Re: [LARTC] htb problem

[Stef Coene <stef.coene@docum.org>]

On Thursday 12 June 2003 23:08, Esteban wrote:
> my set up is like this:
>
> #!/bin/bash
> DEV=eth1
>
> tc qdisc del dev $DEV root    2> /dev/null > /dev/null
> tc qdisc del dev $DEV ingress 2> /dev/null > /dev/null
>
> tc qdisc add dev $DEV root handle 1: htb
>
> tc class add dev $DEV parent 1: classid 1:1 htb rate 512kbit burst 6k
> tc class add dev $DEV parent 1:1 classid 1:10 htb rate 512kbit burst 6k
> prio 1 tc class add dev $DEV parent 1:1 classid 1:20 htb rate 50kbit burst
> 6k prio 3
>
> tc qdisc add dev $DEV parent 1:10 handle 10: sfq perturb 10
> tc qdisc add dev $DEV parent 1:20 handle 20: sfq perturb 10
>
> tc filter add dev $DEV protocol ip parent 1:0 prio 1 handle 0x1 fw flowid
> 1:20
>
>
> iptables -t mangle -A FORWARD -i eth1 -j MARK --set-mark 1
>
> os?? any idea?
Remove burst and prio parameter from your commands.  And make sure the sum of 
child rates <= parent rate.  In your case 512 + 50 >> 512.
And all non-classified packets have to go somewhere.  This can be done with 
the default parameter if you add the htb root disc or a catch all filter 
rule.

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/