* [LARTC] limited upload speed
@ 2004-10-04 8:23 emo terziev
2004-10-04 8:39 ` diab
2004-10-04 8:43 ` AW: " Stephan M. Ott
0 siblings, 2 replies; 3+ messages in thread
From: emo terziev @ 2004-10-04 8:23 UTC (permalink / raw)
To: lartc
HI all,
What is best way to be limited upload speed from LAN users. I read
that it is possible to be done with IMQ interface or with limitation
over gateway interface of router(eth0 in my "scheme"), but i cannot
chose what is preferred way and need from advice.
Please for advise, any example scripts or URL with tutorial are welcome :)
I read couple times Linux Traffic Control.
-----------------------------
Internet ISP --------| eth0 eth1 |------- LOCAL LAN
-----------------------------
Best regards
Emo
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [LARTC] limited upload speed
2004-10-04 8:23 [LARTC] limited upload speed emo terziev
@ 2004-10-04 8:39 ` diab
2004-10-04 8:43 ` AW: " Stephan M. Ott
1 sibling, 0 replies; 3+ messages in thread
From: diab @ 2004-10-04 8:39 UTC (permalink / raw)
To: lartc
we're doing it over the eth0.. i mean anything that comes from eth1
(upload) is shaped on eth0 when it would leave the router/shaper,
and downloads (coming in on eth0) are shaped when it gets router to
the users on eth1. Both are using HTB and it works just perfectly
fine.
-diab
-
diab
et> What is best way to be limited upload speed from LAN users. I read
et> that it is possible to be done with IMQ interface or with limitation
et> over gateway interface of router(eth0 in my "scheme"), but i cannot
et> chose what is preferred way and need from advice.
et> Please for advise, any example scripts or URL with tutorial are welcome :)
et> I read couple times Linux Traffic Control.
et> -----------------------------
et> Internet ISP --------| eth0 eth1 |------- LOCAL LAN
et> -----------------------------
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* AW: [LARTC] limited upload speed
2004-10-04 8:23 [LARTC] limited upload speed emo terziev
2004-10-04 8:39 ` diab
@ 2004-10-04 8:43 ` Stephan M. Ott
1 sibling, 0 replies; 3+ messages in thread
From: Stephan M. Ott @ 2004-10-04 8:43 UTC (permalink / raw)
To: lartc
If LARTC wasn't enough or too detailed, try Wondershaper.
http://omg.wp.gg/wshaper-howto/
Stephan
-----Ursprüngliche Nachricht-----
Von: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl] Im
Auftrag von emo terziev
Gesendet: Montag, 4. Oktober 2004 10:24
An: LARC
Betreff: [LARTC] limited upload speed
HI all,
What is best way to be limited upload speed from LAN users. I read
that it is possible to be done with IMQ interface or with limitation
over gateway interface of router(eth0 in my "scheme"), but i cannot
chose what is preferred way and need from advice.
Please for advise, any example scripts or URL with tutorial are welcome
:)
I read couple times Linux Traffic Control.
-----------------------------
Internet ISP --------| eth0 eth1 |-------
LOCAL LAN
-----------------------------
Best regards
Emo
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-10-04 8:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-04 8:23 [LARTC] limited upload speed emo terziev
2004-10-04 8:39 ` diab
2004-10-04 8:43 ` AW: " Stephan M. Ott
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox