From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Dave Martin <Dave.Martin@arm.com>
Cc: catalin.marinas@arm.com, will@kernel.org, broonie@kernel.org,
oliver.upton@linux.dev, anshuman.khandual@arm.com,
robh@kernel.org, james.morse@arm.com, mark.rutland@arm.com,
joey.gouly@arm.com, ahmed.genidi@arm.com, kevin.brodsky@arm.com,
scott@os.amperecomputing.com, mbenes@suse.cz,
james.clark@linaro.org, frederic@kernel.org, rafael@kernel.org,
pavel@kernel.org, ryan.roberts@arm.com, suzuki.poulose@arm.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
kvmarm@lists.linux.dev
Subject: Re: [PATCH v3 3/5] arm64: save/restore SCTLR2_EL1 when cpu_suspend()/resume()
Date: Wed, 20 Aug 2025 18:22:59 +0100 [thread overview]
Message-ID: <aKYEcwKODLsevnTj@e129823.arm.com> (raw)
In-Reply-To: <aKXlkdHeBo+erWcB@e133380.arm.com>
Hi Dave,
> On Wed, Aug 13, 2025 at 01:01:16PM +0100, Yeoreum Yun wrote:
> > SCTLR2_EL1 register is optional starting from ARMv8.8/ARMv9.3,
> > and becomes mandatory from ARMv8.9/ARMv9.4
> > and serveral architectural feature are controled by bits in
> > these registers (i.e) FEAT_PAuth_LR or FEAT_CPA/CPA2
> >
> > Save and restore SCTLR2_EL1 when cpu_suspend() and resume().
> > so that configured value can sustain consistency before suspend and
> > after resume.
> >
> > Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
> > ---
> > arch/arm64/include/asm/suspend.h | 2 +-
> > arch/arm64/mm/proc.S | 26 ++++++++++++++++++--------
> > 2 files changed, 19 insertions(+), 9 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
> > index 0cde2f473971..eb60c9735553 100644
> > --- a/arch/arm64/include/asm/suspend.h
> > +++ b/arch/arm64/include/asm/suspend.h
> > @@ -2,7 +2,7 @@
> > #ifndef __ASM_SUSPEND_H
> > #define __ASM_SUSPEND_H
> >
> > -#define NR_CTX_REGS 13
> > +#define NR_CTX_REGS 14
> > #define NR_CALLEE_SAVED_REGS 12
> >
> > /*
> > diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
> > index 8c75965afc9e..f297bea7103b 100644
> > --- a/arch/arm64/mm/proc.S
> > +++ b/arch/arm64/mm/proc.S
> > @@ -87,8 +87,14 @@ SYM_FUNC_START(cpu_do_suspend)
> > mrs x9, mdscr_el1
> > mrs x10, oslsr_el1
> > mrs x11, sctlr_el1
> > - get_this_cpu_offset x12
> > - mrs x13, sp_el0
> > +alternative_if_not ARM64_HAS_SCTLR2
> > + mov x12, xzr
>
> Looking at this, maybe it can just be a nop for the !ARM64_HAS_SCTLR2
> case.
>
> (So, alternative_if ... alternative_if_else_nop_endif, similarly to
> what you have in cpu_do_resume.)
>
> The memory used to save this state should not be accessible to anything
> less privileged than the kernel anyway, so leaking whatever was in x12
> does not really feel like a concern...
Right. I'll change this.
Thanks!
>
>
> > +alternative_else
> > + mrs_s x12, SYS_SCTLR2_EL1
> > +alternative_endif
> > + get_this_cpu_offset x13
> > + mrs x14, sp_el0
> > +
> > stp x2, x3, [x0]
> > stp x4, x5, [x0, #16]
> > stp x6, x7, [x0, #32]
> > @@ -99,7 +105,7 @@ SYM_FUNC_START(cpu_do_suspend)
> > * Save x18 as it may be used as a platform register, e.g. by shadow
> > * call stack.
> > */
> > - str x18, [x0, #96]
> > + stp x14, x18, [x0, #96]
> > ret
> > SYM_FUNC_END(cpu_do_suspend)
> >
> > @@ -120,8 +126,8 @@ SYM_FUNC_START(cpu_do_resume)
> > * the buffer to minimize the risk of exposure when used for shadow
> > * call stack.
> > */
> > - ldr x18, [x0, #96]
> > - str xzr, [x0, #96]
> > + ldp x15, x18, [x0, #96]
> > + str xzr, [x0, #104]
> > msr tpidr_el0, x2
> > msr tpidrro_el0, x3
> > msr contextidr_el1, x4
> > @@ -136,8 +142,12 @@ SYM_FUNC_START(cpu_do_resume)
> > msr mdscr_el1, x10
> >
> > msr sctlr_el1, x12
> > - set_this_cpu_offset x13
> > - msr sp_el0, x14
> > +alternative_if ARM64_HAS_SCTLR2
> > + msr_s SYS_SCTLR2_EL1, x13
> > +alternative_else_nop_endif
> > +
> > + set_this_cpu_offset x14
> > + msr sp_el0, x15
> > /*
> > * Restore oslsr_el1 by writing oslar_el1
> > */
> > @@ -151,7 +161,7 @@ alternative_if ARM64_HAS_RAS_EXTN
> > msr_s SYS_DISR_EL0, xzr
> > alternative_else_nop_endif
> >
> > - ptrauth_keys_install_kernel_nosync x14, x1, x2, x3
> > + ptrauth_keys_install_kernel_nosync x15, x1, x2, x3
> > isb
> > ret
> > SYM_FUNC_END(cpu_do_resume)
> > --
> > LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
>
> Otherwise, this looks OK to me.
>
> Cheers
> ---Dave
--
Sincerely,
Yeoreum Yun
next prev parent reply other threads:[~2025-08-20 17:23 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-13 12:01 [PATCH v3 0/5] initialize SCTRL2_ELx Yeoreum Yun
2025-08-13 12:01 ` [PATCH v3 1/5] arm64: make SCTLR2_EL1 accessible Yeoreum Yun
2025-08-20 15:10 ` Dave Martin
2025-08-20 18:51 ` Yeoreum Yun
2025-08-13 12:01 ` [PATCH v3 2/5] arm64: initialise SCTLR2_ELx register at boot time Yeoreum Yun
2025-08-20 15:10 ` Dave Martin
2025-08-20 17:18 ` Yeoreum Yun
2025-08-13 12:01 ` [PATCH v3 3/5] arm64: save/restore SCTLR2_EL1 when cpu_suspend()/resume() Yeoreum Yun
2025-08-20 15:11 ` Dave Martin
2025-08-20 17:22 ` Yeoreum Yun [this message]
2025-08-13 12:01 ` [PATCH v3 4/5] arm64: initialise SCTLR2_EL1 at cpu_soft_restart() Yeoreum Yun
2025-08-20 15:11 ` Dave Martin
2025-08-20 17:32 ` Yeoreum Yun
2025-09-01 15:01 ` Dave Martin
2025-08-21 10:14 ` Yeoreum Yun
2025-08-13 12:01 ` [PATCH v3 5/5] arm64: make the per-task SCTLR2_EL1 Yeoreum Yun
2025-08-20 15:11 ` Dave Martin
2025-08-20 17:34 ` Yeoreum Yun
2025-08-20 15:11 ` [PATCH v3 0/5] initialize SCTRL2_ELx Dave Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aKYEcwKODLsevnTj@e129823.arm.com \
--to=yeoreum.yun@arm.com \
--cc=Dave.Martin@arm.com \
--cc=ahmed.genidi@arm.com \
--cc=anshuman.khandual@arm.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=frederic@kernel.org \
--cc=james.clark@linaro.org \
--cc=james.morse@arm.com \
--cc=joey.gouly@arm.com \
--cc=kevin.brodsky@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mbenes@suse.cz \
--cc=oliver.upton@linux.dev \
--cc=pavel@kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=scott@os.amperecomputing.com \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox