Kernel KVM virtualization development
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Sascha Bischoff" <Sascha.Bischoff@arm.com>
Cc: kvmarm@lists.linux.dev, kvm@vger.kernel.org,
	"Oliver Upton" <oupton@kernel.org>,
	"Marc Zyngier" <maz@kernel.org>
Subject: Re: [PATCH v5 03/49] irqchip/gic-v5: Set up gic_kvm_info on ACPI hosts
Date: Fri, 07 Aug 2026 12:01:14 +0000	[thread overview]
Message-ID: <20260807120115.368FC1F00A3A@smtp.kernel.org> (raw)
In-Reply-To: <20260807111159.429128-4-sascha.bischoff@arm.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Missing bounds check in gic_acpi_parse_virt_madt_gicc() when parsing ACPI MADT GICC subtables, leading to out-of-bounds read on malformed tables.
--

--- Patch [3]: [PATCH v5 03/49] irqchip/gic-v5: Set up gic_kvm_info on ACPI hosts ---
commit 7147e5b6fec39dcd71e533b7ddd5252d309103a5
Author: Sascha Bischoff <Sascha.Bischoff@arm.com>

irqchip/gic-v5: Set up gic_kvm_info on ACPI hosts

This commit adds the ACPI equivalent of the DT KVM setup for GICv5. It parses
the MADT GICC entries to retrieve and register the maintenance interrupt, and
passes the resulting IRQ along with IRS base and coherency information to KVM.

> diff --git a/drivers/irqchip/irq-gic-v5.c b/drivers/irqchip/irq-gic-v5.c
> index e7a7aedcfaf78..5b8ea8551d832 100644
> --- a/drivers/irqchip/irq-gic-v5.c
> +++ b/drivers/irqchip/irq-gic-v5.c
[ ... ]
> @@ -1162,11 +1164,95 @@ static void __init gic_of_setup_kvm_info(struct device_node *node)
[ ... ]
> +static int __init gic_acpi_parse_virt_madt_gicc(union acpi_subtable_headers *header,
> +						const unsigned long end)
> +{
> +	struct acpi_madt_generic_interrupt *gicc =
> +		(struct acpi_madt_generic_interrupt *)header;
> +	static int first_madt = true;
> +
> +	if (!(gicc->flags &

[Severity: High]
Could this read of gicc->flags lead to an out-of-bounds memory access?

If the firmware provides a malformed ACPI MADT table with an entry length
smaller than the size of struct acpi_madt_generic_interrupt, reading
gicc->flags or gicc->vgic_interrupt might cross a page boundary and cause a
kernel panic during early boot.

Would it make sense to validate the entry size against the end pointer here,
perhaps by using a macro like BAD_MADT_GICC_ENTRY(gicc, end), before accessing
any of the structure's fields?

> +	      (ACPI_MADT_ENABLED | ACPI_MADT_GICC_ONLINE_CAPABLE)))
> +		return 0;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260807111159.429128-1-sascha.bischoff@arm.com?part=3

  reply	other threads:[~2026-08-07 12:01 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-07 11:12 [PATCH v5 00/49] KVM: arm64: Add GICv5 IRS support Sascha Bischoff
2026-08-07 11:13 ` [PATCH v5 01/49] irqchip/gic-v5: Allow KVM setup without a maintenance IRQ Sascha Bischoff
2026-08-07 11:13 ` [PATCH v5 02/49] irqchip/gic-v5: Provide OF IRS config frame attrs to KVM Sascha Bischoff
2026-08-07 11:53   ` sashiko-bot
2026-08-07 11:14 ` [PATCH v5 03/49] irqchip/gic-v5: Set up gic_kvm_info on ACPI hosts Sascha Bischoff
2026-08-07 12:01   ` sashiko-bot [this message]
2026-08-07 13:44   ` Lorenzo Pieralisi
2026-08-07 11:14 ` [PATCH v5 04/49] KVM: arm64: gic-v5: Define remaining IRS MMIO registers Sascha Bischoff
2026-08-07 12:05   ` sashiko-bot
2026-08-07 11:15 ` [PATCH v5 05/49] arm64/sysreg: Add GICv5 GIC VDPEND encoding Sascha Bischoff
2026-08-07 11:15 ` [PATCH v5 06/49] arm64/sysreg: Update ICC_CR0_EL1 with LINK and LINK_IDLE fields Sascha Bischoff
2026-08-07 12:17   ` sashiko-bot
2026-08-07 11:16 ` [PATCH v5 07/49] KVM: arm64: gic-v5: Cache host IRS ID registers Sascha Bischoff
2026-08-07 12:27   ` sashiko-bot
2026-08-07 11:16 ` [PATCH v5 08/49] KVM: arm64: gic-v5: Add VPE doorbell domain Sascha Bischoff
2026-08-07 12:45   ` sashiko-bot
2026-08-07 11:17 ` [PATCH v5 09/49] KVM: arm64: gic-v5: Create and manage VM and VPE tables Sascha Bischoff
2026-08-07 12:50   ` sashiko-bot
2026-08-07 11:17 ` [PATCH v5 10/49] KVM: arm64: gic-v5: Introduce guest IST alloc and management Sascha Bischoff
2026-08-07 13:07   ` sashiko-bot
2026-08-07 11:18 ` [PATCH v5 11/49] KVM: arm64: gic-v5: Implement VMT/vIST IRS MMIO Ops Sascha Bischoff
2026-08-07 13:13   ` sashiko-bot
2026-08-07 11:18 ` [PATCH v5 12/49] KVM: arm64: gic-v5: Keep GICv5 vCPU limit model-specific Sascha Bischoff
2026-08-07 13:30   ` sashiko-bot
2026-08-07 11:19 ` [PATCH v5 13/49] KVM: arm64: gic-v5: Implement VPE IRS MMIO Ops Sascha Bischoff
2026-08-07 11:19 ` [PATCH v5 14/49] KVM: arm64: gic-v5: Set up VMTEs and VPE doorbells Sascha Bischoff
2026-08-07 13:42   ` sashiko-bot
2026-08-07 11:20 ` [PATCH v5 15/49] KVM: arm64: gic-v5: Add resident/non-resident hyp calls Sascha Bischoff
2026-08-07 11:20 ` [PATCH v5 16/49] KVM: arm64: gic-v5: Request doorbells when VPEs enter WFI Sascha Bischoff
2026-08-07 14:17   ` sashiko-bot
2026-08-07 11:21 ` [PATCH v5 17/49] KVM: arm64: gic-v5: Introduce struct vgic_v5_irs and IRS base address Sascha Bischoff
2026-08-07 11:21 ` [PATCH v5 18/49] KVM: arm64: gic-v5: Add IRS IODEV support to MMIO handlers Sascha Bischoff
2026-08-07 11:22 ` [PATCH v5 19/49] KVM: arm64: gic-v5: Add KVM_VGIC_V5_ADDR_TYPE_IRS to UAPI Sascha Bischoff
2026-08-07 14:27   ` sashiko-bot
2026-08-07 11:22 ` [PATCH v5 20/49] KVM: arm64: gic-v5: Add GICv5 IRS IODEV and MMIO emulation Sascha Bischoff
2026-08-07 14:34   ` sashiko-bot
2026-08-07 11:23 ` [PATCH v5 21/49] KVM: arm64: gic-v5: Initialise per-VM IRS state Sascha Bischoff
2026-08-07 14:49   ` sashiko-bot
2026-08-07 11:23 ` [PATCH v5 22/49] KVM: arm64: gic-v5: Register the IRS IODEV Sascha Bischoff
2026-08-07 14:52   ` sashiko-bot
2026-08-07 11:24 ` [PATCH v5 23/49] KVM: arm64: gic-v5: Set IRICHPPIDIS based on IRS enable state Sascha Bischoff
2026-08-07 11:24 ` [PATCH v5 24/49] KVM: arm64: selftests: Update vGICv5 selftest to set IRS address Sascha Bischoff
2026-08-07 15:04   ` sashiko-bot
2026-08-07 11:25 ` [PATCH v5 25/49] KVM: arm64: gic-v5: Add GIC VDPEND hyp call Sascha Bischoff
2026-08-07 11:25 ` [PATCH v5 26/49] KVM: arm64: gic: Introduce set_pending_state() to irq_ops Sascha Bischoff
2026-08-07 15:14   ` sashiko-bot
2026-08-07 11:26 ` [PATCH v5 27/49] KVM: arm64: gic-v5: Support SPI injection Sascha Bischoff
2026-08-07 15:23   ` sashiko-bot
2026-08-07 11:26 ` [PATCH v5 28/49] Documentation: KVM: Extend VGICv5 device attribute docs Sascha Bischoff
2026-08-07 15:29   ` sashiko-bot
2026-08-07 11:27 ` [PATCH v5 29/49] KVM: arm64: gic-v5: Add GICv5 SPI injection to irqfd Sascha Bischoff
2026-08-07 15:40   ` sashiko-bot
2026-08-07 11:27 ` [PATCH v5 30/49] KVM: arm64: gic-v5: Mask per-vCPU PPI state in vgic_v5_finalize_ppi_state() Sascha Bischoff
2026-08-07 11:28 ` [PATCH v5 31/49] KVM: arm64: gic-v5: Add GICv5 EL1 sysreg userspace accessors Sascha Bischoff
2026-08-07 16:27   ` sashiko-bot
2026-08-07 11:28 ` [PATCH v5 32/49] KVM: arm64: gic-v5: Handle userspace accesses to IRS MMIO region Sascha Bischoff
2026-08-07 16:20   ` sashiko-bot
2026-08-07 11:29 ` [PATCH v5 33/49] KVM: arm64: gic-v5: Add CoreSight MMIO regs to IRS Sascha Bischoff
2026-08-07 11:29 ` [PATCH v5 34/49] KVM: arm64: gic-v5: Add VGICv5 IST save/restore UAPI Sascha Bischoff
2026-08-07 16:30   ` sashiko-bot
2026-08-07 11:30 ` [PATCH v5 35/49] KVM: arm64: gic-v5: Implement save/restore mechanisms for ISTs Sascha Bischoff
2026-08-07 16:48   ` sashiko-bot
2026-08-07 11:30 ` [PATCH v5 36/49] Documentation: KVM: Document KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS for VGICv5 Sascha Bischoff
2026-08-07 16:55   ` sashiko-bot
2026-08-07 11:31 ` [PATCH v5 37/49] Documentation: KVM: Add KVM_DEV_ARM_VGIC_GRP_IRS_REGS to VGICv5 docs Sascha Bischoff
2026-08-07 16:52   ` sashiko-bot
2026-08-07 11:31 ` [PATCH v5 38/49] Documentation: KVM: Add docs for KVM_DEV_ARM_VGIC_GRP_IST Sascha Bischoff
2026-08-07 11:32 ` [PATCH v5 39/49] Documentation: KVM: Add the VGICv5 IRS save/restore sequences Sascha Bischoff
2026-08-07 11:32 ` [PATCH v5 40/49] KVM: selftests: Add VGICv5 IRS address attribute tests Sascha Bischoff
2026-08-07 11:33 ` [PATCH v5 41/49] KVM: selftests: Add VGICv5 NR_IRQS " Sascha Bischoff
2026-08-07 17:12   ` sashiko-bot
2026-08-07 11:33 ` [PATCH v5 42/49] KVM: selftests: Add VGICv5 IRS_REGS " Sascha Bischoff
2026-08-07 17:17   ` sashiko-bot
2026-08-07 11:34 ` [PATCH v5 43/49] KVM: selftests: Add VGICv5 IST " Sascha Bischoff
2026-08-07 17:21   ` sashiko-bot
2026-08-07 11:35 ` [PATCH v5 44/49] KVM: selftests: Add VGICv5 USERSPACE_PPIS tests Sascha Bischoff
2026-08-07 11:35 ` [PATCH v5 45/49] KVM: selftests: Add VGICv5 CPU sysreg attribute tests Sascha Bischoff
2026-08-07 11:36 ` [PATCH v5 46/49] KVM: selftests: Add VGICv5 SPI injection tests Sascha Bischoff
2026-08-07 11:36 ` [PATCH v5 47/49] KVM: selftests: Add VGICv5 LPI delivery tests Sascha Bischoff
2026-08-07 17:39   ` sashiko-bot
2026-08-07 11:37 ` [PATCH v5 48/49] KVM: selftests: Add VGICv5 IST save/restore coverage Sascha Bischoff
2026-08-07 17:50   ` sashiko-bot
2026-08-07 11:37 ` [PATCH v5 49/49] KVM: selftests: Add VGICv5 sparse vCPU IDs test Sascha Bischoff
2026-08-07 17:56   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260807120115.368FC1F00A3A@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Sascha.Bischoff@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.linux.dev \
    --cc=maz@kernel.org \
    --cc=oupton@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox