* [LARTC] Incorrect params
@ 2005-05-09 5:26 S.Mehdi Sheikhalishahi
2005-05-11 21:48 ` Andy Furniss
2005-05-16 16:33 ` Andy Furniss
0 siblings, 2 replies; 3+ messages in thread
From: S.Mehdi Sheikhalishahi @ 2005-05-09 5:26 UTC (permalink / raw)
To: lartc
Does tc understand irregular configurations?
For example in a configuration that parent class has ceil and rate
parameters less than child classes?
How can I limit output traffic of an interface?
I test it by limiting parent class traffic but it does not work.
--
Best Regards,
Bye.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] Incorrect params
2005-05-09 5:26 [LARTC] Incorrect params S.Mehdi Sheikhalishahi
@ 2005-05-11 21:48 ` Andy Furniss
2005-05-16 16:33 ` Andy Furniss
1 sibling, 0 replies; 3+ messages in thread
From: Andy Furniss @ 2005-05-11 21:48 UTC (permalink / raw)
To: lartc
S.Mehdi Sheikhalishahi wrote:
> Does tc understand irregular configurations?
> For example in a configuration that parent class has ceil and rate
> parameters less than child classes?
>
> How can I limit output traffic of an interface?
> I test it by limiting parent class traffic but it does not work.
>
I think this should work if you use htb.
Andy.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] Incorrect params
2005-05-09 5:26 [LARTC] Incorrect params S.Mehdi Sheikhalishahi
2005-05-11 21:48 ` Andy Furniss
@ 2005-05-16 16:33 ` Andy Furniss
1 sibling, 0 replies; 3+ messages in thread
From: Andy Furniss @ 2005-05-16 16:33 UTC (permalink / raw)
To: lartc
Andy Furniss wrote:
> S.Mehdi Sheikhalishahi wrote:
>
>> Does tc understand irregular configurations?
>> For example in a configuration that parent class has ceil and rate
>> parameters less than child classes?
>>
>> How can I limit output traffic of an interface?
>> I test it by limiting parent class traffic but it does not work.
>>
>
> I think this should work if you use htb.
>
> Andy.
I think I really ought to test before posting - the htb example in the
LARTC does have child classes whose rates exceed parent, but that was I
suppose old htb.
Testing shows that child rates are not capped by parent rate for htb 3.
Andy.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-05-16 16:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-05-09 5:26 [LARTC] Incorrect params S.Mehdi Sheikhalishahi
2005-05-11 21:48 ` Andy Furniss
2005-05-16 16:33 ` Andy Furniss
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox