Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
* [LARTC] ESFQ question
@ 2004-02-16 23:18 Mihai Tanasescu
  2004-02-29 10:14 ` Andy Furniss
  0 siblings, 1 reply; 2+ messages in thread
From: Mihai Tanasescu @ 2004-02-16 23:18 UTC (permalink / raw)
  To: lartc

Hello,

I've seen that esfq can do flows based on src/dest addresses.

I have a small lan with private ip's.
I guess that in my case esfq would only work for the download part as
for the upload esfq only sees the src address = the NAT address (as I
can figure from KPTD).


Is there any solution for this ?
(regarding esfq ..not by using iptables -j MARK and setting up different
classes for everyone....and using sfq)


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-02-29 10:14 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-16 23:18 [LARTC] ESFQ question Mihai Tanasescu
2004-02-29 10:14 ` Andy Furniss

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox