* The VM can not start
@ 2016-05-25 11:56 zhumin
2016-05-25 12:49 ` Marc Zyngier
0 siblings, 1 reply; 2+ messages in thread
From: zhumin @ 2016-05-25 11:56 UTC (permalink / raw)
To: kvmarm
[-- Attachment #1.1: Type: text/plain, Size: 4794 bytes --]
Hello everyone:
I try to put some function of hyp.S(in the EL2) to the EL3, and I implement it in Linux kernel 3.18.
But when I start the VM using the lkvm tool, the VM cannot start normally.
The output message like these:
terminal_0: Listening for serial connection on port 5000
terminal_1: Listening for serial connection on port 5001
terminal_2: Listening for serial connection on port 5002
terminal_3: Listening for serial connection on port 5003
Visualization web server started on port 2001
Simulation is started
Initializing cgroup subsys cpu
Linux version 3.14.43 (zm@centospc) (gcc version 4.9.1 20140529 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.07 - Linaro GCC 4.9-2014.06) ) #1 SMP PREEMPT Sat Jun 13 17:19:23 CST 2015
CPU: AArch64 Processor [410fd000] revision 0
bootconsole [earlycon0] enabled
cma: CMA: reserved 16 MiB at 9f000000
psci: probing function IDs from device-tree
PERCPU: Embedded 10 pages/cpu @ffffffc01efeb000 s11328 r8192 d21440 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129280
Kernel command line: pci=firmware earlyprintk=smh console=hvc0 root=/dev/vda init=/bin/sh
PID hash table entries: 2048 (order: 2, 16384 bytes)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
software IO TLB [mem 0x9a000000-0x9e000000] (64MB) mapped at [ffffffc01a000000-ffffffc01dffffff]
Memory: 420452K/524288K available (4120K kernel code, 288K rwdata, 1504K rodata, 191K init, 165K bss, 103836K reserved)
Virtual kernel memory layout:
vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
vmemmap : 0xffffffbc01c00000 - 0xffffffbc02300000 ( 7 MB)
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB)
.init : 0xffffffc000600000 - 0xffffffc00062fc40 ( 192 kB)
.text : 0xffffffc000080000 - 0xffffffc0005ff1d4 ( 5629 kB)
.data : 0xffffffc000630000 - 0xffffffc0006782a0 ( 289 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS:64 nr_irqs:64 0
Architected cp15 timer(s) running at 100.00MHz (virt).
sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 1 counters available
Then the system is stopped there.
While in the normal execution, the system should continue as follows:
Brought up 1 CPUs
SMP: Total of 1 processors activated.
devtmpfs: initialized
atomic64 test passed
regulator-dummy: no parameters
NET: Registered protocol family 16
vdso: 2 pages (1 code, 1 data) at base ffffffc000635000
hw-breakpoint: found 16 breakpoint and 16 watchpoint registers.
Serial: AMBA PL011 UART driver
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kvm [1]: HYP mode not available
futex hash table entries: 256 (order: 2, 16384 bytes)
fuse init (API version 7.22)
9p: Installing v9fs 9p2000 file system support
msgmni has been set to 853
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
3f8.U6_16550A: ttyS0 at MMIO 0x3f8 (irq = 32, base_baud = 115200) is a 16550A
2f8.U6_16550A: ttyS1 at MMIO 0x2f8 (irq = 33, base_baud = 115200) is a 16550A
3e8.U6_16550A: ttyS2 at MMIO 0x3e8 (irq = 34, base_baud = 115200) is a 16550A
2e8.U6_16550A: ttyS3 at MMIO 0x2e8 (irq = 35, base_baud = 115200) is a 16550A
console [hvc0] enabled
bootconsole [earlycon0] disabled
So, what's the problem is?
Can someone give me some advice or feedback?
Thank you for your help.
[-- Attachment #1.2: Type: text/html, Size: 5858 bytes --]
[-- Attachment #2: Type: text/plain, Size: 151 bytes --]
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: The VM can not start
2016-05-25 11:56 The VM can not start zhumin
@ 2016-05-25 12:49 ` Marc Zyngier
0 siblings, 0 replies; 2+ messages in thread
From: Marc Zyngier @ 2016-05-25 12:49 UTC (permalink / raw)
To: zhumin, kvmarm
[Please do NOT send HTML emails to this mailing list]
On 25/05/16 12:56, zhumin wrote:
> *Hello everyone:*
> *I try to put some function of hyp.S(in the EL2) to the EL3, and I
> implement it in Linux kernel 3.18.*
What function? Why?
> *But when I start the VM using the lkvm tool, the VM cannot start normally.*
> *The output message like these:*
> terminal_0: Listening for serial connection on port 5000
> terminal_1: Listening for serial connection on port 5001
> terminal_2: Listening for serial connection on port 5002
> terminal_3: Listening for serial connection on port 5003
> Visualization web server started on port 2001
> Simulation is started
> Initializing cgroup subsys cpu
> Linux version 3.14.43 (zm@centospc) (gcc version 4.9.1 20140529
> (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.07 - Linaro GCC
> 4.9-2014.06) ) #1 SMP PREEMPT Sat Jun 13 17:19:23 CST 2015
> CPU: AArch64 Processor [410fd000] revision 0
> bootconsole [earlycon0] enabled
> cma: CMA: reserved 16 MiB at 9f000000
> psci: probing function IDs from device-tree
> PERCPU: Embedded 10 pages/cpu @ffffffc01efeb000 s11328 r8192 d21440 u40960
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129280
> Kernel command line: pci=firmware earlyprintk=smh console=hvc0
> root=/dev/vda init=/bin/sh
> PID hash table entries: 2048 (order: 2, 16384 bytes)
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> software IO TLB [mem 0x9a000000-0x9e000000] (64MB) mapped at
> [ffffffc01a000000-ffffffc01dffffff]
> Memory: 420452K/524288K available (4120K kernel code, 288K rwdata, 1504K
> rodata, 191K init, 165K bss, 103836K reserved)
> Virtual kernel memory layout:
> vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
> vmemmap : 0xffffffbc01c00000 - 0xffffffbc02300000 ( 7 MB)
> modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
> memory : 0xffffffc000000000 - 0xffffffc020000000 ( 512 MB)
> .init : 0xffffffc000600000 - 0xffffffc00062fc40 ( 192 kB)
> .text : 0xffffffc000080000 - 0xffffffc0005ff1d4 ( 5629 kB)
> .data : 0xffffffc000630000 - 0xffffffc0006782a0 ( 289 kB)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> Preemptible hierarchical RCU implementation.
> RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
> RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
> NR_IRQS:64 nr_irqs:64 0
> Architected cp15 timer(s) running at 100.00MHz (virt).
> sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns
> Console: colour dummy device 80x25
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 200.00 BogoMIPS (lpj=1000000)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
> Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
> hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 1 counters available
> *Then the system is stopped there.*
> *While in the normal execution, the system should continue as follows: *
> Brought up 1 CPUs
> SMP: Total of 1 processors activated.
> devtmpfs: initialized
> atomic64 test passed
> regulator-dummy: no parameters
> NET: Registered protocol family 16
> vdso: 2 pages (1 code, 1 data) at base ffffffc000635000
> hw-breakpoint: found 16 breakpoint and 16 watchpoint registers.
> Serial: AMBA PL011 UART driver
> bio: create slab <bio-0> at 0
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> Switched to clocksource arch_sys_counter
> NET: Registered protocol family 2
> TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP: reno registered
> UDP hash table entries: 256 (order: 1, 8192 bytes)
> UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> kvm [1]: HYP mode not available
> futex hash table entries: 256 (order: 2, 16384 bytes)
> fuse init (API version 7.22)
> 9p: Installing v9fs 9p2000 file system support
> msgmni has been set to 853
> io scheduler noop registered
> io scheduler cfq registered (default)
> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> 3f8.U6_16550A: ttyS0 at MMIO 0x3f8 (irq = 32, base_baud = 115200) is a
> 16550A
> 2f8.U6_16550A: ttyS1 at MMIO 0x2f8 (irq = 33, base_baud = 115200) is a
> 16550A
> 3e8.U6_16550A: ttyS2 at MMIO 0x3e8 (irq = 34, base_baud = 115200) is a
> 16550A
> 2e8.U6_16550A: ttyS3 at MMIO 0x2e8 (irq = 35, base_baud = 115200) is a
> 16550A
> console [hvc0] enabled
> bootconsole [earlycon0] disabled
> So, what's the problem is?
I bet you don't have any interrupts delivered to your guest.
> Can someone give me some advice or feedback?
Not really, unless you try to explain what you're trying to achieve.
Using EL3 to do the job of EL2 is at best weird, and feels like a school
project gone horribly wrong...
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-05-25 12:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-25 11:56 The VM can not start zhumin
2016-05-25 12:49 ` Marc Zyngier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox