From: "Cow" <cow@gline.us>
To: lartc@vger.kernel.org
Subject: [LARTC] HTB problem...
Date: Mon, 06 Sep 2004 21:56:13 +0000 [thread overview]
Message-ID: <001301c4945c$53c79f70$6e1464ab@palle> (raw)
Hi folks.
Let's say I would like to make some bandwidth control on my network
using HTB. I have 2 clients:
PC1: 192.168.100.2
PC2: 192.168.100.3
Server:
192.168.100.1
This has 2 NIC's eth1 is local and eth2 is connected to the internet.
It could be nice to have a script, where you could specify, how much
bandwidth you want for a specific host on a network, like, PC1 has
10/100 MBit network, but only has 256/128, when surfing the net. PC2 has
the same network ofc, but 768/384 when surfing/downloading assuming the
shared connection is 1024/512.
I am currently running wondershaper1.1a which works prefectly, but i
wish, it could be more specific.
Could also be nice, if it would be someway possible to check on the
clients IP or MAC address to verify, if it's "really them". Like it's
only PC1 and PC2 who have access to the server in the 192.168.*.*
segment. Hope i make myself clear.
My server runs redhat 9 in cmd mode/no GUI.
Iptables installed script, as firewall.
I think a script as i described, could be very complex to write,
therefore i ask, whoever is here, for help.
Thank you all in advance.
Regards
Rune Johannesen
Denmark
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next reply other threads:[~2004-09-06 21:56 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-06 21:56 Cow [this message]
2004-09-07 11:08 ` [LARTC] HTB problem zytek
2004-09-07 20:28 ` Cow
2004-09-07 21:16 ` [LARTC] HTB Problem Cow
2004-09-07 21:18 ` [LARTC] HTB problem Cow
2004-09-07 21:53 ` Andreas Klauer
-- strict thread matches above, loose matches on Subject: below --
2001-12-11 2:46 yangrunhua
2001-12-11 9:21 ` bert hubert
2001-12-11 9:34 ` yangrunhua
2001-12-11 9:35 ` yangrunhua
2001-12-11 11:10 ` bert hubert
2001-12-12 5:47 ` yangrunhua
2001-12-12 10:02 ` yangrunhua
2001-12-12 11:40 ` Martin Devera
2001-12-12 13:50 ` bert hubert
2001-12-12 23:48 ` yangrunhua
2001-12-13 10:07 ` bert hubert
2002-06-26 0:22 ` [LARTC] htb problem Omar Armas
2002-06-26 0:32 ` Tomasz Wrona
2002-12-09 18:19 ` [LARTC] HTB Problem lartc
2002-12-09 18:57 ` Stef Coene
2003-01-23 22:47 ` [LARTC] HTB problem Jay Wineinger
2003-01-24 2:15 ` mingching.tiew
2003-01-24 2:39 ` Jay Wineinger
2003-06-12 19:21 ` [LARTC] htb problem Ratel
2003-06-12 19:23 ` Esteban
2003-06-12 19:35 ` Stef Coene
2003-06-12 20:04 ` Morten Isaksen
2003-06-12 20:51 ` Stef Coene
2003-06-12 20:54 ` Stef Coene
2003-06-12 21:15 ` Stef Coene
2003-06-14 21:46 ` terahz
2003-06-15 18:14 ` Stef Coene
2003-06-25 11:14 ` Ratel
2003-07-24 14:26 ` Delcho
2003-07-28 17:49 ` Stef Coene
2003-09-30 13:44 ` [LARTC] HTB Problem Guilherme Benkenstein
2003-09-30 19:59 ` Stef Coene
2003-12-02 23:08 ` [LARTC] HTB problem Mihai Tanasescu
2003-12-04 5:16 ` Mihai Tanasescu
2003-12-04 7:40 ` Catalin BOIE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001301c4945c$53c79f70$6e1464ab@palle' \
--to=cow@gline.us \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox