From: "Andreas Färber" <afaerber@suse.de>
To: Borislav Petkov <bp@alien8.de>
Cc: KVM <kvm@vger.kernel.org>, Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>,
Eduardo Habkost <ehabkost@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
qemu-devel <qemu-devel@nongnu.org>
Subject: Re: [PATCH] target-i386: Do not set MCG_SER_P by default
Date: Sat, 21 Nov 2015 00:11:35 +0100 [thread overview]
Message-ID: <564FA8A7.3000500@suse.de> (raw)
In-Reply-To: <1448060471-14128-1-git-send-email-bp@alien8.de>
Hi,
CC'ing qemu-devel.
Am 21.11.2015 um 00:01 schrieb Borislav Petkov:
> From: Borislav Petkov <bp@suse.de>
>
> Software Error Recovery, i.e. SER, is purely an Intel feature and it
> shouldn't be set by default. Enable it only on Intel.
Is this new in 2.5? Otherwise we would probably need compatibility code
in pc*.[ch] for incoming live migration from older versions.
>
> Signed-off-by: Borislav Petkov <bp@suse.de>
> ---
> target-i386/cpu.c | 7 -------
> target-i386/cpu.h | 9 ++++++++-
> target-i386/kvm.c | 5 +++++
> 3 files changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/target-i386/cpu.c b/target-i386/cpu.c
> index 11e5e39a756a..8155ee94fbe1 100644
> --- a/target-i386/cpu.c
> +++ b/target-i386/cpu.c
> @@ -2803,13 +2803,6 @@ static void x86_cpu_apic_realize(X86CPU *cpu, Error **errp)
> }
> #endif
>
> -
> -#define IS_INTEL_CPU(env) ((env)->cpuid_vendor1 == CPUID_VENDOR_INTEL_1 && \
> - (env)->cpuid_vendor2 == CPUID_VENDOR_INTEL_2 && \
> - (env)->cpuid_vendor3 == CPUID_VENDOR_INTEL_3)
> -#define IS_AMD_CPU(env) ((env)->cpuid_vendor1 == CPUID_VENDOR_AMD_1 && \
> - (env)->cpuid_vendor2 == CPUID_VENDOR_AMD_2 && \
> - (env)->cpuid_vendor3 == CPUID_VENDOR_AMD_3)
> static void x86_cpu_realizefn(DeviceState *dev, Error **errp)
> {
> CPUState *cs = CPU(dev);
> diff --git a/target-i386/cpu.h b/target-i386/cpu.h
> index fc4a605d6a29..2605c564239a 100644
> --- a/target-i386/cpu.h
> +++ b/target-i386/cpu.h
> @@ -283,7 +283,7 @@
> #define MCG_CTL_P (1ULL<<8) /* MCG_CAP register available */
> #define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
>
> -#define MCE_CAP_DEF (MCG_CTL_P|MCG_SER_P)
> +#define MCE_CAP_DEF MCG_CTL_P
> #define MCE_BANKS_DEF 10
>
> #define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
> @@ -610,6 +610,13 @@ typedef uint32_t FeatureWordArray[FEATURE_WORDS];
> #define CPUID_MWAIT_IBE (1U << 1) /* Interrupts can exit capability */
> #define CPUID_MWAIT_EMX (1U << 0) /* enumeration supported */
>
> +#define IS_INTEL_CPU(env) ((env)->cpuid_vendor1 == CPUID_VENDOR_INTEL_1 && \
> + (env)->cpuid_vendor2 == CPUID_VENDOR_INTEL_2 && \
> + (env)->cpuid_vendor3 == CPUID_VENDOR_INTEL_3)
> +#define IS_AMD_CPU(env) ((env)->cpuid_vendor1 == CPUID_VENDOR_AMD_1 && \
> + (env)->cpuid_vendor2 == CPUID_VENDOR_AMD_2 && \
> + (env)->cpuid_vendor3 == CPUID_VENDOR_AMD_3)
> +
> #ifndef HYPERV_SPINLOCK_NEVER_RETRY
> #define HYPERV_SPINLOCK_NEVER_RETRY 0xFFFFFFFF
> #endif
> diff --git a/target-i386/kvm.c b/target-i386/kvm.c
> index 2a9953b2d4b5..082d38d4838d 100644
> --- a/target-i386/kvm.c
> +++ b/target-i386/kvm.c
> @@ -787,8 +787,13 @@ int kvm_arch_init_vcpu(CPUState *cs)
> if (banks > MCE_BANKS_DEF) {
> banks = MCE_BANKS_DEF;
> }
> +
> mcg_cap &= MCE_CAP_DEF;
> mcg_cap |= banks;
> +
> + if (IS_INTEL_CPU(env))
> + mcg_cap |= MCG_SER_P;
Tabs and missing braces.
> +
> ret = kvm_vcpu_ioctl(cs, KVM_X86_SETUP_MCE, &mcg_cap);
> if (ret < 0) {
> fprintf(stderr, "KVM_X86_SETUP_MCE: %s", strerror(-ret));
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg)
next prev parent reply other threads:[~2015-11-20 23:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-20 23:01 [PATCH] target-i386: Do not set MCG_SER_P by default Borislav Petkov
2015-11-20 23:11 ` Andreas Färber [this message]
2015-11-21 1:09 ` Borislav Petkov
2015-11-23 13:22 ` Eduardo Habkost
2015-11-23 14:47 ` Paolo Bonzini
2015-11-23 15:03 ` Borislav Petkov
2015-11-23 15:11 ` MCG_CAP ABI breakage (was Re: [Qemu-devel] [PATCH] target-i386: Do not set MCG_SER_P by default) Eduardo Habkost
2015-11-23 16:43 ` Borislav Petkov
2015-11-23 19:42 ` Eduardo Habkost
2015-11-23 20:46 ` Borislav Petkov
2015-11-24 16:36 ` Eduardo Habkost
2015-11-24 18:44 ` Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=564FA8A7.3000500@suse.de \
--to=afaerber@suse.de \
--cc=bp@alien8.de \
--cc=ehabkost@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox