From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
To: Peter Fang <peter.fang@intel.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Kiryl Shutsemau <kas@kernel.org>,
Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Thomas Gleixner <tglx@kernel.org>, Ingo Molnar <mingo@redhat.com>,
Borislav Petkov <bp@alien8.de>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
linux-kernel@vger.kernel.org, linux-coco@lists.linux.dev,
kvm@vger.kernel.org
Subject: Re: [PATCH 2/2] virt: tdx-guest: Allocate Quote buffer dynamically
Date: Mon, 13 Jul 2026 10:27:46 -0700 [thread overview]
Message-ID: <283d7cc7-e87e-4d4e-b1d9-ae19725e1606@linux.intel.com> (raw)
In-Reply-To: <20260612110853.3188196-3-peter.fang@intel.com>
Hi Peter,
On 6/12/2026 4:08 AM, Peter Fang wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>
> The TDX attestation driver currently uses a fixed 128 KB Quote buffer
> shared with the host VMM. This may be too small for Quotes using schemes
> such as post-quantum cryptography (PQC), where certificate chains can
> increase the Quote size to several megabytes.
>
> Allocate the Quote buffer based on the size reported by the TDX module
> instead of always reserving a fixed-size buffer. This avoids wasting
> memory on platforms that do not require larger Quotes. Older platforms
> fall back to the default 128 KB buffer.
>
> Because the Quote buffer must be physically contiguous, its size is
> bound by the buddy allocator's maximum page order (4 MB), which should
> be sufficient for current attestation needs.
>
> struct tdx_quote_buf has a trailing flexible array, so use offsetof()
> instead of sizeof() to calculate the header size.
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> Assisted-by: Claude:claude-opus-4-7
> Assisted-by: GitHub Copilot:gpt-5.4
> Signed-off-by: Peter Fang <peter.fang@intel.com>
> ---
Looks good to me.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> drivers/virt/coco/tdx-guest/tdx-guest.c | 52 ++++++++++++++++++-------
> 1 file changed, 38 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/virt/coco/tdx-guest/tdx-guest.c b/drivers/virt/coco/tdx-guest/tdx-guest.c
> index a9ecc46df187..162fb47f3fae 100644
> --- a/drivers/virt/coco/tdx-guest/tdx-guest.c
> +++ b/drivers/virt/coco/tdx-guest/tdx-guest.c
> @@ -163,7 +163,7 @@ static void tdx_mr_deinit(const struct attribute_group *mr_grp)
> * DICE-based attestation uses layered evidence that requires
> * larger Quote size (~100K).
> */
> -#define GET_QUOTE_BUF_SIZE SZ_128K
> +#define GET_QUOTE_DEFAULT_BUF_SIZE SZ_128K
>
> #define GET_QUOTE_CMD_VER 1
>
> @@ -171,7 +171,7 @@ static void tdx_mr_deinit(const struct attribute_group *mr_grp)
> #define GET_QUOTE_SUCCESS 0
> #define GET_QUOTE_IN_FLIGHT 0xffffffffffffffff
>
> -#define TDX_QUOTE_MAX_LEN (GET_QUOTE_BUF_SIZE - sizeof(struct tdx_quote_buf))
> +#define TDX_QUOTE_BUF_LEN(n) (offsetof(struct tdx_quote_buf, data) + (n))
>
> /* struct tdx_quote_buf: Format of Quote request buffer.
> * @version: Quote format version, filled by TD.
> @@ -192,8 +192,9 @@ struct tdx_quote_buf {
> u8 data[];
> };
>
> -/* Quote data buffer */
> +/* Quote data buffer and size */
> static void *quote_data;
> +static size_t quote_data_size;
>
> /* Lock to streamline quote requests */
> static DEFINE_MUTEX(quote_lock);
> @@ -210,9 +211,8 @@ static long tdx_get_report0(struct tdx_report_req __user *req)
> USER_SOCKPTR(req->tdreport));
> }
>
> -static void free_quote_buf(void *buf)
> +static void free_quote_buf(void *buf, size_t len)
> {
> - size_t len = PAGE_ALIGN(GET_QUOTE_BUF_SIZE);
> unsigned int count = len >> PAGE_SHIFT;
>
> if (set_memory_encrypted((unsigned long)buf, count)) {
> @@ -223,19 +223,43 @@ static void free_quote_buf(void *buf)
> free_pages_exact(buf, len);
> }
>
> -static void *alloc_quote_buf(void)
> +static size_t get_quote_buf_size(void)
> {
> - size_t len = PAGE_ALIGN(GET_QUOTE_BUF_SIZE);
> - unsigned int count = len >> PAGE_SHIFT;
> + size_t buf_sz = GET_QUOTE_DEFAULT_BUF_SIZE;
> + u32 quote_sz;
> +
> + quote_sz = tdx_get_max_quote_size();
> +
> + if (quote_sz)
> + /* Reported size does not include GetQuote header */
> + buf_sz = TDX_QUOTE_BUF_LEN(quote_sz);
> +
> + return PAGE_ALIGN(buf_sz);
> +}
> +
> +static void *alloc_quote_buf(size_t *buflen)
> +{
> + unsigned int count;
> + size_t len;
> void *addr;
>
> + len = get_quote_buf_size();
> +
> + /*
> + * This fails if the requested size exceeds the buddy allocator's
> + * maximum order (order-10, 4MB).
> + */
> addr = alloc_pages_exact(len, GFP_KERNEL | __GFP_ZERO);
> if (!addr)
> return NULL;
>
> + count = len >> PAGE_SHIFT;
> +
> if (set_memory_decrypted((unsigned long)addr, count))
> return NULL;
>
> + *buflen = len;
> +
> return addr;
> }
>
> @@ -286,7 +310,7 @@ static int tdx_report_new_locked(struct tsm_report *report, void *data)
> if (desc->inblob_len != TDX_REPORTDATA_LEN)
> return -EINVAL;
>
> - memset(quote_data, 0, GET_QUOTE_BUF_SIZE);
> + memset(quote_data, 0, quote_data_size);
>
> /* Update Quote buffer header */
> quote_buf->version = GET_QUOTE_CMD_VER;
> @@ -297,7 +321,7 @@ static int tdx_report_new_locked(struct tsm_report *report, void *data)
> if (ret)
> return ret;
>
> - err = tdx_hcall_get_quote(quote_data, GET_QUOTE_BUF_SIZE);
> + err = tdx_hcall_get_quote(quote_data, quote_data_size);
> if (err) {
> pr_err("GetQuote hypercall failed, status:%llx\n", err);
> return -EIO;
> @@ -316,7 +340,7 @@ static int tdx_report_new_locked(struct tsm_report *report, void *data)
>
> out_len = READ_ONCE(quote_buf->out_len);
>
> - if (out_len > TDX_QUOTE_MAX_LEN)
> + if (TDX_QUOTE_BUF_LEN(out_len) > quote_data_size)
> return -EFBIG;
Nit: I think this check will be more readable if you can rename
quote_data_size to quote_buf_size (since it holds total buffer
size).
>
> buf = kvmemdup(quote_buf->data, out_len, GFP_KERNEL);
> @@ -418,7 +442,7 @@ static int __init tdx_guest_init(void)
> if (ret)
> goto deinit_mr;
>
> - quote_data = alloc_quote_buf();
> + quote_data = alloc_quote_buf("e_data_size);
> if (!quote_data) {
> pr_err("Failed to allocate Quote buffer\n");
> ret = -ENOMEM;
> @@ -432,7 +456,7 @@ static int __init tdx_guest_init(void)
> return 0;
>
> free_quote:
> - free_quote_buf(quote_data);
> + free_quote_buf(quote_data, quote_data_size);
> free_misc:
> misc_deregister(&tdx_misc_dev);
> deinit_mr:
> @@ -445,7 +469,7 @@ module_init(tdx_guest_init);
> static void __exit tdx_guest_exit(void)
> {
> tsm_report_unregister(&tdx_tsm_ops);
> - free_quote_buf(quote_data);
> + free_quote_buf(quote_data, quote_data_size);
> misc_deregister(&tdx_misc_dev);
> tdx_mr_deinit(tdx_attr_groups[0]);
> }
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
next prev parent reply other threads:[~2026-07-13 17:27 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 11:08 [PATCH 0/2] tdx-guest: Make Quote buffer size dynamic Peter Fang
2026-06-12 11:08 ` [PATCH 1/2] x86/tdx: Add helper to query maximum TD Quote size Peter Fang
2026-06-12 12:36 ` Kiryl Shutsemau
2026-06-23 4:30 ` Peter Fang
2026-07-10 2:38 ` Binbin Wu
2026-07-14 5:54 ` Peter Fang
2026-06-12 14:25 ` Xiaoyao Li
2026-06-23 4:44 ` Peter Fang
2026-07-02 10:16 ` Xiaoyao Li
2026-07-06 9:18 ` Peter Fang
2026-07-13 16:01 ` Kuppuswamy Sathyanarayanan
2026-07-14 5:56 ` Peter Fang
2026-06-12 11:08 ` [PATCH 2/2] virt: tdx-guest: Allocate Quote buffer dynamically Peter Fang
2026-06-12 11:22 ` sashiko-bot
2026-06-12 12:37 ` Kiryl Shutsemau
2026-06-23 5:11 ` Peter Fang
2026-07-10 3:32 ` Binbin Wu
2026-07-14 6:18 ` Peter Fang
2026-07-13 17:27 ` Kuppuswamy Sathyanarayanan [this message]
2026-07-14 6:25 ` Peter Fang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=283d7cc7-e87e-4d4e-b1d9-ae19725e1606@linux.intel.com \
--to=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peter.fang@intel.com \
--cc=rick.p.edgecombe@intel.com \
--cc=tglx@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox