From: sashiko-bot@kernel.org
To: "Sean Christopherson" <seanjc@google.com>
Cc: linux-hyperv@vger.kernel.org, kvm@vger.kernel.org
Subject: Re: [PATCH v6 29/51] x86/kvm: Don't disable kvmclock on BSP in syscore_suspend()
Date: Fri, 07 Aug 2026 00:04:51 +0000 [thread overview]
Message-ID: <20260807000452.4CFBA1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260806233609.212337-30-seanjc@google.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] This problem wasn't introduced by this patch, but the KVM migration control MSR (MSR_KVM_MIGRATION_CONTROL) is disabled on suspend or CPU offline and never re-enabled on resume or CPU online, permanently breaking SEV live migration.
--
--- Patch [29]: [PATCH v6 29/51] x86/kvm: Don't disable kvmclock on BSP in syscore_suspend() ---
commit bb5c379a7a7675001e9cbd3ac5ed082d68cc68ae
Author: Sean Christopherson <seanjc@google.com>
x86/kvm: Don't disable kvmclock on BSP in syscore_suspend()
This commit introduces a kvm_guest_cpu_action enum to avoid disabling
kvmclock on the BSP during syscore_suspend. The BSP's clock is restored
earlier via sched_clock, and disabling it can cause time drift over time.
> diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
> --- a/arch/x86/kernel/kvm.c
> +++ b/arch/x86/kernel/kvm.c
[ ... ]
> @@ -460,7 +460,7 @@ static void __init sev_map_percpu_data(void)
> }
> }
>
> -static void kvm_guest_cpu_offline(bool shutdown)
> +static void kvm_guest_cpu_offline(enum kvm_guest_cpu_action action)
> {
> kvm_disable_steal_time();
> if (kvm_para_has_feature(KVM_FEATURE_PV_EOI))
> @@ -468,9 +468,10 @@ static void kvm_guest_cpu_offline(bool shutdown)
> if (kvm_para_has_feature(KVM_FEATURE_MIGRATION_CONTROL))
> wrmsrq(MSR_KVM_MIGRATION_CONTROL, 0);
[Severity: High]
This is a pre-existing issue, but does this permanently break SEV live
migration after a suspend/resume cycle?
When a CPU goes offline or the system suspends, kvm_guest_cpu_offline()
clears MSR_KVM_MIGRATION_CONTROL. However, it appears this MSR is never
re-enabled when the CPU comes back online.
For example, when the system resumes, kvm_guest_cpu_init() is called
to restore other PV state like PV EOI and async PF, but it does not
appear to restore MSR_KVM_MIGRATION_CONTROL.
Could this lack of restoration cause a SEV guest to permanently lose the
ability to be live-migrated after an AP offline/online event or a
suspend/resume?
> kvm_pv_disable_apf();
> - if (!shutdown)
> + if (action != KVM_GUEST_SHUTDOWN)
> apf_task_wake_all();
> - kvmclock_disable();
> +
> + kvmclock_cpu_action(action);
> }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260806233609.212337-1-seanjc@google.com?part=29
next prev parent reply other threads:[~2026-08-07 0:04 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 23:35 [PATCH v6 00/51] x86: Try to wrangle PV clocks vs. TSC Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 01/51] x86/apic: Provide helpers to set local APIC timer frequency in hz and khz Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 02/51] x86/apic: Add CONFIG_X86_LOCAL_APIC=n stubs for APIC timer frequency APIs Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 03/51] x86/tsc: Ensure that TSC recalibration doesn't run if TSC frequency is known Sean Christopherson
2026-08-06 23:55 ` sashiko-bot
2026-08-06 23:35 ` [PATCH v6 04/51] x86/tsc: Restrict recalibrate_cpu_khz() export to p4-clockmod and powernow-k7 Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 05/51] x86/sev: Mark TSC as reliable when configuring Secure TSC Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 06/51] x86/sev: Don't override CPU frequency calibration for SNP's " Sean Christopherson
2026-08-06 23:55 ` sashiko-bot
2026-08-06 23:35 ` [PATCH v6 07/51] x86/sev: Move check for SNP Secure TSC support to tsc_early_init() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 08/51] x86/sev: Shove SNP's secure/trusted TSC frequency directly into "calibration" Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 09/51] x86/tsc: Add a standalone helper for getting TSC info from CPUID.0x15 Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 10/51] x86/tdx: Force TSC frequency with CPUID-based info provided by the TDX-Module Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 11/51] x86/tsc: Add dedicated hypervisor hooks for getting known TSC/CPU frequencies Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 12/51] x86/acrn: Register TSC/CPU frequency callbacks iff frequency is actually in CPUID Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 13/51] x86/acrn: Mark TSC frequency as known when using ACRN for calibration Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 14/51] x86/tsc: Consolidate forcing of X86_FEATURE_TSC_KNOWN_FREQ for PV code Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 15/51] x86/tsc: Kill off x86_platform_ops.calibrate_{cpu,tsc}() hooks Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 16/51] x86/tsc: Rename pit_hpet_ptimer_calibrate_cpu() => native_calibrate_cpu_late() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 17/51] x86/tsc: Fold native_calibrate_cpu() into recalibrate_cpu_khz() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 18/51] x86/kvmclock: Rename kvm_get_tsc_khz() to kvmclock_get_tsc_khz() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 19/51] x86/kvmclock: Drop dead check on TSC being unstable during kvmclock_init() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 20/51] KVM: x86: Officially define CPUID 0x40000010 as PV Timing Info (TSC and Bus) Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 21/51] x86/kvm: Obtain TSC frequency from PV CPUID if present Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 22/51] x86/kvm: Mark TSC as reliable when it's constant and nonstop Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 23/51] x86/tsc: Add standalone helper for getting CPU frequency from CPUID Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 24/51] x86/kvm: Get CPU base frequency from CPUID when it's available Sean Christopherson
2026-08-07 0:04 ` sashiko-bot
2026-08-06 23:35 ` [PATCH v6 25/51] clocksource: hyper-v: Register sched_clock save/restore iff it's necessary Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 26/51] clocksource: hyper-v: Drop wrappers to sched_clock save/restore helpers Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 27/51] clocksource: hyper-v: Don't save/restore TSC offset when using HV sched_clock Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 28/51] x86/kvmclock: Setup kvmclock for secondary CPUs iff CONFIG_SMP=y Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 29/51] x86/kvm: Don't disable kvmclock on BSP in syscore_suspend() Sean Christopherson
2026-08-07 0:04 ` sashiko-bot [this message]
2026-08-06 23:35 ` [PATCH v6 30/51] x86/paravirt: Remove unnecessary PARAVIRT=n stub for paravirt_set_sched_clock() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 31/51] x86/paravirt: Move handling of unstable PV clocks into paravirt_set_sched_clock() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 32/51] x86/kvmclock: Move sched_clock save/restore helpers up in kvmclock.c Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 33/51] x86/xen/time: NOP-ify x86_platform's sched_clock save/restore hooks Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 34/51] x86/vmware: NOP-ify save/restore hooks when using VMware's sched_clock Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 35/51] x86/tsc: WARN if TSC sched_clock save/restore used with PV sched_clock Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 36/51] x86/paravirt: Pass sched_clock save/restore helpers during registration Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 37/51] x86/kvmclock: Move kvm_sched_clock_init() down in kvmclock.c Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 38/51] x86/xen/time: Mark xen_setup_vsyscall_time_info() as __init Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 39/51] x86/pvclock: Mark setup helpers and related various as __init/__ro_after_init Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 40/51] x86/pvclock: WARN if pvclock's valid_flags are overwritten Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 41/51] x86/kvmclock: Refactor handling of PVCLOCK_TSC_STABLE_BIT during kvmclock_init() Sean Christopherson
2026-08-06 23:35 ` [PATCH v6 42/51] timekeeping: Resume clocksources before reading persistent clock Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 43/51] x86/kvmclock: Hook clocksource.suspend/resume when kvmclock isn't sched_clock Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 44/51] x86/kvmclock: WARN if wall clock is read while kvmclock is suspended Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 45/51] x86/paravirt: Mark __paravirt_set_sched_clock() as __init Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 46/51] x86/paravirt: Plumb a return code into __paravirt_set_sched_clock() Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 47/51] x86/paravirt: Don't use a PV sched_clock in CoCo guests with trusted TSC Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 48/51] x86/kvmclock: Use TSC for sched_clock if it's constant and non-stop Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 49/51] x86/kvmclock: Plumb in AP-online and BSP-resume to kvmlock, for documentation Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 50/51] x86/paravirt: Move using_native_sched_clock() stub into timer.h Sean Christopherson
2026-08-06 23:36 ` [PATCH v6 51/51] x86/kvm: Get local APIC bus frequency from PV CPUID Timing Info Sean Christopherson
2026-08-07 0:08 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807000452.4CFBA1F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=seanjc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox