Linux KVM/arm64 development list
 help / color / mirror / Atom feed
From: Oliver Upton <oliver.upton@linux.dev>
To: kvmarm@lists.linux.dev
Cc: Marc Zyngier <maz@kernel.org>, Joey Gouly <joey.gouly@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Zenghui Yu <yuzenghui@huawei.com>,
	Mingwei Zhang <mizhang@google.com>,
	Colton Lewis <coltonlewis@google.com>,
	Raghavendra Rao Ananta <rananta@google.com>,
	Oliver Upton <oliver.upton@linux.dev>
Subject: [PATCH v2 2/2] KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
Date: Tue, 19 Nov 2024 16:52:30 -0800	[thread overview]
Message-ID: <20241120005230.2335682-3-oliver.upton@linux.dev> (raw)
In-Reply-To: <20241120005230.2335682-1-oliver.upton@linux.dev>

The 'global enable control' (as it is termed in the architecture) for
counters reserved by EL2 is MDCR_EL2.HPME. Use that instead of
PMCR_EL0.E when evaluating the overflow state for hyp counters.

Change the return value to a bool while at it, which better reflects the
fact that the overflow state is a shared signal and not a per-counter
property.

Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
---
 arch/arm64/kvm/pmu-emul.c | 58 +++++++++++++++++++++++++++++----------
 1 file changed, 43 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index 3855cc9d0ca5..fb79fa689ae5 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -274,12 +274,21 @@ void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu)
 	irq_work_sync(&vcpu->arch.pmu.overflow_work);
 }
 
-bool kvm_pmu_counter_is_hyp(struct kvm_vcpu *vcpu, unsigned int idx)
+static u64 kvm_pmu_hyp_counter_mask(struct kvm_vcpu *vcpu)
 {
-	unsigned int hpmn;
+	if (!vcpu_has_nv(vcpu))
+		return 0;
 
-	if (!vcpu_has_nv(vcpu) || idx == ARMV8_PMU_CYCLE_IDX)
-		return false;
+	hpmn = SYS_FIELD_GET(MDCR_EL2, HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
+	n = vcpu->kvm->arch.pmcr_n;
+
+	/*
+	 * Programming HPMN to a value greater than PMCR_EL0.N is
+	 * CONSTRAINED UNPREDICTABLE. Make the implementation choice that an
+	 * UNKNOWN number of counters (in our case, zero) are reserved for EL2.
+	 */
+	if (hpmn >= n)
+		return 0;
 
 	/*
 	 * Programming HPMN=0 is CONSTRAINED UNPREDICTABLE if FEAT_HPMN0 isn't
@@ -288,8 +297,12 @@ bool kvm_pmu_counter_is_hyp(struct kvm_vcpu *vcpu, unsigned int idx)
 	 * implementation choice that all counters are included in the second
 	 * range reserved for EL2/EL3.
 	 */
-	hpmn = SYS_FIELD_GET(MDCR_EL2, HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
-	return idx >= hpmn;
+	return GENMASK(n - 1, hpmn);
+}
+
+bool kvm_pmu_counter_is_hyp(struct kvm_vcpu *vcpu, unsigned int idx)
+{
+	return kvm_pmu_hyp_counter_mask(vcpu) & BIT(idx);
 }
 
 u64 kvm_pmu_accessible_counter_mask(struct kvm_vcpu *vcpu)
@@ -300,8 +313,7 @@ u64 kvm_pmu_accessible_counter_mask(struct kvm_vcpu *vcpu)
 	if (!vcpu_has_nv(vcpu) || vcpu_is_el2(vcpu))
 		return mask;
 
-	hpmn = SYS_FIELD_GET(MDCR_EL2, HPMN, __vcpu_sys_reg(vcpu, MDCR_EL2));
-	return mask & ~GENMASK(vcpu->kvm->arch.pmcr_n - 1, hpmn);
+	return mask & ~kvm_pmu_hyp_counter_mask(vcpu);
 }
 
 u64 kvm_pmu_implemented_counter_mask(struct kvm_vcpu *vcpu)
@@ -375,14 +387,30 @@ void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
 	}
 }
 
-static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu)
+/*
+ * Returns the PMU overflow state, which is true if there exists an event
+ * counter where the values of the global enable control, PMOVSSET_EL0[n], and
+ * PMINTENSET_EL1[n] are all 1.
+ */
+static bool kvm_pmu_overflow_status(struct kvm_vcpu *vcpu)
 {
-	u64 reg = 0;
+	u64 reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
 
-	if ((kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E)) {
-		reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
-		reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
-	}
+	reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
+
+	/*
+	 * PMCR_EL0.E is the global enable control for event counters available
+	 * to EL0 and EL1.
+	 */
+	if (!(kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E))
+		reg &= kvm_pmu_hyp_counter_mask(vcpu);
+
+	/*
+	 * Otherwise, MDCR_EL2.HPME is the global enable control for event
+	 * counters reserved for EL2.
+	 */
+	if (!(vcpu_read_sys_reg(vcpu, MDCR_EL2) & MDCR_EL2_HPME))
+		reg &= ~kvm_pmu_hyp_counter_mask(vcpu);
 
 	return reg;
 }
@@ -395,7 +423,7 @@ static void kvm_pmu_update_state(struct kvm_vcpu *vcpu)
 	if (!kvm_vcpu_has_pmu(vcpu))
 		return;
 
-	overflow = !!kvm_pmu_overflow_status(vcpu);
+	overflow = kvm_pmu_overflow_status(vcpu);
 	if (pmu->irq_level == overflow)
 		return;
 
-- 
2.39.5


  parent reply	other threads:[~2024-11-20  0:52 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-20  0:52 [PATCH v2 0/2] KVM: arm64: Fixes for PMU overflow state Oliver Upton
2024-11-20  0:52 ` [PATCH v2 1/2] KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status Oliver Upton
2024-11-20  8:18   ` Marc Zyngier
2024-11-20  0:52 ` Oliver Upton [this message]
2024-11-20  1:00   ` [PATCH v2 2/2] KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters Oliver Upton
2024-11-20  8:38   ` Marc Zyngier
2024-11-20  8:54     ` Oliver Upton
2024-11-20  9:55       ` Marc Zyngier
2024-11-21  8:18 ` [PATCH v2 0/2] KVM: arm64: Fixes for PMU overflow state Oliver Upton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241120005230.2335682-3-oliver.upton@linux.dev \
    --to=oliver.upton@linux.dev \
    --cc=coltonlewis@google.com \
    --cc=joey.gouly@arm.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=maz@kernel.org \
    --cc=mizhang@google.com \
    --cc=rananta@google.com \
    --cc=suzuki.poulose@arm.com \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox