[LARTC] P2P

[LARTC] P2P

[Hugo Martinez]

Im getting into tc. How can I control P2P (peer to peer) traffic???
which filters??? any ideas???
Hugonik
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] P2P

[hiphin]

http://www.ipp2p.org/

if you find something better, let me know, I need to block that 

----- Original Message ----- 
From: "Hugo Martinez" <hugonik@gmail.com>
To: <lartc@mailman.ds9a.nl>
Sent: Friday, March 11, 2005 9:09 PM
Subject: [LARTC] P2P


> Im getting into tc. How can I control P2P (peer to peer) traffic???
> which filters??? any ideas???
> Hugonik
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] P2P

[erwan le doeuff]

Yes, there are different ways, but it will depends primarily on what
p2p software is used.
There is a lot of different ports used (by default) :
http://www.farrokhi.net/blog/archives/000233.html
And you can limit (hard way) the servers on which each peer to peers
client connect at the initialisation....but it don't works with client
without "server mode" (ex: Kademelia).
And for my advice..the best way....prioritize all your important
flows...and p2p will go through the default class or a better solution
with a sniffer and protocol analysis who mark packets.


Good luck Hugo



Erwan Le Doeuff
************************************************************
Project Manager of rcc project QoS HTB Power tool
http://www.rcc-project.net
************************************************************


On Fri, 11 Mar 2005 15:09:58 -0500, Hugo Martinez <hugonik@gmail.com> wrote:
> Im getting into tc. How can I control P2P (peer to peer) traffic???
> which filters??? any ideas???
> Hugonik
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] P2P

[hiphin]

Hi, erwan ...

since November 26, 2003, kazaa and others P2P software has evolved, ...not 
soo shure that simple rules will stop them?
is p2p sowtvare today totaly port independed, ... ?

----- Original Message ----- 
From: "erwan le doeuff" <erwan.ledoeuff@gmail.com>
To: "Hugo Martinez" <hugonik@gmail.com>
Cc: <lartc@mailman.ds9a.nl>
Sent: Friday, March 11, 2005 9:49 PM
Subject: Re: [LARTC] P2P


> Yes, there are different ways, but it will depends primarily on what
> p2p software is used.
> There is a lot of different ports used (by default) :
> http://www.farrokhi.net/blog/archives/000233.html
> And you can limit (hard way) the servers on which each peer to peers
> client connect at the initialisation....but it don't works with client
> without "server mode" (ex: Kademelia).
> And for my advice..the best way....prioritize all your important
> flows...and p2p will go through the default class or a better solution
> with a sniffer and protocol analysis who mark packets.
>
>
> Good luck Hugo
>
>
>
> Erwan Le Doeuff
> ************************************************************
> Project Manager of rcc project QoS HTB Power tool
> http://www.rcc-project.net
> ************************************************************
>
>
> On Fri, 11 Mar 2005 15:09:58 -0500, Hugo Martinez <hugonik@gmail.com> 
> wrote:
>> Im getting into tc. How can I control P2P (peer to peer) traffic???
>> which filters??? any ideas???
>> Hugonik
>> _______________________________________________
>> LARTC mailing list
>> LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>>
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
> 


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] P2P

[Pablo Solé]

mmm, it's mostly port indep., i use l7-filter (l7-filter.sourceforge.net)
for p2p filtering and it's working great for me.

cheers.

pablo.

----- Original Message ----- 
From: "hiphin" <hiphin@cat-net.co.yu>
To: <lartc@mailman.ds9a.nl>
Sent: Friday, March 11, 2005 7:42 PM
Subject: Re: [LARTC] P2P


> Hi, erwan ...
>
> since November 26, 2003, kazaa and others P2P software has evolved, ...not 
> soo shure that simple rules will stop them?
> is p2p sowtvare today totaly port independed, ... ?
>
> ----- Original Message ----- 
> From: "erwan le doeuff" <erwan.ledoeuff@gmail.com>
> To: "Hugo Martinez" <hugonik@gmail.com>
> Cc: <lartc@mailman.ds9a.nl>
> Sent: Friday, March 11, 2005 9:49 PM
> Subject: Re: [LARTC] P2P
>
>
>> Yes, there are different ways, but it will depends primarily on what
>> p2p software is used.
>> There is a lot of different ports used (by default) :
>> http://www.farrokhi.net/blog/archives/000233.html
>> And you can limit (hard way) the servers on which each peer to peers
>> client connect at the initialisation....but it don't works with client
>> without "server mode" (ex: Kademelia).
>> And for my advice..the best way....prioritize all your important
>> flows...and p2p will go through the default class or a better solution
>> with a sniffer and protocol analysis who mark packets.
>>
>>
>> Good luck Hugo
>>
>>
>>
>> Erwan Le Doeuff
>> ************************************************************
>> Project Manager of rcc project QoS HTB Power tool
>> http://www.rcc-project.net
>> ************************************************************
>>
>>
>> On Fri, 11 Mar 2005 15:09:58 -0500, Hugo Martinez <hugonik@gmail.com> 
>> wrote:
>>> Im getting into tc. How can I control P2P (peer to peer) traffic???
>>> which filters??? any ideas???
>>> Hugonik
>>> _______________________________________________
>>> LARTC mailing list
>>> LARTC@mailman.ds9a.nl
>>> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>>>
>> _______________________________________________
>> LARTC mailing list
>> LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>>
>
>
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>
> 

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] P2P

[Paul Hampson]

On Fri, Mar 11, 2005 at 03:09:58PM -0500, Hugo Martinez wrote:
> Im getting into tc. How can I control P2P (peer to peer) traffic???
> which filters??? any ideas???

I ended up with a combination of ipp2p and l7-filter, since they each
seemed to pick up stuff the other missed. I used them to jump to
connmark, and protected them in front with a connmark check so they
didn't waste time checking connections I already knew were P2P.

And then anything with connmark went to an IMQ, which I was able to
rate-shape depending on time of day.

I however found that I ran out of memory, and had to turn down the aging
of the conntrack list, on the theory that P2P traffic doesn't spend a
lot of time completely idle, being more inclined to short-lived but
active connections.

I did this on Debian Sarge, and it required kernel rebuilding, _and_ a
rebuild of the iptables package. I can post up the patches I used, if
you like. I haven't updated it in a fair while, so there's a reasonable
chance it's an older version of either ipp2p or l7-filter, or the IMQ
patch.

-- 
Paul "TBBle" Hampson, on an alternate email client.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Re: [LARTC] P2P

[Leandro Travaglia]

Well, i'm using IPP2P to identify P2P packets and FAIRNAT to shape 
them... and it's working great. My box is a Slackware 10.1.

http://www.metamorpher.de/fairnat/
http://www.ipp2p.org

Have a nice shapping...


Regards,


             LEANDRO TRAVAGLIA






On Fri, 11 Mar 2005 15:09:58 -0500, Hugo Martinez <hugonik@gmail.com> 
wrote:
Im getting into tc. How can I control P2P (peer to peer) traffic???
which filters??? any ideas???
Hugonik
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc