Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: gypsy <gypsy@iswest.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Marking packets by mac addr using tc filter u32 match?
Date: Mon, 12 Dec 2005 14:44:50 +0000	[thread overview]
Message-ID: <439D8CE2.69E1841E@iswest.com> (raw)
In-Reply-To: <BAY107-F3151E7335EBD3E34F2786BD5440@phx.gbl>

Kristiadi Himawan wrote:
> 
> It's also match to this kind of traffic ?
> 
> 17:16:53.740978 arp who-has 192.43.165.29 tell 192.43.165.30
> 17:16:53.752482 arp reply 192.43.165.29 is-at 00:04:c1:b5:bd:f1
> 17:16:53.812889 arp who-has 192.43.162.194 tell 192.43.162.193
> 17:16:53.812922 arp reply 192.43.162.194 is-at 00:08:c7:c9:a3:17

No.  The 'match u16 0x0800 0xffff' says to ignore ARP.

> Lee Sanders wrote:
> 
> >You haven't done a search on past posts...
> >
> >the u32 can be used to match any bit in the ip header. Before the ip header,
> >there is a frame header. In that frame header you can find the src and dst
> >mac address. You can trick the u32 filter in using the frame header if you
> >use negative offsets.
> >
> >Decimal Offset  Description
> >-14:    DST MAC, 6 bytes
> >-8:     SRC MAC, 6 bytes
> >-2:     Eth PROTO, 2 bytes, eg. ETH_P_IP
> >0:      Protocol header (IP Header)
> >
> >Where PPPP is the Eth Proto Code (from linux/include/linux/if_ether.h):
> >ETH_P_IP= IP = match u16 0x0800
> >Where your MAC = M0M1M2M3M4M5
> >
> >Egress (match Dst MAC):
> >... match u16 0xPPPP 0xFFFF at -2 match u32 0xM2M3M4M5 0xFFFFFFFF at -12 match
> >u16 0xM0M1 0xFFFF at -14
> >
> >Ingress (match Src MAC):
> >... match u16 0xPPPP 0xFFFF at -2 match u16 0xM4M5 0xFFFF at -4 match u32
> >0xM0M1M2M3 0xFFFFFFFF at -8
> >
> >The below is simplistic but it works to demonstrate the above.
> >
> >tc qdisc add dev ppp0 root handle 1:0 htb default 20
> >tc class add dev ppp0 parent 1:0 classid 1:1 htb rate 128kbit ceil 128kbit
> >
> >tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 64kbit ceil 128kbit
> >tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 64kbit ceil 128kbit
> >
> >tc qdisc add dev ppp0 parent 1:10 handle 100: sfq perturb 10
> >tc qdisc add dev ppp0 parent 1:20 handle 200: sfq perturb 10
> >
> ># My Laptop
> >tc filter add dev ppp0 parent 1:0 protocol ip prio 1 u32 match u16 0x0800
> >0xFFFF at -2 match u16 0xM4M5 0xFFFF at -4 match u32 0xM0M1M2M3  0xFFFFFFFF
> >at -8 flowid 1:10
> ># My Desktop
> >tc filter add dev ppp0 parent 1:0 protocol ip prio 1 u32 match u16 0x0800
> >0xFFFF at -2 match u16 0xM4M5 0xFFFF at -4 match u32 0xM0M1M2M3  0xFFFFFFFF
> >at -8 flowid 1:20
> ># change the MAC's of course.
> >
> >tc -s -d class show dev ppp0
> >tc -s -d qdisc show dev ppp0
> >tc -s -d filter show dev ppp0
> >
> >There you have it.
> >
> >:L
> >_______________________________________________
> >LARTC mailing list
> >LARTC@mailman.ds9a.nl
> >http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
> >
> >
> 
> _______________________________________________
> LARTC mailing list
> LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

  parent reply	other threads:[~2005-12-12 14:44 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-12-10  1:07 [LARTC] Marking packets by mac addr using tc filter u32 match? Juan Pizarro
2005-12-10 17:12 ` gypsy
2005-12-11  7:46 ` brick
2005-12-11  8:28 ` Lee Sanders
2005-12-12 10:19 ` Kristiadi Himawan
2005-12-12 14:44 ` gypsy [this message]
2005-12-13  2:27 ` Kristiadi Himawan
2005-12-13 10:17 ` Michael Davidson
2005-12-13 10:50 ` Kristiadi Himawan
2005-12-13 15:04 ` gypsy
2005-12-15 14:45 ` gypsy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=439D8CE2.69E1841E@iswest.com \
    --to=gypsy@iswest.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox