Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Kristiadi Himawan <kristiadi_himawan@dtp.net.id>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Marking packets by mac addr using tc filter u32 match?
Date: Mon, 12 Dec 2005 10:19:34 +0000	[thread overview]
Message-ID: <439D4EB6.6060305@dtp.net.id> (raw)
In-Reply-To: <BAY107-F3151E7335EBD3E34F2786BD5440@phx.gbl>


It's also match to this kind of traffic ?

17:16:53.740978 arp who-has 192.43.165.29 tell 192.43.165.30
17:16:53.752482 arp reply 192.43.165.29 is-at 00:04:c1:b5:bd:f1
17:16:53.812889 arp who-has 192.43.162.194 tell 192.43.162.193
17:16:53.812922 arp reply 192.43.162.194 is-at 00:08:c7:c9:a3:17


Lee Sanders wrote:

>You haven't done a search on past posts...
>
>the u32 can be used to match any bit in the ip header. Before the ip header, 
>there is a frame header. In that frame header you can find the src and dst 
>mac address. You can trick the u32 filter in using the frame header if you 
>use negative offsets.
>
>Decimal Offset  Description
>-14:    DST MAC, 6 bytes
>-8:     SRC MAC, 6 bytes
>-2:     Eth PROTO, 2 bytes, eg. ETH_P_IP
>0:      Protocol header (IP Header)
>
>Where PPPP is the Eth Proto Code (from linux/include/linux/if_ether.h): 
>ETH_P_IP= IP = match u16 0x0800
>Where your MAC = M0M1M2M3M4M5
>
>Egress (match Dst MAC):
>... match u16 0xPPPP 0xFFFF at -2 match u32 0xM2M3M4M5 0xFFFFFFFF at -12 match 
>u16 0xM0M1 0xFFFF at -14
>
>Ingress (match Src MAC):
>... match u16 0xPPPP 0xFFFF at -2 match u16 0xM4M5 0xFFFF at -4 match u32 
>0xM0M1M2M3 0xFFFFFFFF at -8
>
>The below is simplistic but it works to demonstrate the above.
>
>tc qdisc add dev ppp0 root handle 1:0 htb default 20
>tc class add dev ppp0 parent 1:0 classid 1:1 htb rate 128kbit ceil 128kbit
>
>tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 64kbit ceil 128kbit
>tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 64kbit ceil 128kbit
>
>tc qdisc add dev ppp0 parent 1:10 handle 100: sfq perturb 10
>tc qdisc add dev ppp0 parent 1:20 handle 200: sfq perturb 10
>
># My Laptop
>tc filter add dev ppp0 parent 1:0 protocol ip prio 1 u32 match u16 0x0800 
>0xFFFF at -2 match u16 0xM4M5 0xFFFF at -4 match u32 0xM0M1M2M3  0xFFFFFFFF 
>at -8 flowid 1:10
># My Desktop
>tc filter add dev ppp0 parent 1:0 protocol ip prio 1 u32 match u16 0x0800 
>0xFFFF at -2 match u16 0xM4M5 0xFFFF at -4 match u32 0xM0M1M2M3  0xFFFFFFFF 
>at -8 flowid 1:20
># change the MAC's of course.
>
>tc -s -d class show dev ppp0
>tc -s -d qdisc show dev ppp0
>tc -s -d filter show dev ppp0
>
>There you have it.
>
>:L
>_______________________________________________
>LARTC mailing list
>LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
>  
>


_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

  parent reply	other threads:[~2005-12-12 10:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-12-10  1:07 [LARTC] Marking packets by mac addr using tc filter u32 match? Juan Pizarro
2005-12-10 17:12 ` gypsy
2005-12-11  7:46 ` brick
2005-12-11  8:28 ` Lee Sanders
2005-12-12 10:19 ` Kristiadi Himawan [this message]
2005-12-12 14:44 ` gypsy
2005-12-13  2:27 ` Kristiadi Himawan
2005-12-13 10:17 ` Michael Davidson
2005-12-13 10:50 ` Kristiadi Himawan
2005-12-13 15:04 ` gypsy
2005-12-15 14:45 ` gypsy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=439D4EB6.6060305@dtp.net.id \
    --to=kristiadi_himawan@dtp.net.id \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox