (i = 0; i < 3; i++) {
+		int idx = order[i];
+		__vcpu_ioctl(vcpus[idx], KVM_GET_CLOCK_GUEST, &pvti[idx]);
+		pr_info("vCPU %d: tsc_timestamp=%lu system_time=%lu "
+			"mul=%u shift=%d flags=0x%x\n",
+			idx, (unsigned long)pvti[idx].tsc_timestamp,
+			(unsigned long)pvti[idx].system_time,
+			pvti[idx].tsc_to_system_mul, pvti[idx].tsc_shift,
+			pvti[idx].flags);
+	}
+
+	/* Read guest TSCs: should see (0+OFF) < 2 < (1+OFF) */
+	uint64_t gtsc0 = vcpu_get_msr(vcpus[0], MSR_IA32_TSC);
+	uint64_t gtsc2 = vcpu_get_msr(vcpus[2], MSR_IA32_TSC);
+	uint64_t gtsc1 = vcpu_get_msr(vcpus[1], MSR_IA32_TSC);
+	pr_info("Guest TSCs: vcpu0=%lu vcpu2=%lu vcpu1=%lu\n",
+		(unsigned long)gtsc0, (unsigned long)gtsc2, (unsigned long)gtsc1);
+	pr_info("vcpu0+OFF=%lu vcpu1+OFF=%lu\n",
+		(unsigned long)(gtsc0 + TSC_OFFSET),
+		(unsigned long)(gtsc1 + TSC_OFFSET));
+	TEST_ASSERT(gtsc0 + TSC_OFFSET < gtsc2 && gtsc2 < gtsc1 + TSC_OFFSET,
+		    "Expected (vcpu0+OFF) < vcpu2 < (vcpu1+OFF)");
+
+	/* PVCLOCK_TSC_STABLE_BIT should NOT be set (offsets differ) */
+	TEST_ASSERT(!(pvti[2].flags & PVCLOCK_TSC_STABLE_BIT),
+		    "PVCLOCK_TSC_STABLE_BIT should NOT be set, flags=0x%x",
+		    pvti[2].flags);
+
+	/* Same mul/shift */
+	TEST_ASSERT(pvti[0].tsc_to_system_mul == pvti[2].tsc_to_system_mul &&
+		    pvti[0].tsc_shift == pvti[2].tsc_shift,
+		    "All vCPUs should have same mul/shift");
+
+	/*
+	 * Read host TSC once. At this instant:
+	 *   vCPU 0 guest TSC = host_tsc + offset0
+	 *   vCPU 2 guest TSC = host_tsc + offset0 + TSC_OFFSET
+	 * Feed each through its pvclock. Expect the same kvmclock.
+	 */
+	host_tsc = rdtsc();
+	clk0 = pvclock_calc(&pvti[0], host_tsc + offset0);
+	clk2 = pvclock_calc(&pvti[2], host_tsc + offset0 + TSC_OFFSET);
+
+	pr_info("kvmclock via vCPU 0: %lu ns\n", (unsigned long)clk0);
+	pr_info("kvmclock via vCPU 2: %lu ns\n", (unsigned long)clk2);
+	TEST_ASSERT(clk0 == clk2,
+		    "kvmclock from offset vCPUs should match exactly, "
+		    "diff=%ld ns", (long)(clk2 - clk0));
+
+	pr_info("PASSED: pvclock consistent across offset vCPUs\n");
+
+	/*
+	 * Now add an hour to the VM kvmclock via KVM_SET_CLOCK, run each
+	 * vCPU to pick up the update, and check they're still in sync.
+	 */
+	{
+#define ONE_HOUR_NS (3600ULL * NSEC_PER_SEC)
+		struct kvm_clock_data setclk = { .clock = clock.clock + ONE_HOUR_NS };
+
+		vm_ioctl(vm, KVM_SET_CLOCK, &setclk);
+	}
+
+	/* Guest code does GUEST_SYNC then exits — run each to see update */
+	for (i = 0; i < 3; i++) {
+		vcpu_run(vcpus[order[i]]);
+		TEST_ASSERT_KVM_EXIT_REASON(vcpus[order[i]], KVM_EXIT_IO);
+	}
+
+	/* Re-read pvclocks */
+	for (i = 0; i < 3; i++)
+		__vcpu_ioctl(vcpus[order[i]], KVM_GET_CLOCK_GUEST, &pvti[order[i]]);
+
+	pr_info("After +1h: vCPU 0 system_time=%lu, vCPU 2 system_time=%lu\n",
+		(unsigned long)pvti[0].system_time,
+		(unsigned long)pvti[2].system_time);
+	TEST_ASSERT(pvti[0].system_time == pvti[2].system_time,
+		    "system_time should still match after KVM_SET_CLOCK");
+
+	host_tsc = rdtsc();
+	clk0 = pvclock_calc(&pvti[0], host_tsc + offset0);
+	clk2 = pvclock_calc(&pvti[2], host_tsc + offset0 + TSC_OFFSET);
+
+	pr_info("After +1h: kvmclock via vCPU 0: %lu ns\n", (unsigned long)clk0);
+	pr_info("After +1h: kvmclock via vCPU 2: %lu ns\n", (unsigned long)clk2);
+	TEST_ASSERT(clk0 == clk2,
+		    "After +1h: kvmclock should still match, diff=%ld ns",
+		    (long)(clk2 - clk0));
+
+	/* Verify the clock actually moved by ~1 hour */
+	TEST_ASSERT(clk0 > ONE_HOUR_NS,
+		    "Clock should be > 1 hour after set, got %lu ns",
+		    (unsigned long)clk0);
+
+	pr_info("PASSED: pvclock still consistent after KVM_SET_CLOCK +1h\n");
+	kvm_vm_free(vm);
+	return 0;
+}
-- 
2.55.0

[PATCH v7 35/36] KVM: selftests: Add Xen/generic CPUID timing leaf test

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Verify that userspace can correctly populate Xen and generic CPUID
timing leaves using the KVM_VCPU_TSC_SCALE and
KVM_VCPU_TSC_SCALE attributes.

This validates that the removal of KVM's runtime Xen CPUID modification
doesn't break guests: userspace queries the effective TSC and bus
frequencies, computes the pvclock mul/shift, populates the CPUID leaves,
and the guest verifies the values match.

The test exercises:
 - KVM_VCPU_TSC_SCALE at native and scaled frequencies
 - KVM_VCPU_TSC_SCALE ratio verification against effective frequency
 - Generic timing leaf 0x40000010 (EAX=tsc_khz, EBX=bus_khz)
 - Xen leaf 3 sub-leaf 0 (ECX=guest TSC kHz)
 - Xen leaf 3 sub-leaf 1 (ECX=mul, EDX=shift)

Gracefully skips TSC scaling tests on hardware without support.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 tools/testing/selftests/kvm/Makefile.kvm      |   1 +
 .../selftests/kvm/x86/xen_cpuid_timing_test.c | 230 ++++++++++++++++++
 2 files changed, 231 insertions(+)
 create mode 100644 tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c

diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
index f6027a35f790..2029190f86d1 100644
--- a/tools/testing/selftests/kvm/Makefile.kvm
+++ b/tools/testing/selftests/kvm/Makefile.kvm
@@ -145,6 +145,7 @@ TEST_GEN_PROGS_x86 += x86/xss_msr_test
 TEST_GEN_PROGS_x86 += x86/debug_regs
 TEST_GEN_PROGS_x86 += x86/tsc_msrs_test
 TEST_GEN_PROGS_x86 += x86/vmx_pmu_caps_test
+TEST_GEN_PROGS_x86 += x86/xen_cpuid_timing_test
 TEST_GEN_PROGS_x86 += x86/xen_shinfo_test
 TEST_GEN_PROGS_x86 += x86/xen_vmcall_test
 TEST_GEN_PROGS_x86 += x86/sev_dbg_test
diff --git a/tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c b/tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c
new file mode 100644
index 000000000000..2098cb511ef0
--- /dev/null
+++ b/tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Test that userspace can correctly populate Xen and generic CPUID
+ * timing leaves using KVM_GET_TSC_KHZ and KVM_VCPU_TSC_SCALE.
+ *
+ * This validates that the removal of KVM's runtime Xen CPUID modification
+ * doesn't break guests, because userspace has all the information needed.
+ */
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+
+#include <asm/pvclock-abi.h>
+
+#define XEN_CPUID_BASE		0x40000100
+#define XEN_CPUID_LEAF(n)	(XEN_CPUID_BASE + (n))
+#define GENERIC_TIMING_LEAF	0x40000010
+
+/* Values set by host, verified by guest */
+static uint32_t expected_tsc_khz;
+static uint32_t expected_bus_khz;
+static uint32_t expected_tsc_mul;
+static int8_t   expected_tsc_shift;
+static uint64_t host_khz;
+
+static void guest_code(void)
+{
+	uint32_t eax, ebx, ecx, edx;
+
+	/* Check generic timing leaf 0x40000010 */
+	__cpuid(GENERIC_TIMING_LEAF, 0, &eax, &ebx, &ecx, &edx);
+	GUEST_ASSERT_EQ(eax, expected_tsc_khz);
+	GUEST_ASSERT_EQ(ebx, expected_bus_khz);
+
+	/* Check Xen leaf 3, sub-leaf 0: ECX = guest TSC frequency */
+	__cpuid(XEN_CPUID_LEAF(3), 0, &eax, &ebx, &ecx, &edx);
+	GUEST_ASSERT_EQ(ecx, expected_tsc_khz);
+
+	/* Check Xen leaf 3, sub-leaf 1: ECX = mul, EDX = shift */
+	__cpuid(XEN_CPUID_LEAF(3), 1, &eax, &ebx, &ecx, &edx);
+	GUEST_ASSERT_EQ(ecx, expected_tsc_mul);
+	GUEST_ASSERT_EQ((int8_t)edx, expected_tsc_shift);
+
+	GUEST_SYNC(0);
+}
+
+static void add_cpuid_entry(struct kvm_vcpu *vcpu, uint32_t function,
+			    uint32_t index, uint32_t eax, uint32_t ebx,
+			    uint32_t ecx, uint32_t edx)
+{
+	struct kvm_cpuid2 *cpuid = vcpu->cpuid;
+	struct kvm_cpuid_entry2 *entry;
+	int n = cpuid->nent;
+
+	vcpu->cpuid = realloc(vcpu->cpuid,
+			      sizeof(*cpuid) + (n + 1) * sizeof(*entry));
+	cpuid = vcpu->cpuid;
+	cpuid->nent = n + 1;
+
+	entry = &cpuid->entries[n];
+	memset(entry, 0, sizeof(*entry));
+	entry->function = function;
+	entry->index = index;
+	entry->flags = KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
+	entry->eax = eax;
+	entry->ebx = ebx;
+	entry->ecx = ecx;
+	entry->edx = edx;
+}
+
+/*
+ * Compute pvclock mul/shift from frequency, matching kvm_get_time_scale().
+ */
+static void compute_tsc_mul_shift(uint64_t tsc_hz, uint32_t *mul, int8_t *shift)
+{
+	uint64_t scaled = 1000000000ULL;
+	uint64_t base = tsc_hz;
+	int32_t s = 0;
+	uint32_t base32;
+
+	while (base > scaled * 2 || base >> 32) {
+		base >>= 1;
+		s--;
+	}
+	base32 = (uint32_t)base;
+	while (base32 <= scaled || scaled >> 32) {
+		if (scaled >> 32 || base32 & (1U << 31))
+			scaled >>= 1;
+		else
+			base32 <<= 1;
+		s++;
+	}
+	*mul = (uint32_t)((scaled << 32) / base32);
+	*shift = (int8_t)s;
+}
+
+static void run_test(uint64_t tsc_khz)
+{
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+	struct ucall uc;
+	uint32_t effective_tsc_khz, effective_bus_khz;
+	int bus_cycle_ns;
+
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
+
+	if (tsc_khz) {
+		pr_info("Testing at TSC frequency %lu kHz\n", tsc_khz);
+		vcpu_ioctl(vcpu, KVM_SET_TSC_KHZ, (void *)(unsigned long)tsc_khz);
+	} else {
+		pr_info("Testing at native TSC frequency\n");
+	}
+
+	effective_tsc_khz = __vcpu_ioctl(vcpu, KVM_GET_TSC_KHZ, NULL);
+	bus_cycle_ns = vm_check_cap(vm, KVM_CAP_X86_APIC_BUS_CYCLES_NS);
+	effective_bus_khz = bus_cycle_ns > 0 ? 1000000 / bus_cycle_ns : 1000000;
+
+	/* If scaling wasn't applied, skip this frequency */
+	if (tsc_khz && effective_tsc_khz == host_khz) {
+		pr_info("  TSC scaling not available, skipping\n");
+		kvm_vm_free(vm);
+		return;
+	}
+
+	pr_info("  Effective TSC: %u kHz, Bus: %u kHz\n", effective_tsc_khz, effective_bus_khz);
+
+	/* Also exercise KVM_VCPU_TSC_SCALE if available */
+	{
+		struct { uint64_t ratio; uint64_t frac_bits; } scale;
+		struct kvm_device_attr scale_attr = {
+			.group = KVM_VCPU_TSC_CTRL,
+			.attr = KVM_VCPU_TSC_SCALE,
+			.addr = (uint64_t)(uintptr_t)&scale,
+		};
+
+		if (!__vcpu_ioctl(vcpu, KVM_HAS_DEVICE_ATTR, &scale_attr)) {
+			vcpu_ioctl(vcpu, KVM_GET_DEVICE_ATTR, &scale_attr);
+			pr_info("  TSC scale: ratio=%lu frac_bits=%lu\n",
+				scale.ratio, scale.frac_bits);
+
+			/*
+			 * Verify: applying the ratio to the host TSC frequency
+			 * should give approximately the effective frequency.
+			 */
+			if (tsc_khz) {
+				uint64_t computed = ((__uint128_t)host_khz * scale.ratio) >> scale.frac_bits;
+				int64_t diff = (int64_t)computed - (int64_t)effective_tsc_khz;
+
+				TEST_ASSERT(diff >= -1 && diff <= 1,
+					    "TSC_SCALE ratio mismatch: computed %lu vs effective %u (diff %ld)",
+					    computed, effective_tsc_khz, diff);
+			}
+		}
+	}
+
+	compute_tsc_mul_shift((uint64_t)effective_tsc_khz * 1000,
+			      &expected_tsc_mul, &expected_tsc_shift);
+
+	expected_tsc_khz = effective_tsc_khz;
+	expected_bus_khz = effective_bus_khz;
+
+	sync_global_to_guest(vm, expected_tsc_khz);
+	sync_global_to_guest(vm, expected_bus_khz);
+	sync_global_to_guest(vm, expected_tsc_mul);
+	sync_global_to_guest(vm, expected_tsc_shift);
+
+	/* Populate CPUID leaves as a VMM would */
+	add_cpuid_entry(vcpu, GENERIC_TIMING_LEAF, 0,
+			effective_tsc_khz, effective_bus_khz, 0, 0);
+	add_cpuid_entry(vcpu, XEN_CPUID_LEAF(3), 0,
+			0, 0, effective_tsc_khz, 0);
+	add_cpuid_entry(vcpu, XEN_CPUID_LEAF(3), 1,
+			0, 0, expected_tsc_mul,
+			(uint32_t)(uint8_t)expected_tsc_shift);
+
+	vcpu_set_cpuid(vcpu);
+
+	pr_info("  pvclock mul=%u shift=%d\n", expected_tsc_mul, expected_tsc_shift);
+
+	vcpu_run(vcpu);
+	TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+
+	switch (get_ucall(vcpu, &uc)) {
+	case UCALL_ABORT:
+		REPORT_GUEST_ASSERT(uc);
+		break;
+	case UCALL_SYNC:
+		break;
+	default:
+		TEST_FAIL("Unexpected ucall");
+	}
+
+	kvm_vm_free(vm);
+}
+
+int main(void)
+{
+	uint64_t freq;
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+	struct kvm_device_attr attr = {
+		.group = KVM_VCPU_TSC_CTRL,
+		.attr = KVM_VCPU_TSC_SCALE,
+	};
+
+	TEST_REQUIRE(sys_clocksource_is_based_on_tsc());
+
+	/* Check KVM_VCPU_TSC_SCALE is supported (implies TSC scaling) */
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
+	TEST_REQUIRE(!__vcpu_ioctl(vcpu, KVM_HAS_DEVICE_ATTR, &attr));
+	host_khz = __vcpu_ioctl(vcpu, KVM_GET_TSC_KHZ, NULL);
+	kvm_vm_free(vm);
+
+	/* Native frequency */
+	run_test(0);
+
+	/* Scaled frequencies — skip if TSC scaling not available */
+	for (freq = 1000000; freq <= 4000000; freq += 1000000) {
+		if (freq == host_khz)
+			continue;
+		run_test(freq);
+	}
+
+	pr_info("PASS: All CPUID timing leaf tests passed\n");
+	return 0;
+}
-- 
2.55.0

[PATCH v7 36/36] KVM: selftests: Add Xen runstate migration test

[David Woodhouse]

From: David Woodhouse <dwmw@amazon.co.uk>

Test that Xen runstate (steal time) is correctly accounted across a
simulated live migration using KVM_XEN_VCPU_ATTR and KVM_[GS]ET_CLOCK_GUEST.

The test simulates what a real VMM does during migration:
1. Creates a VM with Xen HVM config and runstate tracking
2. Runs the guest to accumulate some kvmclock time
3. Saves clock (KVM_GET_CLOCK_GUEST), TSC offset, and runstate
4. Marks the saved state as RUNSTATE_runnable (vCPU not running)
5. Destroys the source VM
6. Sleeps 10ms (simulating migration network transfer time)
7. Creates a new VM and restores all state precisely as saved
8. Runs the guest and verifies the migration gap appears as steal

The guest TSC is transferred via the KVM_VCPU_TSC_OFFSET attribute. As
the "migration" is to a new VM on the same host, restoring the same
offset makes the guest TSC continue uninterrupted across the gap, so the
restored pvclock yields a kvmclock which has kept running too. That is
what makes the migration gap visible: the destination kvmclock is ahead
of the saved state_entry_time by (at least) the gap duration, rather
than restarting from the destination VM's creation time.

The kernel accounts the gap because: on vcpu_load, it transitions from
RUNSTATE_runnable to RUNSTATE_running, computing delta = kvmclock_now -
state_entry_time. Since kvmclock has advanced past the saved entry time
(real time elapsed during migration), the delta is added to time_runnable.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
---
 tools/testing/selftests/kvm/Makefile.kvm      |   1 +
 .../selftests/kvm/x86/xen_migration_test.c    | 205 ++++++++++++++++++
 2 files changed, 206 insertions(+)
 create mode 100644 tools/testing/selftests/kvm/x86/xen_migration_test.c

diff --git a/tools/testing/selftests/kvm/Makefile.kvm b/tools/testing/selftests/kvm/Makefile.kvm
index 2029190f86d1..a2c4aadeb844 100644
--- a/tools/testing/selftests/kvm/Makefile.kvm
+++ b/tools/testing/selftests/kvm/Makefile.kvm
@@ -146,6 +146,7 @@ TEST_GEN_PROGS_x86 += x86/debug_regs
 TEST_GEN_PROGS_x86 += x86/tsc_msrs_test
 TEST_GEN_PROGS_x86 += x86/vmx_pmu_caps_test
 TEST_GEN_PROGS_x86 += x86/xen_cpuid_timing_test
+TEST_GEN_PROGS_x86 += x86/xen_migration_test
 TEST_GEN_PROGS_x86 += x86/xen_shinfo_test
 TEST_GEN_PROGS_x86 += x86/xen_vmcall_test
 TEST_GEN_PROGS_x86 += x86/sev_dbg_test
diff --git a/tools/testing/selftests/kvm/x86/xen_migration_test.c b/tools/testing/selftests/kvm/x86/xen_migration_test.c
new file mode 100644
index 000000000000..e43846a77e61
--- /dev/null
+++ b/tools/testing/selftests/kvm/x86/xen_migration_test.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Test Xen runstate (steal time) preservation across simulated migration.
+ *
+ * Verifies that the kernel correctly accounts the migration gap as
+ * steal time (runnable) when runstate data is saved and restored
+ * precisely, but real time elapses during the migration.
+ *
+ * The key insight: userspace saves the runstate with state=RUNSTATE_runnable
+ * (the vCPU is not running during migration). On restore, the kernel sees
+ * that kvmclock has advanced past state_entry_time, and accounts the
+ * difference as time spent in the runnable state.
+ */
+#include <inttypes.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "test_util.h"
+#include "kvm_util.h"
+#include "processor.h"
+
+#include <asm/pvclock-abi.h>
+
+#define SHINFO_GPA	0xc0000000ULL
+#define RUNSTATE_GPA	(SHINFO_GPA + 0x1000)
+
+#define RUNSTATE_running  0
+#define RUNSTATE_runnable 1
+#define RUNSTATE_blocked  2
+#define RUNSTATE_offline  3
+
+struct vcpu_runstate_info {
+	uint32_t state;
+	uint64_t state_entry_time;
+	uint64_t time[4];
+} __attribute__((packed));
+
+static void guest_code(void)
+{
+	volatile struct vcpu_runstate_info *rs =
+		(void *)(unsigned long)RUNSTATE_GPA;
+
+	/* Report runstate times — no need to enable kvmclock MSR,
+	 * the kernel writes runstate using its internal kvmclock. */
+	GUEST_SYNC_ARGS(0, rs->time[RUNSTATE_runnable],
+			rs->time[RUNSTATE_running], 0, 0);
+}
+
+static struct kvm_vm *create_xen_vm(struct kvm_vcpu **vcpu)
+{
+	struct kvm_vm *vm;
+	int xen_caps;
+
+	vm = vm_create_with_one_vcpu(vcpu, guest_code);
+
+	xen_caps = kvm_check_cap(KVM_CAP_XEN_HVM);
+	TEST_REQUIRE(xen_caps & KVM_XEN_HVM_CONFIG_SHARED_INFO);
+	TEST_REQUIRE(xen_caps & KVM_XEN_HVM_CONFIG_RUNSTATE);
+
+	/* Map pages */
+	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
+				    SHINFO_GPA, 1, 2, 0);
+	virt_map(vm, SHINFO_GPA, SHINFO_GPA, 2);
+
+	/* Enable Xen HVM with MSR interception (enables runstate tracking) */
+	struct kvm_xen_hvm_config cfg = {
+		.flags = KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL,
+		.msr = 0x40000000,
+	};
+	vm_ioctl(vm, KVM_XEN_HVM_CONFIG, &cfg);
+
+	/* Set shared_info */
+	struct kvm_xen_hvm_attr ha = {
+		.type = KVM_XEN_ATTR_TYPE_SHARED_INFO,
+		.u.shared_info.gfn = SHINFO_GPA >> 12,
+	};
+	vm_ioctl(vm, KVM_XEN_HVM_SET_ATTR, &ha);
+
+	/* Set runstate address */
+	struct kvm_xen_vcpu_attr rs_addr = {
+		.type = KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR,
+		.u.gpa = RUNSTATE_GPA,
+	};
+	vcpu_ioctl(*vcpu, KVM_XEN_VCPU_SET_ATTR, &rs_addr);
+
+	return vm;
+}
+
+int main(void)
+{
+	struct pvclock_vcpu_time_info pvti;
+	struct kvm_xen_vcpu_attr runstate_save;
+	struct kvm_vcpu *vcpu;
+	struct kvm_vm *vm;
+	struct ucall uc;
+	uint64_t tsc_offset;
+	int ret;
+
+	/* === SOURCE SIDE === */
+	pr_info("=== Source: create VM and run guest ===\n");
+	vm = create_xen_vm(&vcpu);
+
+	/* Run guest once to accumulate some runstate time */
+	vcpu_run(vcpu);
+	TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+	TEST_ASSERT_EQ(get_ucall(vcpu, &uc), UCALL_SYNC);
+
+	pr_info("  Guest sees: runnable=%" PRIu64 " running=%" PRIu64 "\n",
+		uc.args[2], uc.args[3]);
+
+	/* Save clock state */
+	ret = __vcpu_ioctl(vcpu, KVM_GET_CLOCK_GUEST, &pvti);
+	TEST_ASSERT(!ret, "KVM_GET_CLOCK_GUEST failed");
+
+	/*
+	 * Save the guest TSC offset. This test migrates to a new VM on
+	 * the same host, so restoring the same offset makes the guest
+	 * TSC continue uninterrupted across the migration gap, and the
+	 * restored pvclock (KVM_SET_CLOCK_GUEST) then yields a kvmclock
+	 * which has also kept running across the gap. (A real migration
+	 * to a different host would compute the destination offset from
+	 * KVM_GET_CLOCK's {host_tsc, realtime} pair as described in
+	 * Documentation/virt/kvm/devices/vcpu.rst.)
+	 */
+	vcpu_device_attr_get(vcpu, KVM_VCPU_TSC_CTRL, KVM_VCPU_TSC_OFFSET,
+			     &tsc_offset);
+
+	/* Save runstate — the vCPU is now "runnable" (not running) */
+	runstate_save.type = KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA;
+	vcpu_ioctl(vcpu, KVM_XEN_VCPU_GET_ATTR, &runstate_save);
+
+	/*
+	 * Transition to runnable state before saving — the vCPU is
+	 * not running during migration.
+	 */
+	runstate_save.u.runstate.state = RUNSTATE_runnable;
+
+	pr_info("  Saved runstate: running=%" PRIu64 " runnable=%" PRIu64
+		" entry=%" PRIu64 "\n",
+		(uint64_t)runstate_save.u.runstate.time_running,
+		(uint64_t)runstate_save.u.runstate.time_runnable,
+		(uint64_t)runstate_save.u.runstate.state_entry_time);
+
+	uint64_t saved_runnable = runstate_save.u.runstate.time_runnable;
+
+	kvm_vm_free(vm);
+
+	/* === MIGRATION GAP === */
+	pr_info("=== Simulating migration (sleeping 10ms) ===\n");
+	usleep(10000);
+
+	/* === DESTINATION SIDE === */
+	pr_info("=== Destination: create new VM and restore ===\n");
+	vm = create_xen_vm(&vcpu);
+
+	/* Restore the guest TSC offset (same host: TSC continues) */
+	vcpu_device_attr_set(vcpu, KVM_VCPU_TSC_CTRL, KVM_VCPU_TSC_OFFSET,
+			     &tsc_offset);
+
+	/* Restore clock — kvmclock will now be ~10ms ahead of the snapshot */
+	vcpu_ioctl(vcpu, KVM_SET_CLOCK_GUEST, &pvti);
+
+	/* Restore runstate exactly as saved (state=runnable) */
+	runstate_save.type = KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA;
+	ret = __vcpu_ioctl(vcpu, KVM_XEN_VCPU_SET_ATTR, &runstate_save);
+	TEST_ASSERT(!ret, "Restore runstate failed: errno %d", errno);
+
+	/*
+	 * Run the guest. When the vCPU enters vcpu_run, the kernel
+	 * transitions from RUNSTATE_runnable to RUNSTATE_running.
+	 * It computes: delta = kvmclock_now - state_entry_time
+	 * This delta (which includes the migration gap) is added to
+	 * time_runnable (steal time).
+	 */
+	vcpu_run(vcpu);
+	TEST_ASSERT_KVM_EXIT_REASON(vcpu, KVM_EXIT_IO);
+	TEST_ASSERT_EQ(get_ucall(vcpu, &uc), UCALL_SYNC);
+
+	uint64_t guest_runnable = uc.args[2];
+	uint64_t guest_running = uc.args[3];
+
+	pr_info("  Guest sees: runnable=%" PRIu64 " running=%" PRIu64 "\n",
+		guest_runnable, guest_running);
+
+	uint64_t steal_increase = guest_runnable - saved_runnable;
+	pr_info("  Steal time increase: %" PRIu64 " ns (migration gap)\n",
+		steal_increase);
+
+	/*
+	 * The steal time increase should be at least 10ms (the sleep)
+	 * but not more than 5s (allowing for VM creation overhead).
+	 * The actual gap is from the source's state_entry_time to the
+	 * destination's kvmclock "now" at vcpu_load time.
+	 */
+	TEST_ASSERT(steal_increase >= 10000000ULL &&
+		    steal_increase < 5000000000ULL,
+		    "Steal time increase %" PRIu64 " ns not in expected range "
+		    "[10ms, 5s]", steal_increase);
+
+	kvm_vm_free(vm);
+	pr_info("PASS: Migration gap correctly accounted as steal time\n");
+	return 0;
+}
-- 
2.55.0

Re: [PATCH v7 14/36] KVM: x86: Improve synchronization in kvm_synchronize_tsc()

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] Incorrect TSC calculation during synchronization mixes different time bases (generation base vs. relative elapsed time), causing the guest TSC to drift backwards for 3rd and subsequent vCPUs.
- [Medium] The commit message claims to reset {data, ns} to previous values, but the code actively advances the reference point instead.
--

--- Patch [14]: [PATCH v7 14/36] KVM: x86: Improve synchronization in kvm_synchronize_tsc() ---
commit 19537539a4f15d4647e8e8b2f7465c1412098ea0
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Improve synchronization in kvm_synchronize_tsc()

This commit addresses issues with how last_tsc_write and last_tsc_nsec were
recorded, which caused subsequent writes to fail synchronization. It also
unifies the TSC reads used for calculating current time by using
kvm_get_time_and_clockread() where possible.

> Fix that by resetting {data, ns} to the previous values before passing
> them to __kvm_synchronize_tsc() when synchronization is detected.
> Except in the case where the TSC is unstable and *has* to be synthesised
> from the host clock, in which case attempt to create a nsec/tsc pair
> which is on the correct line.

[Severity: Medium]
The commit message states that it fixes the issue by resetting data and ns
to the previous values, but the code appears to actively advance the
reference point instead.

Could the commit message be updated to more accurately reflect the implemented
logic?

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 083ab2ca6282f..a1265d1f5c3fe 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c

[ ... ]

> @@ -1347,13 +1360,18 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
>           */
>  	if (synchronizing &&
>  	    vcpu->arch.virtual_tsc_khz == kvm->arch.last_tsc_khz) {
> -		if (!kvm_check_tsc_unstable()) {
> +		/*
> +		 * If synchronizing, advance the reference point to "now"
> +		 * so the matching window slides forward with each vCPU.
> +		 */
> +		u64 delta = nsec_to_cycles(vcpu, elapsed);
> +
> +		data = kvm->arch.cur_tsc_write + delta;

[Severity: High]
Does this calculate an incorrect TSC value by mixing different time bases?

It appears that elapsed is computed as the time since the previous vCPU,
but delta is added to kvm->arch.cur_tsc_write, which is the absolute base
TSC of the first vCPU in the generation.

If a VM is created with 3 or more vCPUs, wouldn't the time elapsed between
the 1st and 2nd vCPUs be lost when calculating for the 3rd vCPU? This seems
like it could cause the guest TSC to drift backwards across vCPUs.

> +
> +		if (!kvm_check_tsc_unstable())
>  			offset = kvm->arch.cur_tsc_offset;
> -		} else {
> -			u64 delta = nsec_to_cycles(vcpu, elapsed);
> -			data += delta;
> -			offset = kvm_compute_l1_tsc_offset(vcpu, rdtsc(), data);
> -		}
> +		else
> +			offset = kvm_compute_l1_tsc_offset(vcpu, host_tsc, data);
>  		matched = true;
>  	}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=14

Re: [PATCH v7 15/36] KVM: x86: Kill last_tsc_{nsec,write,offset} fields

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] The S4 backward-TSC adjustment corrupts KVM's master TSC synchronization variables by applying mathematically flawed adjustments, breaking TSC synchronization for vCPUs created after an S4 resume.
--

--- Patch [15]: [PATCH v7 15/36] KVM: x86: Kill last_tsc_{nsec,write,offset} fields ---
commit fe7a0a3f31b36e1ed842426f2ccc55e88a7c3fe0
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Kill last_tsc_{nsec,write,offset} fields

This commit removes the redundant last_tsc_* fields in favor of using the
cur_tsc_* fields as the single source of truth for TSC generation state. It
also updates the S4 backwards-TSC adjustment to apply the TSC delta to the
cur_tsc_* tracking variables so future vCPUs synchronize correctly.

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c

[ ... ]

> @@ -9778,13 +9774,18 @@ int kvm_arch_enable_virtualization_cpu(void)
>  			}
>  
>  			/*
> -			 * We have to disable TSC offset matching.. if you were
> -			 * booting a VM while issuing an S4 host suspend....
> -			 * you may have some problem.  Solving this issue is
> -			 * left as an exercise to the reader.
> +			 * Adjust the TSC matching reference by the same
> +			 * delta applied to each vCPU's offset, so that
> +			 * future KVM_SET_TSC / vCPU creation still matches
> +			 * correctly against the adjusted TSC timeline.
> +			 * Scale from host to guest TSC rate.
>  			 */
> -			kvm->arch.last_tsc_nsec = 0;
> -			kvm->arch.last_tsc_write = 0;
> +			raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
> +			kvm->arch.cur_tsc_write -=
> +				kvm_scale_tsc(delta_cyc,
> +					      kvm->arch.cur_tsc_scaling_ratio);
> +			kvm->arch.cur_tsc_offset += delta_cyc;

[Severity: High]
Is delta_cyc correctly scaled here before being added to cur_tsc_offset? 

delta_cyc represents host cycles, but it is being added directly to 
cur_tsc_offset. If the guest has a different TSC scaling ratio, could adding 
unscaled host cycles to the offset cause desynchronization for newly 
hotplugged vCPUs?

Additionally, does subtracting the scaled delta_cyc from cur_tsc_write shift 
the guest TSC reference too far backwards? delta_cyc in this context 
represents the host's entire pre-suspend uptime. Because elapsed time relies 
on CLOCK_MONOTONIC_RAW (which pauses during suspend, preserving time 
continuity), subtracting the entire pre-suspend uptime might artificially 
shift the reference and break the 1-second synchronization window for vCPUs 
created after the S4 resume.

> +			raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
>  		}
>  
>  	}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=15

Re: [PATCH v7 11/36] KVM: x86: Restructure kvm_guest_time_update() for TSC upscaling

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Critical] Uninitialized kernel_ns and host_tsc variables are used on 32-bit builds if use_master_clock is true.
- [High] The fallback clock path reads rdtsc() after preemption is re-enabled, causing mismatched TSC frequency calculations and guest clock corruption.
--

--- Patch [11]: [PATCH v7 11/36] KVM: x86: Restructure kvm_guest_time_update() for TSC upscaling ---
commit a9ced800a4cffa309e689174fd612acf127799a3
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Restructure kvm_guest_time_update() for TSC upscaling

This commit restructures kvm_guest_time_update to simplify the TSC catchup
adjustment by ensuring kernel_ns and host_tsc are always now during catchup,
then swapping in the master clock reference values afterward.

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 27f2f02bd5f40..faeb2d7b19a48 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -1776,45 +1776,60 @@ static void kvm_setup_guest_pvclock(struct pvclock_vcpu_time_info *ref_hv_clock,
>  int kvm_guest_time_update(struct kvm_vcpu *v)
>  {
[ ... ]
> -	kernel_ns = 0;
> -	host_tsc = 0;
> -
>  	/*
>  	 * If the host uses TSC clock, then passthrough TSC as stable
>  	 * to the guest.
>  	 */
>  	do {
>  		seq = read_seqcount_begin(&ka->pvclock_sc);
> +
>  		use_master_clock = ka->use_master_clock;
> +
> +		/*
> +		 * The TSC read and the call to get_cpu_tsc_khz() must happen
> +		 * on the same CPU.
> +		 */
> +		get_cpu();
> +
> +		tgt_tsc_hz = (u64)get_cpu_tsc_khz() * HZ_PER_KHZ;
> +
> +#ifdef CONFIG_X86_64
> +		if (use_master_clock &&
> +		    !kvm_get_time_and_clockread(&kernel_ns, &host_tsc) &&
> +		    !read_seqcount_retry(&ka->pvclock_sc, seq))
> +			use_master_clock = false;
> +#endif
> +
> +		put_cpu();
> +
> +		if (use_master_clock) {
> -			host_tsc = ka->master_cycle_now;
> -			kernel_ns = ka->master_kernel_ns;
> +			master_host_tsc = ka->master_cycle_now;
> +			master_kernel_ns = ka->master_kernel_ns;
> +		} else {
> +			local_irq_disable();
> +			host_tsc = rdtsc();

[Severity: High]
Because put_cpu() re-enables preemption, could the vCPU thread be preempted
and migrated to another physical CPU before local_irq_disable() and rdtsc()
are called in this fallback path?

If migration occurs here, host_tsc might be read on a different CPU than
where tgt_tsc_hz was calculated.

> +			kernel_ns = get_kvmclock_base_ns();
> +			local_irq_enable();
>  		}

[ ... ]

> @@ -1824,17 +1839,32 @@ int kvm_guest_time_update(struct kvm_vcpu *v)
>  	 *      entry to avoid unknown leaps of TSC even when running
>  	 *      again on the same CPU.  This may cause apparent elapsed
>  	 *      time to disappear, and the guest to stand still or run
> -	 *	very slowly.
> +	 *      very slowly.
>  	 */
>  	if (vcpu->tsc_catchup) {
> -		u64 tsc = compute_guest_tsc(v, kernel_ns);
> -		if (tsc > tsc_timestamp) {
> -			adjust_tsc_offset_guest(v, tsc - tsc_timestamp);
> -			tsc_timestamp = tsc;
> -		}
> +		s64 adjustment;
> +
> +		/*
> +		 * Calculate the delta between what the guest TSC *should* be
> +		 * and what it actually is according to kvm_read_l1_tsc().
> +		 */
> +		adjustment = compute_guest_tsc(v, kernel_ns) -
> +			     kvm_read_l1_tsc(v, host_tsc);

[Severity: Critical]
On 32-bit builds, will kernel_ns and host_tsc remain uninitialized when
use_master_clock is true?

The original 0-initializations for kernel_ns and host_tsc were removed by
this patch. Their new initialization via kvm_get_time_and_clockread() is
guarded by CONFIG_X86_64.

When vcpu->tsc_catchup is set on 32-bit builds, it seems this would pass
uninitialized stack variables to compute_guest_tsc() and kvm_read_l1_tsc()
for the adjustment calculation.

> +		if (adjustment > 0)
> +			adjust_tsc_offset_guest(v, adjustment);
>  	}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=11

Re: [PATCH v7 07/36] KVM: x86: Restructure get_kvmclock()

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Removal of `get_cpu()` reintroduces a race condition between `rdtsc` and `cpu_tsc_khz`, and triggers a kernel warning for preemptible `__this_cpu_read`.
--

--- Patch [7]: [PATCH v7 07/36] KVM: x86: Restructure get_kvmclock() ---
commit c5c131ac2510f7641714a694b1cf0192a9da9749
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Restructure get_kvmclock()

This commit wraps the use_master_clock block in an ifdef for CONFIG_X86_64
to resolve 32-bit build issues with unused variables and host_tsc_clocksource.
It also refactors the master-clock success path to use continue, allowing
the fallback computation to become the common tail.

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index ee115dc6df6e1..d68d00cdbea73 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
[ ... ]
> @@ -1636,34 +1636,38 @@ static unsigned long get_cpu_tsc_khz(void)
>  static void get_kvmclock(struct kvm *kvm, struct kvm_clock_data *data)
>  {
>  	struct kvm_arch *ka = &kvm->arch;
> -	struct pvclock_vcpu_time_info hv_clock;
>  	unsigned int seq;
>  
>  	do {
>  		seq = read_seqcount_begin(&ka->pvclock_sc);
>  
>  		data->flags = 0;
> -		if (ka->use_master_clock) {
>  #ifdef CONFIG_X86_64
> +		if (ka->use_master_clock) {
> +			struct pvclock_vcpu_time_info hv_clock;
>  			struct timespec64 ts;
>  
>  			if (kvm_get_walltime_and_clockread(&ts, &data->host_tsc)) {
>  				data->realtime = ts.tv_nsec + NSEC_PER_SEC * ts.tv_sec;
> -				data->flags |= KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC;
> -			} else
> -#endif
> -			data->host_tsc = rdtsc();
> -
> -			data->flags |= KVM_CLOCK_TSC_STABLE;
> -			hv_clock.tsc_timestamp = ka->master_cycle_now;
> -			hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
> -			kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
> -					   &hv_clock.tsc_shift,
> -					   &hv_clock.tsc_to_system_mul);
> +				data->flags |= KVM_CLOCK_REALTIME | KVM_CLOCK_HOST_TSC | KVM_CLOCK_TSC_STABLE;
> +
> +				hv_clock.tsc_timestamp = ka->master_cycle_now;
> +				hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
> +				kvm_get_time_scale(NSEC_PER_SEC, get_cpu_tsc_khz() * 1000LL,
> +						   &hv_clock.tsc_shift,
> +						   &hv_clock.tsc_to_system_mul);

[Severity: High]
Does this code trigger a preemptible __this_cpu_read() warning?

If the host lacks X86_FEATURE_CONSTANT_TSC, get_cpu_tsc_khz() will call
__this_cpu_read(cpu_tsc_khz). Since previous changes dropped the get_cpu()
pinning protection in get_kvmclock(), this read happens with preemption
enabled, which violates __this_cpu_read constraints and triggers the debug
warning.

Can this also result in using a mismatched TSC frequency if the thread is
preempted and migrated to a CPU with a different frequency while servicing
ioctl(KVM_GET_CLOCK)?

> +				data->clock = __pvclock_read_cycles(&hv_clock, data->host_tsc);
> +				continue;
> +			}
> +
> +			/*
> +			 * Clock read failed (e.g. clocksource is transitioning
> +			 * away from TSC). Fall back to the non-master-clock path
> +			 * rather than spinning.
> +			 */
>  		}
> +#endif
> +		data->clock = get_kvmclock_base_ns() + ka->kvmclock_offset;
>  	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
>  }

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=7

Re: [PATCH v7 20/36] KVM: x86/xen: Prevent runstate times from becoming negative

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [Medium] Cross-thread arithmetic on per-task `run_delay` leads to garbage `steal_ns` values and corrupts runstate accounting.
--

--- Patch [20]: [PATCH v7 20/36] KVM: x86/xen: Prevent runstate times from becoming negative ---
commit 1979f0260ec16f7c2af18f6f359a100b98ca0b72
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86/xen: Prevent runstate times from becoming negative

This commit handles situations where the KVM clock or run_delay goes backwards
by refraining from updating runstate times and clamping steal time. It adds
logic to prevent steal_ns from exceeding the total elapsed delta_ns.

> Also clamp steal_ns to delta_ns to prevent steal time from exceeding
> the total elapsed time, and handle negative steal_ns (which can happen
> if run_delay goes backwards across a scheduler update).

[Severity: Medium]
This is a pre-existing issue, but is the negative steal_ns actually caused by
run_delay going backwards, or is it caused by cross-thread arithmetic?

When kvm_xen_update_runstate() is called via ioctl (such as from
kvm_xen_vcpu_set_attr()), current evaluates to the ioctl/migration thread,
not the vCPU thread.

> diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
> index 694b31c1fcc9a..0670d5e50b883 100644
> --- a/arch/x86/kvm/xen.c
> +++ b/arch/x86/kvm/xen.c
> @@ -588,29 +588,45 @@ void kvm_xen_update_runstate(struct kvm_vcpu *v, int state)
>  {
>  	struct kvm_vcpu_xen *vx = &v->arch.xen;
>  	u64 now = get_kvmclock_ns(v->kvm);
> -	u64 delta_ns = now - vx->runstate_entry_time;
>  	u64 run_delay = current->sched_info.run_delay;
> +	s64 delta_ns = now - vx->runstate_entry_time;
> +	s64 steal_ns = run_delay - vx->last_steal;

[Severity: Medium]
This is a pre-existing issue, but does this cross-thread subtraction
corrupt the steal time calculation?

If the previous call was from the ioctl thread, vx->last_steal is seeded with
that thread's run_delay. When the vCPU thread later runs and executes this,
steal_ns becomes:

    steal_ns = VCPU_run_delay - monitor_run_delay

Since these are run_delay values from two completely different threads, the
result is garbage (often negative, or massively positive).

[ ... ]

> -	if (vx->current_runstate == RUNSTATE_running) {
> -		u64 steal_ns = run_delay - vx->last_steal;
> +	if (vx->current_runstate == RUNSTATE_running && steal_ns > 0) {
> +		if (steal_ns > delta_ns)
> +			steal_ns = delta_ns;

[Severity: Medium]
While this clamp prevents integer underflow/overflow, will a large positive
garbage steal_ns from the cross-thread subtraction above silently convert
100% of the elapsed delta_ns into stolen time?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=20

Re: [PATCH v7 03/36] KVM: x86: Activate master clock immediately on vCPU creation

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Concurrent executions of `kvm_update_masterclock()` result in the premature clearing of `KVM_REQ_MCLOCK_INPROGRESS`, breaking the masterclock lockstep guarantee and potentially causing guest time monotonicity violations.
--

--- Patch [3]: [PATCH v7 03/36] KVM: x86: Activate master clock immediately on vCPU creation ---
commit 18307085611864bcc1224b0b19ac499526c3034f
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Activate master clock immediately on vCPU creation

This commit calls kvm_update_masterclock() directly from
kvm_arch_vcpu_postcreate() to ensure the master clock is active immediately
after a vCPU is created. This allows KVM_GET_CLOCK to return a valid host_tsc
and realtime pair right away, avoiding the need for a dummy vCPU run.

> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -9385,6 +9385,8 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
>  		return;
>  	vcpu_load(vcpu);
>  	kvm_synchronize_tsc(vcpu, NULL);
> +	if (!vcpu->kvm->arch.use_master_clock)
> +		kvm_update_masterclock(vcpu->kvm);

[Severity: High]
This isn't a bug introduced by this patch, but can this new call trigger a
pre-existing race if multiple vCPUs are created concurrently?

Looking at how vCPU creation is handled, kvm_arch_vcpu_postcreate() executes
after kvm->lock is dropped. If multiple threads create vCPUs concurrently,
they can call kvm_update_masterclock() at the same time.

In kvm_start_pvclock_update(), the in-progress request is set before
acquiring the lock:

	kvm_make_mclock_inprogress_request(kvm);
	
	/* no guest entries from this point */
	__kvm_start_pvclock_update(kvm); // acquires tsc_write_lock

If Thread A sets the request and blocks on tsc_write_lock, and Thread B
finishes its update, Thread B will execute kvm_end_pvclock_update(), drop
the lock, and then clear the request unconditionally:

	raw_spin_unlock_irq(&ka->tsc_write_lock);
	kvm_for_each_vcpu(i, vcpu, kvm)
		kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);

	/* guest entries allowed */
	kvm_for_each_vcpu(i, vcpu, kvm)
		kvm_clear_request(KVM_REQ_MCLOCK_INPROGRESS, vcpu);

Would this clear KVM_REQ_MCLOCK_INPROGRESS while Thread A is still
waiting, prematurely breaking the lockstep guarantee and allowing vCPUs
to enter the guest with partially updated or stale clock data?

>  	vcpu_put(vcpu);
>  
>  	/* poll control enabled by default */

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=3

Re: [PATCH v7 22/36] KVM: x86: Remove runtime Xen TSC frequency CPUID update

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Critical] Unconditional removal of runtime Xen TSC CPUID updates breaks existing userspace (e.g., older QEMU versions) that relies on KVM to populate these fields.
- [High] The commit relies on non-existent IOCTLs (`KVM_GET_CLOCK_GUEST` and `KVM_VCPU_TSC_SCALE`) for userspace to populate the Xen TSC CPUID leaves.
--

--- Patch [22]: [PATCH v7 22/36] KVM: x86: Remove runtime Xen TSC frequency CPUID update ---
commit 127a72b774b2e5b2be60192682a2508bb1a3e37c
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Remove runtime Xen TSC frequency CPUID update

This commit removes the dynamic updating of the Xen TSC info CPUID leaf in
KVM, assuming that userspace can populate these fields using specific IOCTLs
at vCPU setup time. It also removes the associated helper functions in xen.h.

>   - KVM_GET_CLOCK_GUEST returns the pvclock_vcpu_time_info structure
>     containing tsc_to_system_mul and tsc_shift (Xen leaf index 1)
>   - KVM_VCPU_TSC_SCALE returns the effective TSC and bus
>     frequencies in kHz (Xen leaf index 2, and 0x40000010)
>   - KVM_VCPU_TSC_SCALE returns the raw hardware scaling ratio for
>     precise arithmetic (VMClock)

[Severity: High]
Are KVM_GET_CLOCK_GUEST and KVM_VCPU_TSC_SCALE actually present in the tree?

I cannot find these IOCTLs, and it doesn't appear that internal variables like
vcpu->arch.pvclock_tsc_mul are exported to userspace by any other mechanism.
Could the commit message be updated, or are there missing patches that
introduce these interfaces?

> diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
> index 8eabd68fa0a15..cd495bedf6c8e 100644
> --- a/arch/x86/kvm/cpuid.c
> +++ b/arch/x86/kvm/cpuid.c

[ ... ]

> @@ -2119,22 +2118,6 @@ bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx,
>  		} else if (function == 0x80000007) {
>  			if (kvm_hv_invtsc_suppressed(vcpu))
>  				*edx &= ~feature_bit(CONSTANT_TSC);
> -		} else if (IS_ENABLED(CONFIG_KVM_XEN) &&
> -			   kvm_xen_is_tsc_leaf(vcpu, function)) {
> -			/*
> -			 * Update guest TSC frequency information if necessary.
> -			 * Ignore failures, there is no sane value that can be
> -			 * provided if KVM can't get the TSC frequency.
> -			 */

[Severity: Critical]
Does unconditionally removing this dynamic Xen TSC CPUID update break older
userspace binaries (like older QEMU versions) that expect KVM to handle
populating these leaves?

Since older VMMs do not populate these leaves themselves, removing this could
result in Xen guests receiving zeroes or uninitialized data for TSC info,
leading to incorrect timekeeping or crashes.

Should this ABI change be gated behind a new capability (e.g.,
KVM_CAP_XEN_TSC_CPUID) so that legacy VMMs continue functioning while new VMMs
can opt-in to the new behavior?

> -			if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, vcpu))
> -				kvm_guest_time_update(vcpu);
> -
> -			if (index == 1) {
> -				*ecx = vcpu->arch.pvclock_tsc_mul;
> -				*edx = vcpu->arch.pvclock_tsc_shift;
> -			} else if (index == 2) {
> -				*eax = div_u64(vcpu->arch.hw_tsc_hz, HZ_PER_KHZ);
> -			}
>  		}
>  	} else {
>  		*eax = *ebx = *ecx = *edx = 0;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=22

Re: [PATCH v7 23/36] KVM: x86: Re-synchronize TSC after KVM_SET_TSC_KHZ

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] KVM_SET_TSC_KHZ unconditionally sets user_set_tsc = true during vCPU creation, breaking the 1-second slop hack workaround for live migrating young VMs.
- [High] Lockless TOCTOU race when synchronizing the guest TSC causes guest clock stalls or backwards jumps during preemption.
--

--- Patch [23]: [PATCH v7 23/36] KVM: x86: Re-synchronize TSC after KVM_SET_TSC_KHZ ---
commit 7a6fbf4fe1dbd0e60f9a3418fa5cc8be64f86841
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Re-synchronize TSC after KVM_SET_TSC_KHZ

KVM_SET_TSC_KHZ changes the vCPU's TSC scaling ratio but does not
update the VM-wide cur_tsc_scaling_ratio used by get_kvmclock().
This commit calls kvm_synchronize_tsc() after changing the TSC
frequency to ensure the TSC value is continuous and updates the scaling ratio.

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 1942ccadb7a50..57494812cc839 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c

[ ... ]

> @@ -1061,7 +1061,17 @@ static int kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz)
>  			 user_tsc_khz, thresh_lo, thresh_hi);
>  		use_scaling = 1;
>  	}
> -	return set_tsc_khz(vcpu, user_tsc_khz, use_scaling);
> +	/*
> +	 * Read the guest TSC before changing the ratio, so we can
> +	 * re-synchronize to preserve continuity across the change.
> +	 */
> +	tsc = kvm_read_l1_tsc(vcpu, rdtsc());

[Severity: High]
Can this lockless read cause guest clock stalls or backwards jumps?

If the thread is preempted between this lockless rdtsc() read and the 
lock acquisition in kvm_synchronize_tsc(), the delay is lost.

kvm_synchronize_tsc() takes a new rdtsc() reading under tsc_write_lock:

arch/x86/kvm/x86.c:__kvm_synchronize_tsc() {
    ...
    raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
    ...
    host_tsc = rdtsc();
    ...
}

Will this effectively stall the guest TSC for the duration of any preemption
delay, shifting it backwards relative to other vCPUs and the host clock?

> +
> +	if (set_tsc_khz(vcpu, user_tsc_khz, use_scaling))
> +		return -1;
> +
> +	kvm_synchronize_tsc(vcpu, &tsc);

[Severity: High]
Does passing a non-NULL pointer to kvm_synchronize_tsc() here inadvertently 
break the 1-second slop hack workaround for live migrating young VMs?

Since kvm_set_tsc_khz() is called unconditionally during vCPU creation via
kvm_arch_vcpu_create()->kvm_set_tsc_khz(), passing &tsc causes 
kvm_synchronize_tsc() to treat this as a user-initiated write and globally 
set user_set_tsc = true for every new VM:

arch/x86/kvm/x86.c:__kvm_synchronize_tsc() {
    ...
    if (user_set_tsc)
        vcpu->kvm->arch.user_set_tsc = true;
    ...
}

Would this defeat the flag's purpose, causing the 1-second slop hack to 
incorrectly trigger during migration and overwrite an explicitly restored 
guest TSC with a value synced to KVM's dummy creation time?

> +	return 0;
>  }
>  
>  static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=23

Re: [PATCH v7 24/36] KVM: x86: Use ktime_get_snapshot_id() for master clock

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 6 potential issue(s) to consider:
- [High] Mathematically incorrect usage of `ktime_mono_to_any()` with a RAW timestamp.
- [High] Cannot retrieve CLOCK_MONOTONIC using only the standard system_time_snapshot.
- [High] The patch silently breaks KVM masterclock support on Hyper-V hosts.
- [High] Missing validation for zero cycles in kvm_snapshot_has_tsc leads to a massive guest time jump and potential DoS.
- [Low] The patch introduces a build failure by calling a non-existent kernel API and accessing non-existent struct fields.
- [Low] Static helper functions were abandoned but not removed, breaking the build.
--

--- Patch [24]: [PATCH v7 24/36] KVM: x86: Use ktime_get_snapshot_id() for master clock ---
commit 08cee26ad4312fb3cda5c262811876db0f33c933
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Use ktime_get_snapshot_id() for master clock

This commit replaces the KVM-private timekeeping reimplementation with calls 
to a generic ktime_get_snapshot_id interface. It is intended as a step towards 
eliminating the pvclock_gtod_data private copy of timekeeping state.

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 57494812cc839..45a768fd7cb35 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c

[ ... ]

> @@ -1580,14 +1581,39 @@ static int do_realtime(struct timespec64 *ts, u64 *tsc_timestamp)

[Severity: Low]
The commit message mentions replacing do_kvmclock_base, do_monotonic, 
do_realtime, and vgettsc. Were these functions meant to be removed in this 
patch? Leaving them defined as static helper functions without any callers 
will break builds compiled with -Werror=unused-function.

>   * reports the TSC value from which it do so. Returns true if host is
>   * using TSC based clocksource.
>   */
> +static bool kvm_snapshot_has_tsc(struct system_time_snapshot *snap,
> +				u64 *tsc_timestamp)
> +{
> +	/*
> +	 * ktime_get_snapshot_id() cannot fail for standard clock IDs
> +	 * (only for invalid/aux clocks or during suspend, with a WARN).
> +	 */
> +	if (!snap->valid)

[Severity: Low]
Does the system_time_snapshot structure have a valid field? It appears this 
field, along with hw_csid and hw_cycles used below, might not exist in the 
mainline struct system_time_snapshot, which would cause a build failure.

> +		return false;
> +
> +	if (snap->cs_id == CSID_X86_TSC) {

[Severity: High]
Does this explicit check for CSID_X86_TSC exclude the previously supported 
Hyper-V clocksource? Since VDSO_CLOCKMODE_HVCLOCK defaults to CSID_GENERIC, 
it seems this might silently break KVM masterclock support for nested VMs 
running on Hyper-V hosts.

[Severity: High]
If the hardware read transiently fails (such as during host migration) and 
snap->cycles is 0, this block unconditionally returns true and passes 0 as the 
host TSC reference. Could this result in a massive leap in guest time and 
cause a timer storm that soft-locks or crashes the guest VM? The commit 
message mentions raw_cycles being zero means the clocksource could not provide 
a raw counter value, but it does not appear to be handled here.

> +		*tsc_timestamp = snap->cycles;
> +		return true;
> +	}
> +
> +	if (snap->hw_csid == CSID_X86_TSC && snap->hw_cycles) {
> +		*tsc_timestamp = snap->hw_cycles;
> +		return true;
> +	}
> +
> +	return false;
> +}
> +
>  static bool kvm_get_time_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
>  {
> -	/* checked again under seqlock below */
> -	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode))
> +	struct system_time_snapshot snap = {};
> +
> +	ktime_get_snapshot_id(CLOCK_MONOTONIC_RAW, &snap);

[Severity: Low]
Is ktime_get_snapshot_id available in the generic timekeeping code? Calling a 
non-existent API will result in a build failure.

> +	if (!kvm_snapshot_has_tsc(&snap, tsc_timestamp))
>  		return false;
>  
> -	return gtod_is_based_on_tsc(do_kvmclock_base(kernel_ns,
> -						     tsc_timestamp));
> +	*kernel_ns = ktime_to_ns(ktime_mono_to_any(snap.systime, TK_OFFS_BOOT));

[Severity: High]
Does passing a RAW timestamp (from CLOCK_MONOTONIC_RAW) to ktime_mono_to_any 
mathematically mix two different time domains? It looks like this adds the 
monotonic-to-boot offset to a raw monotonic timestamp, which could corrupt 
the guest masterclock base time.

Additionally, does snap.systime exist in struct system_time_snapshot, or is 
this another missing field that will break the build?

> +	return true;
>  }
>  
>  /*
> @@ -1596,12 +1622,14 @@ static bool kvm_get_time_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
>   */
>  bool kvm_get_monotonic_and_clockread(s64 *kernel_ns, u64 *tsc_timestamp)
>  {
> -	/* checked again under seqlock below */
> -	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode))
> +	struct system_time_snapshot snap = {};
> +
> +	ktime_get_snapshot_id(CLOCK_MONOTONIC, &snap);
> +	if (!kvm_snapshot_has_tsc(&snap, tsc_timestamp))
>  		return false;
>  
> -	return gtod_is_based_on_tsc(do_monotonic(kernel_ns,
> -						 tsc_timestamp));
> +	*kernel_ns = ktime_to_ns(snap.systime);

[Severity: High]
Can CLOCK_MONOTONIC time actually be retrieved using only the standard 
system_time_snapshot? The standard struct captures real, boot, and raw times, 
but lacks the timekeeper offsets needed to properly compute monotonic time. 
KVM guest timekeeping requests might return corrupt data if relying solely on 
this structure without proper offsets.

> +	return true;
>  }

[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=24

Re: [PATCH v7 34/36] KVM: selftests: Add master clock offset test

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Medium] The test uses `__vcpu_ioctl` to query `KVM_GET_CLOCK_GUEST` but ignores its return value, potentially leading to the use of uninitialized stack memory.
- [Medium] The test's verification that the clock advanced by 1 hour is ineffective on machines with an uptime greater than 1 hour.
- [Medium] All vCPUs register the exact same guest physical address for their pvclock_vcpu_time_info structures.
--

--- Patch [34]: [PATCH v7 34/36] KVM: selftests: Add master clock offset test ---
commit 52f3f310d696d962b9db181f0b7e2661011f0cb2
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: selftests: Add master clock offset test

Verify that KVM master clock mode remains active when vCPUs have
different TSC offsets but the same frequency. Creates three vCPUs,
sets one to a different TSC value, and confirms KVM_CLOCK_HOST_TSC
and KVM_CLOCK_TSC_STABLE are set.

> diff --git a/tools/testing/selftests/kvm/x86/masterclock_offset_test.c b/tools/testing/selftests/kvm/x86/masterclock_offset_test.c
> new file mode 100644
> index 0000000000000..88e2bd2edab51
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/x86/masterclock_offset_test.c

[ ... ]

> +static void guest_code(void)
> +{
> +	wrmsr(MSR_KVM_SYSTEM_TIME_NEW, KVMCLOCK_GPA | KVM_MSR_ENABLED);

[Severity: Medium]
Does this code instruct KVM to write to the identical GPA for all vCPUs?
Since guest_code() unconditionally hardcodes KVMCLOCK_GPA, KVM will
concurrently overwrite the same memory area with different vCPUs' time
information. Is this API contract violation intended?

> +	for (;;)
> +		GUEST_SYNC(0);
> +}

[ ... ]

> +	/* Get per-vCPU pvclock in order 0, 2, 1 */
> +	int order[] = {0, 2, 1};
> +	for (i = 0; i < 3; i++) {
> +		int idx = order[i];
> +		__vcpu_ioctl(vcpus[idx], KVM_GET_CLOCK_GUEST, &pvti[idx]);

[Severity: Medium]
Could this lead to the use of uninitialized stack memory? The return value
of __vcpu_ioctl() is ignored, so if KVM_GET_CLOCK_GUEST fails or is
unsupported on the host kernel, pvti[idx] will remain uninitialized.

> +		pr_info("vCPU %d: tsc_timestamp=%lu system_time=%lu "

[ ... ]

> +	/* Re-read pvclocks */
> +	for (i = 0; i < 3; i++)
> +		__vcpu_ioctl(vcpus[order[i]], KVM_GET_CLOCK_GUEST, &pvti[order[i]]);

[Severity: Medium]
Does this also ignore the return value of __vcpu_ioctl() when re-reading
pvclocks?

> +
> +	pr_info("After +1h: vCPU 0 system_time=%lu, vCPU 2 system_time=%lu\n",

[ ... ]

> +	/* Verify the clock actually moved by ~1 hour */
> +	TEST_ASSERT(clk0 > ONE_HOUR_NS,
> +		    "Clock should be > 1 hour after set, got %lu ns",
> +		    (unsigned long)clk0);

[Severity: Medium]
Will this assertion trivially pass on any machine with an uptime greater
than 1 hour? The test validates the absolute clock value rather than the
delta (for example, clk0 >= clk0_before + ONE_HOUR_NS). If KVM_SET_CLOCK
completely fails to advance the clock, wouldn't the assertion still pass
on hosts with sufficient uptime?

> +
> +	pr_info("PASSED: pvclock still consistent after KVM_SET_CLOCK +1h\n");
> +	kvm_vm_free(vm);
> +	return 0;
> +}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=34

Re: [PATCH v7 21/36] KVM: x86: Avoid redundant masterclock updates from multiple vCPUs

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Moving O(N) VM-wide vCPU iterations inside a raw spinlock critical section and before write_seqcount_end() causes severe hardirq latency and prolongs reader spinning.
--

--- Patch [21]: [PATCH v7 21/36] KVM: x86: Avoid redundant masterclock updates from multiple vCPUs ---
commit 47fb88fca997575b4513fe25e0a0202e7a2e0b1b
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Avoid redundant masterclock updates from multiple vCPUs

This patch optimizes masterclock updates by preventing multiple vCPUs from
redundantly executing the update sequence. It introduces a check in
__kvm_start_pvclock_update() to bail out if another vCPU has already
processed the request.

> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
[ ... ]
> @@ -1710,10 +1710,39 @@ static void kvm_make_mclock_inprogress_request(struct kvm *kvm)
>  	kvm_make_all_cpus_request(kvm, KVM_REQ_MCLOCK_INPROGRESS);
>  }
>  
> -static void __kvm_start_pvclock_update(struct kvm *kvm)
> +static void kvm_clear_mclock_inprogress_request(struct kvm *kvm)
>  {
> +	struct kvm_vcpu *vcpu;
> +	unsigned long i;
> +
> +	kvm_for_each_vcpu(i, vcpu, kvm)
> +		kvm_clear_request(KVM_REQ_MCLOCK_INPROGRESS, vcpu);
> +}
> +
> +static bool __kvm_start_pvclock_update(struct kvm *kvm, struct kvm_vcpu *requesting_vcpu)
> +{
> +	struct kvm_vcpu *vcpu;
> +	unsigned long i;
> +
>  	raw_spin_lock_irq(&kvm->arch.tsc_write_lock);
> +
> +	/*
> +	 * If another vCPU already did the update while we were waiting
> +	 * for the lock, our request will have been cleared. Bail out.
> +	 */
> +	if (requesting_vcpu &&
> +	    !kvm_test_request(KVM_REQ_MASTERCLOCK_UPDATE, requesting_vcpu)) {
> +		kvm_clear_mclock_inprogress_request(kvm);
> +		raw_spin_unlock_irq(&kvm->arch.tsc_write_lock);
> +		return false;
> +	}
> +
> +	/* The update is VM-wide; prevent other vCPUs from redoing it. */
> +	kvm_for_each_vcpu(i, vcpu, kvm)
> +		kvm_clear_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);

[Severity: High]
Will this O(N) loop cause hardirq latency issues on large VMs?

By moving the kvm_for_each_vcpu() loop inside the raw_spin_lock_irq()
critical section, a VM with hundreds or thousands of vCPUs will execute
many atomic bit operations with interrupts disabled.

> +
>  	write_seqcount_begin(&kvm->arch.pvclock_sc);
> +	return true;
>  }
[ ... ]
> @@ -1730,22 +1759,25 @@ static void kvm_end_pvclock_update(struct kvm *kvm)
>  	struct kvm_vcpu *vcpu;
>  	unsigned long i;
>  
> -	write_seqcount_end(&ka->pvclock_sc);
> -	raw_spin_unlock_irq(&ka->tsc_write_lock);
>  	kvm_for_each_vcpu(i, vcpu, kvm)
>  		kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
>  
>  	/* guest entries allowed */
> -	kvm_for_each_vcpu(i, vcpu, kvm)
> -		kvm_clear_request(KVM_REQ_MCLOCK_INPROGRESS, vcpu);
> +	kvm_clear_mclock_inprogress_request(kvm);
> +
> +	write_seqcount_end(&ka->pvclock_sc);
> +	raw_spin_unlock_irq(&ka->tsc_write_lock);
>  }

[Severity: High]
Does moving the seqcount and lock release to the end of the function
prolong the critical section too much?

The O(N) vCPU iteration loops are now happening before
write_seqcount_end() and before releasing the tsc_write_lock. This
substantially increases the IRQ-disabled critical section length.

Furthermore, won't holding the seqcount write lock across these loops force
reader vCPUs in kvm_guest_time_update() to spin indefinitely, wasting CPU
cycles and exacerbating latency?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=21

Re: [PATCH v7 35/36] KVM: selftests: Add Xen/generic CPUID timing leaf test

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Medium] The TSC scale ratio verification test will spuriously fail if the host TSC frequency is within KVM's 250 ppm tolerance of a target frequency.
- [Medium] Unsafe `realloc` pattern overwrites the original pointer, leading to a memory leak and immediate NULL pointer dereference on allocation failure.
- [Low] Commit message typo: duplicates 'KVM_VCPU_TSC_SCALE'.
--

--- Patch [35]: [PATCH v7 35/36] KVM: selftests: Add Xen/generic CPUID timing leaf test ---
commit f482c86f3dcfdbeb8ea33ae05535bd28d7cd5656
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: selftests: Add Xen/generic CPUID timing leaf test

This commit adds a test to verify that userspace can correctly populate Xen
and generic CPUID timing leaves. It validates this using native and scaled
TSC frequencies.

> Verify that userspace can correctly populate Xen and generic CPUID
> timing leaves using the KVM_VCPU_TSC_SCALE and
> KVM_VCPU_TSC_SCALE attributes.

[Severity: Low]
This isn't a bug, but there's a typo in the commit message where
"KVM_VCPU_TSC_SCALE" is duplicated instead of mentioning both
KVM_GET_TSC_KHZ and KVM_VCPU_TSC_SCALE.

> diff --git a/tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c b/tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c
> new file mode 100644
> index 0000000000000..2098cb511ef02
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/x86/xen_cpuid_timing_test.c

[ ... ]

> +static void add_cpuid_entry(struct kvm_vcpu *vcpu, uint32_t function,
> +			    uint32_t index, uint32_t eax, uint32_t ebx,
> +			    uint32_t ecx, uint32_t edx)
> +{
> +	struct kvm_cpuid2 *cpuid = vcpu->cpuid;
> +	struct kvm_cpuid_entry2 *entry;
> +	int n = cpuid->nent;
> +
> +	vcpu->cpuid = realloc(vcpu->cpuid,
> +			      sizeof(*cpuid) + (n + 1) * sizeof(*entry));
> +	cpuid = vcpu->cpuid;
> +	cpuid->nent = n + 1;

[Severity: Medium]
Will this cause a memory leak and immediate NULL pointer dereference if
realloc() fails?

If realloc() returns NULL due to memory exhaustion, the original pointer in
vcpu->cpuid is overwritten, leaking the memory. Then cpuid->nent = n + 1
will immediately dereference that NULL pointer.

[ ... ]

> +static void run_test(uint64_t tsc_khz)
> +{

[ ... ]

> +	effective_tsc_khz = __vcpu_ioctl(vcpu, KVM_GET_TSC_KHZ, NULL);
> +	bus_cycle_ns = vm_check_cap(vm, KVM_CAP_X86_APIC_BUS_CYCLES_NS);
> +	effective_bus_khz = bus_cycle_ns > 0 ? 1000000 / bus_cycle_ns : 1000000;
> +
> +	/* If scaling wasn't applied, skip this frequency */
> +	if (tsc_khz && effective_tsc_khz == host_khz) {

[Severity: Medium]
Could this check fail to skip properly if the requested frequency is within 
KVM's 250 ppm tolerance of the host TSC? 

If the target frequency is close to the host frequency (within tolerance), 
KVM disables TSC scaling (setting the ratio to 1.0) but still returns the 
requested frequency in effective_tsc_khz. Since effective_tsc_khz differs
from host_khz, this check evaluates to false even though scaling wasn't 
actually applied.

> +		pr_info("  TSC scaling not available, skipping\n");
> +		kvm_vm_free(vm);
> +		return;
> +	}

[ ... ]

> +			if (tsc_khz) {
> +				uint64_t computed = ((__uint128_t)host_khz * scale.ratio) >> scale.frac_bits;
> +				int64_t diff = (int64_t)computed - (int64_t)effective_tsc_khz;
> +
> +				TEST_ASSERT(diff >= -1 && diff <= 1,
> +					    "TSC_SCALE ratio mismatch: computed %lu vs effective %u (diff %ld)",
> +					    computed, effective_tsc_khz, diff);

[Severity: Medium]
Does this cause a spurious test failure due to the unskipped ppm tolerance 
case above?

If scaling wasn't applied but the test didn't skip (because the ratio is 1.0), 
computed will equal host_khz. The assertion will then check if 
host_khz is within 1 kHz of effective_tsc_khz. If the difference 
between them was just large enough (e.g., 100 kHz) but still within KVM's 
ppm tolerance, this assertion will fail.

> +			}
> +		}
> +	}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=35

Re: [PATCH v7 27/36] KVM: x86: Remove pvclock_gtod_data and private timekeeping code

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] KVM references non-existent timekeeping functions and struct fields.
--

--- Patch [27]: [PATCH v7 27/36] KVM: x86: Remove pvclock_gtod_data and private timekeeping code ---
commit f5e01c2dbc04eb5669e9c80660aff5b3897195fa
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Remove pvclock_gtod_data and private timekeeping code
    
Remove the now-unused KVM-private timekeeping infrastructure:
    
 - struct pvclock_clock and struct pvclock_gtod_data
 - update_pvclock_gtod() and its seqcount-protected state copy
 - read_tsc() (KVM's private TSC reader with cycle_last clamping)
 - vgettsc() (KVM's private clocksource interpolation)
 - do_kvmclock_base(), do_monotonic(), do_realtime()

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 3f660bdea8a28..26d2f24aceec5 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
[ ... ]
> @@ -1455,128 +1403,6 @@ void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
>  
>  #ifdef CONFIG_X86_64
>  
> -static u64 read_tsc(void)
> -{
[ ... ]
> -static int do_realtime(struct timespec64 *ts, u64 *tsc_timestamp)
> -{
[ ... ]
> -	return mode;
> -}
> -
>  /*
>   * Calculates the kvmclock_base_ns (CLOCK_MONOTONIC_RAW + boot time) and
>   * reports the TSC value from which it do so. Returns true if host is

[Severity: Low]
Are these timekeeping functions and struct fields defined elsewhere?

With the removal of the private timekeeping code, the remaining functions
here seem to rely on undefined interfaces, which could cause a build failure.

Specifically, kvm_get_time_and_clockread() calls ktime_get_snapshot_id(),
which does not appear to be defined in the tree:

arch/x86/kvm/x86.c:kvm_get_time_and_clockread() {
    ...
    struct system_time_snapshot snap = {};

    ktime_get_snapshot_id(CLOCK_MONOTONIC_RAW, &snap);
    ...
    *kernel_ns = ktime_to_ns(ktime_mono_to_any(snap.systime, TK_OFFS_BOOT));
    ...
}

Additionally, kvm_snapshot_has_tsc() accesses several fields in
struct system_time_snapshot that are not defined, such as valid, hw_csid,
hw_cycles, and systime:

arch/x86/kvm/x86.c:kvm_snapshot_has_tsc() {
    ...
    if (!snap->valid)
        return false;

    if (snap->cs_id == CSID_X86_TSC) {
        *tsc_timestamp = snap->cycles;
        return true;
    }

    if (snap->hw_csid == CSID_X86_TSC && snap->hw_cycles) {
        *tsc_timestamp = snap->hw_cycles;
        return true;
    }
    ...
}

Could this lead to compilation errors?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=27

Re: [PATCH v7 26/36] KVM: x86: Cache host vclock_mode for masterclock eligibility checks

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] The patch leaves behind unused static functions (`do_kvmclock_base`, `do_monotonic`, `do_realtime`, `read_tsc`, `vgettsc`) and a useless data structure update (`update_pvclock_gtod` updating `pvclock_gtod_data`). This causes a build failure under `CONFIG_WERROR` due to `-Wunused-function` and introduces unnecessary performance overhead on every timekeeper tick.
- [Medium] Lockless accesses to `kvm_host_vclock_mode` lack `READ_ONCE()` and `WRITE_ONCE()`, which can lead to compiler-optimized double-loads and spurious state transitions.
--

--- Patch [26]: [PATCH v7 26/36] KVM: x86: Cache host vclock_mode for masterclock eligibility checks ---
commit d71eb6f562c183153e68671d8422238c00275229
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Cache host vclock_mode for masterclock eligibility checks
    
This commit changes KVM to cache the host clocksource mode in a new
kvm_host_vclock_mode variable. It removes the remaining readers of
pvclock_gtod_data, opting to use gtod_is_based_on_tsc() with the cached
value instead.

> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 32f0550c5c0dd..3f660bdea8a28 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c

[ ... ]

> @@ -1155,7 +1156,7 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu, bool update_mclock)
>  	 * accounts for its offset.
>  	 */
>  	bool use_master_clock = kvm_use_master_clock(vcpu->kvm) &&
> -				gtod_is_based_on_tsc(gtod->clock.vclock_mode);
> +				gtod_is_based_on_tsc(kvm_host_vclock_mode);

[Severity: Medium]
Should this lockless read of kvm_host_vclock_mode use READ_ONCE()?

Because gtod_is_based_on_tsc() is inline and evaluates the mode multiple
times:

	return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK;

If the compiler inlines the function and reads the global variable twice,
could a concurrent update during a clocksource change cause both checks
to evaluate to false?

This could cause the code to spuriously drop masterclock usage.

[ ... ]

> @@ -7055,12 +7055,15 @@ static int pvclock_gtod_notify(struct notifier_block *nb, unsigned long unused,
>  	update_pvclock_gtod(tk);

[Severity: High]
Does this commit leave behind unused static functions?

With pvclock_gtod_data no longer being read by KVM, it appears
update_pvclock_gtod() is now updating a useless data structure on every
timekeeper tick, which adds unnecessary overhead.

Additionally, does this leave behind static functions like do_kvmclock_base(),
do_monotonic(), do_realtime(), read_tsc(), and vgettsc() which are no longer
referenced?

Could this cause a build failure due to -Wunused-function when compiling with
CONFIG_WERROR?

>  
>  #ifdef CONFIG_X86_64
> +	kvm_host_vclock_mode =
> +		tk->tkr_mono.clock->vdso_clock_mode;

[Severity: Medium]
Should this update to kvm_host_vclock_mode use WRITE_ONCE()?

Since readers access this global variable locklessly, missing WRITE_ONCE()
could lead to compiler-optimized tearing and trigger KCSAN data race warnings.

> +
>  	/*
>  	 * Disable master clock if host does not trust, or does not use,
>  	 * TSC based clocksource. Delegate queue_work() to irq_work as
>  	 * this is invoked with tk_core.seq write held.
>  	 */
> -	if (!gtod_is_based_on_tsc(pvclock_gtod_data.clock.vclock_mode) &&
> +	if (!gtod_is_based_on_tsc(kvm_host_vclock_mode) &&
>  	    atomic_read(&kvm_guest_has_master_clock) != 0)
>  		irq_work_queue(&pvclock_irq_work);
>  #endif

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=26

Re: [PATCH v7 32/36] KVM: x86: Add KVM_VCPU_TSC_SCALE and fix the documentation on TSC migration

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Medium] The documented algorithm for TSC migration calculates the destination TSC incorrectly by omitting a unit conversion factor.
- [Medium] The exemplar test contradicts the documented procedure for setting guest TSC frequency.
--

--- Patch [32]: [PATCH v7 32/36] KVM: x86: Add KVM_VCPU_TSC_SCALE and fix the documentation on TSC migration ---
commit 24bf59a7caece6b1df9bc880e92f05672eb883ff
Author: David Woodhouse <dwmw@amazon.co.uk>
KVM: x86: Add KVM_VCPU_TSC_SCALE and fix the documentation on TSC migration

This commit adds KVM_VCPU_TSC_SCALE to extract the actual scale ratio and
frac_bits, documents the process that userspace needs to follow to preserve
the TSC across migration, and adds an exemplar selftest.

> diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst
> index 66e714f2fcfa7..2b8ab8995079c 100644
> --- a/Documentation/virt/kvm/devices/vcpu.rst
> +++ b/Documentation/virt/kvm/devices/vcpu.rst
[ ... ]
> +From the destination VMM process:
> +
> +4. Before creating the vCPUs, invoke the KVM_SET_TSC_KHZ ioctl on the VM, to
> +   set the scaled frequency of the guest's TSC (freq).
> +
> +5. Invoke the KVM_GET_CLOCK ioctl to record the host TSC (host_tsc_dst) and
> +   host CLOCK_REALTIME nanoseconds (time_dst) at a given moment (Tdst).
> +
> +6. Calculate the number of nanoseconds elapsed between Tsrc and Tdst:
> +
> +   ΔT = time_dst - time_src
> +
> +7. As each vCPU[i] is created:
> +
> +   a. Read the KVM_VCPU_TSC_SCALE attribute to record the guest TSC scaling
> +      ratio (ratio_dst[i], frac_bits_dst[i]).
> +
> +   b. Calculate the intended guest TSC value at time Tdst:
> +
> +      tsc_dst[i] = tsc_src[i] + (ΔT * freq[i])

[Severity: Medium]
Does this formula need a unit conversion factor? If ΔT is in nanoseconds and
freq is in kHz, multiplying them directly yields a result that is off by a
factor of 1,000,000.

The new test performs this calculation with the division, which appears
correct:
tsc_dst = tsc_src + (uint64_t)((int64_t)freq_khz * delta_t / 1000000LL);

> diff --git a/tools/testing/selftests/kvm/x86/pvclock_migration_test.c b/tools/testing/selftests/kvm/x86/pvclock_migration_test.c
> new file mode 100644
> index 0000000000000..3b675827aec34
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/x86/pvclock_migration_test.c
[ ... ]
> +	/* === DESTINATION SIDE === */
> +	pr_info("=== Destination VM ===\n");
> +	vm = create_vm(&vcpu);
> +
> +	/* Step 4: KVM_SET_TSC_KHZ */
> +	vcpu_ioctl(vcpu, KVM_SET_TSC_KHZ, (void *)(unsigned long)freq_khz);

[Severity: Medium]
Is the documentation correct that KVM_SET_TSC_KHZ should be invoked on the
VM before creating vCPUs?

The code here invokes KVM_SET_TSC_KHZ on the vCPU after creating it, which
contradicts step 4 of the documented procedure above.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=32

Re: [PATCH v7 28/36] KVM: x86: Activate master clock from kvm_arch_init_vm()

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] Incorrect masterclock scaling ratio and stale state initialization in `kvm_arch_init_vm()`.
- [High] Unconditional setting of `user_set_tsc = true` at vCPU creation breaks 1-second TSC slop protection.
--

--- Patch [28]: [PATCH v7 28/36] KVM: x86: Activate master clock from kvm_arch_init_vm() ---
commit c68bcfc5acfe3bb9dda51b0de8e297101615b7d5
Author: David Woodhouse <dwmw@amazon.co.uk>

KVM: x86: Activate master clock from kvm_arch_init_vm()

Initialize the TSC generation and master clock state at VM creation
time, rather than relying on kvm_update_masterclock() from
kvm_arch_vcpu_postcreate().

> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -9407,8 +9407,6 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
>  		return;
>  	vcpu_load(vcpu);
>  	kvm_synchronize_tsc(vcpu, NULL);

[Severity: High]
A previous patch in this series modified kvm_set_tsc_khz() to unconditionally
call kvm_synchronize_tsc(vcpu, &tsc) with a non-NULL pointer during vCPU
initialization.

Does this cause __kvm_synchronize_tsc() to unconditionally set
kvm->arch.user_set_tsc = true globally for the VM when the very first vCPU
is created?

If user_set_tsc is set immediately at boot, does this break the 1-second TSC
slop protection for newly restored VMs, potentially leading to timekeeping
corruption and TSC jumps during live migration of young VMs?

> -	if (!vcpu->kvm->arch.use_master_clock)
> -		kvm_update_masterclock(vcpu->kvm, NULL);

[Severity: High]
By removing this synchronous update, are we deferring the
master_tsc_scaling_ratio updates to KVM_RUN? 

If so, does this leave early KVM_GET_CLOCK requests with a stale ratio?

>  	vcpu_put(vcpu);

[ ... ]

> @@ -9849,18 +9849,47 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
[ ... ]
>  	kvm->arch.default_tsc_khz = max_tsc_khz ? : tsc_khz;
>  	kvm->arch.apic_bus_cycle_ns = APIC_BUS_CYCLE_NS_DEFAULT;
>  	kvm->arch.guest_can_read_msr_platform_info = true;
>  	kvm->arch.enable_pmu = enable_pmu && !kvm->arch.has_protected_pmu;
>  
> +	kvm->arch.all_vcpus_matched_freq = true;
> +	kvm->arch.all_vcpus_matched_tsc = true;
> +	kvm->arch.cur_tsc_scaling_ratio = kvm_caps.default_tsc_scaling_ratio;
> +	kvm->arch.cur_tsc_khz = kvm->arch.default_tsc_khz;

[Severity: High]
Here we initialize cur_tsc_khz to default_tsc_khz, which might be scaled
if max_tsc_khz is configured on the host.

> +
> +	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
[ ... ]
> +	kvm->arch.cur_tsc_write = 0;
> +	kvm->arch.cur_tsc_offset = -(s64)kvmclock_host_tsc;

[Severity: High]
However, cur_tsc_offset is set to the unscaled -(s64)kvmclock_host_tsc here.

When the first vCPU is created, kvm_synchronize_tsc() sees
virtual_tsc_khz == cur_tsc_khz. Will it then erroneously apply this unscaled
offset to a vCPU using a scaled multiplier, since we bypass the scaling that
kvm_compute_l1_tsc_offset() would have provided?

Could this lead to a large guest TSC jump at boot and cause timekeeping
corruption?

> +	kvm->arch.cur_tsc_nsec = kvmclock_ns;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260728144954.355376-1-dwmw2@infradead.org?part=28