From: gypsy <gypsy@iswest.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Advanced Routing and Secondary ip address in eth0
Date: Wed, 21 Dec 2005 04:50:31 +0000 [thread overview]
Message-ID: <43A8DF17.FC4B1060@iswest.com> (raw)
In-Reply-To: <43A85B7A.90808@netwall.com.br>
Leonardo Borda wrote:
>
> Hello,
>
> I have configured advanced routing with success using three (03)
> network adapters ( ETH0, ETH1 and ETH2).
> Now I have to configure an addittion range in the same Interface
> ETH0 ( another internet ip range address ), so I would like to have TWO
> different ranges at the same ETHERNET CARD ( in this case ETH0 ) AND
> having advanced routing running it.
> I Did the same configurations as I already done it before and it is
> not working. When testing through the secondary ip address the packets
> get out from the wrong default gateway, however testing from primary
> range I am able to route.
>
> Is it possible to do advanced routing having in the same Interface
> TWO different ip range address?
>
> Somebody had done this somewhere?
>
> Thanks in advanced
>
> --
> Atenciosamente,
>
> Leonardo Borda
Leonardo,
Have you Yahooed/googled this? IIRC, I came across several pages
describing your desired setup while trying to decide how to deal with 3
NICs and two different IPS (therefore separate nets on each NIC). Again
IIRC, I rejected these because they were not the correct solution for
me.
Sorry I can't be more help, but I do think your solution is "out there".
--
gypsy
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
next prev parent reply other threads:[~2005-12-21 4:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-20 19:28 [LARTC] Advanced Routing and Secondary ip address in eth0 Leonardo Borda
2005-12-21 4:50 ` gypsy [this message]
2005-12-21 7:29 ` Denis Ovsienko
2005-12-21 13:53 ` Leonardo Borda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43A8DF17.FC4B1060@iswest.com \
--to=gypsy@iswest.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox