From: gypsy <gypsy@iswest.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] simple dual Internet connection setup not sending return
Date: Fri, 26 Nov 2004 05:40:06 +0000 [thread overview]
Message-ID: <41A6C1B6.7078DDB8@iswest.com> (raw)
In-Reply-To: <1101398346.8287.66.camel@pc>
"Brian J. Murrell" wrote:
>
> I have a very simple setup exactly as described in the HOWTO section "
> 4.2. Routing for multiple uplinks/providers".
>
> My iptables "nat" setup looks like this:
>
> Chain POSTROUTING (policy ACCEPT 364 packets, 26735 bytes)
> pkts bytes target prot opt in out source destination
> 258 19801 eth1_masq all -- * eth1 0.0.0.0/0 0.0.0.0/0
> 0 0 ppp0_masq all -- * ppp0 0.0.0.0/0 0.0.0.0/0
> Any ideas what I am doing wrong?
>
> b.
Guessing from the lack of any mention of KeepState in your iptables
setup, my guess is that you ignored the advice to vist Julian
Anastasov's web site.
Start with this:
http://www.geocities.com/mctiew/ffw/dual.htm
You should also google LARTC "Finally: A working case of two adsl load
balance". Read Ron Senykoff's post "load balance a file download across
two connections - success!".
gypsy
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2004-11-26 5:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-25 15:59 [LARTC] simple dual Internet connection setup not sending return packets Brian J. Murrell
2004-11-26 5:40 ` gypsy [this message]
2004-11-26 13:19 ` [LARTC] simple dual Internet connection setup not sending Brian J. Murrell
2004-11-26 14:39 ` Brian J. Murrell
2004-11-26 15:21 ` Brian J. Murrell
2004-11-26 16:44 ` Brian J. Murrell
2004-11-26 17:45 ` Brian J. Murrell
2004-11-26 21:27 ` [LARTC] simple dual Internet connection setup not sendingreturn gypsy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=41A6C1B6.7078DDB8@iswest.com \
--to=gypsy@iswest.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox