Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
* Re: [LARTC]  script says RTNETLINK answers: Invalid argument
@ 2004-01-22  0:08 Damion de Soto
  0 siblings, 0 replies; only message in thread
From: Damion de Soto @ 2004-01-22  0:08 UTC (permalink / raw)
  To: lartc

Hi Javier,

1) don't 'reply' to messages if you are starting a new question/topic/thread
2) a relevent subject would help too.

> Hi, I have a litle problem with this code
> 
> I have two virtual ips (50 y 51) and this ips are the gateway
> 
> ip address add 192.168.0.50 dev eth1
> ip address add 192.168.0.51 dev eth1
> tc qdisc add dev eth1 root handle 1: cbq bandwidth 512kbit cell 8 avpkt \
> 1000  mpu 64
> tc class add dev eth1 parent 1:0 classid 1:1 cbq bandwidth 512kbit rate \
> 100kBit avpkt 1000 prio 5 bounded isolated allot 1514 weight 1 maxburst 21
> tc class add dev eth1 parent 1:0 classid 1:2 cbq bandwidth 512kbit rate \
> 100kbit avpkt 1000 prio 5 bounded isolated allot 1514 weight 1 maxburst 21
> tc filter add dev eth1 parent 1:0 protocol ip prio 5 handle 1: u32 divisor 1
> tc filter add dev eth1 parent 1:0 prio 5 u32 match ip src 192.168.0.50 \
> flowid 1:1
> tc filter add dev eth1 parent 1:0 prio 5 u32 match ip src 192.168.0.51 \
> flowid 1:2
> 
> and this scrip say:
> 
> RTNETLINK answers: Invalid argument
> RTNETLINK answers: Invalid argument
> RTNETLINK answers: Invalid argument
3)
You should really run the commands in the script one by one, so you can
find out exactly which ones are failing.

I would suggest that the 'tc qdisc .... cbq' commands are failing - probabaly because
you don't have the cbq module in your kernel.

but, it could be the filter commands (u32 module), or something else.

regards,

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     damion@snapgear.com
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2004-01-22  0:08 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-22  0:08 [LARTC] script says RTNETLINK answers: Invalid argument Damion de Soto

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox