From: sashiko-bot@kernel.org
To: "Sean Christopherson" <seanjc@google.com>
Cc: linux-hyperv@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH v6 06/51] x86/sev: Don't override CPU frequency calibration for SNP's Secure TSC
Date: Thu, 06 Aug 2026 23:55:35 +0000 [thread overview]
Message-ID: <20260806235536.2F41A1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260806233609.212337-7-seanjc@google.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] The patch attempts to decouple CPU frequency from Secure TSC frequency for SNP guests, but a downstream core x86 check defeats this logic if the frequencies differ by more than 10%.
--
--- Patch [6]: [PATCH v6 06/51] x86/sev: Don't override CPU frequency calibration for SNP's Secure TSC ---
commit fde9a60ee57bc9ae26f0e19e9b9a2405fdf1fe11
Author: Sean Christopherson <seanjc@google.com>
x86/sev: Don't override CPU frequency calibration for SNP's Secure TSC
This commit removes the override of the kernel's CPU frequency calibration
routine for SNP guests with Secure TSC. It aims to allow the CPU frequency
to be calibrated independently of the TSC frequency.
> diff --git a/arch/x86/coco/sev/core.c b/arch/x86/coco/sev/core.c
> index ed0ac52a765e0..665de1aea0ee9 100644
> --- a/arch/x86/coco/sev/core.c
> +++ b/arch/x86/coco/sev/core.c
> @@ -2046,7 +2046,6 @@ void __init snp_secure_tsc_init(void)
>
> snp_tsc_freq_khz = SNP_SCALE_TSC_FREQ(tsc_freq_mhz * 1000, secrets->tsc_factor);
>
> - x86_platform.calibrate_cpu = securetsc_get_tsc_khz;
[Severity: Medium]
Does this actually decouple the frequencies if they differ significantly?
If the independent CPU calibration determines a frequency that differs from
the Secure TSC frequency by more than 10%, the core x86 code will still
overwrite it.
Looking at determine_cpu_tsc_frequencies() in arch/x86/kernel/tsc.c:
if (cpu_khz == 0)
cpu_khz = tsc_khz;
else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
cpu_khz = tsc_khz;
Will this downstream sanity check silently clamp cpu_khz back to tsc_khz
anyway, defeating the patch's attempt to keep them separate when APERF/MPERF
values diverge?
> x86_platform.calibrate_tsc = securetsc_get_tsc_khz;
>
> early_memunmap(mem, PAGE_SIZE);
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260806233609.212337-1-seanjc@google.com?part=6
next prev parent reply other threads:[~2026-08-06 23:55 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 23:35 [PATCH v6 00/51] x86: Try to wrangle PV clocks vs. TSC Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 01/51] x86/apic: Provide helpers to set local APIC timer frequency in hz and khz Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 02/51] x86/apic: Add CONFIG_X86_LOCAL_APIC=n stubs for APIC timer frequency APIs Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 03/51] x86/tsc: Ensure that TSC recalibration doesn't run if TSC frequency is known Sean Christopherson
2026-08-06 23:55 ` sashiko-bot
2026-08-06 23:35 ` [PATCH v6 04/51] x86/tsc: Restrict recalibrate_cpu_khz() export to p4-clockmod and powernow-k7 Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 05/51] x86/sev: Mark TSC as reliable when configuring Secure TSC Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 06/51] x86/sev: Don't override CPU frequency calibration for SNP's " Sean Christopherson
2026-08-06 23:55 ` sashiko-bot [this message]
2026-08-06 23:35 ` [PATCH v6 07/51] x86/sev: Move check for SNP Secure TSC support to tsc_early_init() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 08/51] x86/sev: Shove SNP's secure/trusted TSC frequency directly into "calibration" Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 09/51] x86/tsc: Add a standalone helper for getting TSC info from CPUID.0x15 Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 10/51] x86/tdx: Force TSC frequency with CPUID-based info provided by the TDX-Module Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 11/51] x86/tsc: Add dedicated hypervisor hooks for getting known TSC/CPU frequencies Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 12/51] x86/acrn: Register TSC/CPU frequency callbacks iff frequency is actually in CPUID Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 13/51] x86/acrn: Mark TSC frequency as known when using ACRN for calibration Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 14/51] x86/tsc: Consolidate forcing of X86_FEATURE_TSC_KNOWN_FREQ for PV code Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 15/51] x86/tsc: Kill off x86_platform_ops.calibrate_{cpu,tsc}() hooks Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 16/51] x86/tsc: Rename pit_hpet_ptimer_calibrate_cpu() => native_calibrate_cpu_late() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 17/51] x86/tsc: Fold native_calibrate_cpu() into recalibrate_cpu_khz() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 18/51] x86/kvmclock: Rename kvm_get_tsc_khz() to kvmclock_get_tsc_khz() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 19/51] x86/kvmclock: Drop dead check on TSC being unstable during kvmclock_init() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 20/51] KVM: x86: Officially define CPUID 0x40000010 as PV Timing Info (TSC and Bus) Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 21/51] x86/kvm: Obtain TSC frequency from PV CPUID if present Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 22/51] x86/kvm: Mark TSC as reliable when it's constant and nonstop Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 23/51] x86/tsc: Add standalone helper for getting CPU frequency from CPUID Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 24/51] x86/kvm: Get CPU base frequency from CPUID when it's available Sean Christopherson
2026-08-07 0:04 ` sashiko-bot
2026-08-06 23:35 ` [PATCH v6 25/51] clocksource: hyper-v: Register sched_clock save/restore iff it's necessary Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 26/51] clocksource: hyper-v: Drop wrappers to sched_clock save/restore helpers Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 27/51] clocksource: hyper-v: Don't save/restore TSC offset when using HV sched_clock Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 28/51] x86/kvmclock: Setup kvmclock for secondary CPUs iff CONFIG_SMP=y Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 29/51] x86/kvm: Don't disable kvmclock on BSP in syscore_suspend() Sean Christopherson
2026-08-07 0:04 ` sashiko-bot
2026-08-06 23:35 ` [PATCH v6 30/51] x86/paravirt: Remove unnecessary PARAVIRT=n stub for paravirt_set_sched_clock() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 31/51] x86/paravirt: Move handling of unstable PV clocks into paravirt_set_sched_clock() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 32/51] x86/kvmclock: Move sched_clock save/restore helpers up in kvmclock.c Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 33/51] x86/xen/time: NOP-ify x86_platform's sched_clock save/restore hooks Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 34/51] x86/vmware: NOP-ify save/restore hooks when using VMware's sched_clock Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 35/51] x86/tsc: WARN if TSC sched_clock save/restore used with PV sched_clock Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 36/51] x86/paravirt: Pass sched_clock save/restore helpers during registration Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 37/51] x86/kvmclock: Move kvm_sched_clock_init() down in kvmclock.c Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 38/51] x86/xen/time: Mark xen_setup_vsyscall_time_info() as __init Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 39/51] x86/pvclock: Mark setup helpers and related various as __init/__ro_after_init Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 40/51] x86/pvclock: WARN if pvclock's valid_flags are overwritten Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 41/51] x86/kvmclock: Refactor handling of PVCLOCK_TSC_STABLE_BIT during kvmclock_init() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 42/51] timekeeping: Resume clocksources before reading persistent clock Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 43/51] x86/kvmclock: Hook clocksource.suspend/resume when kvmclock isn't sched_clock Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 44/51] x86/kvmclock: WARN if wall clock is read while kvmclock is suspended Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 45/51] x86/paravirt: Mark __paravirt_set_sched_clock() as __init Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 46/51] x86/paravirt: Plumb a return code into __paravirt_set_sched_clock() Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 47/51] x86/paravirt: Don't use a PV sched_clock in CoCo guests with trusted TSC Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 48/51] x86/kvmclock: Use TSC for sched_clock if it's constant and non-stop Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 49/51] x86/kvmclock: Plumb in AP-online and BSP-resume to kvmlock, for documentation Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 50/51] x86/paravirt: Move using_native_sched_clock() stub into timer.h Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 51/51] x86/kvm: Get local APIC bus frequency from PV CPUID Timing Info Sean Christopherson
2026-08-07 0:08 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260806235536.2F41A1F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=seanjc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox