* [LARTC] Simple set up to shape traffic...
@ 2006-09-08 19:24 John Clark
0 siblings, 0 replies; only message in thread
From: John Clark @ 2006-09-08 19:24 UTC (permalink / raw)
To: lartc
I looked and found a 'very simple' command sequence to shape traffic to
a specific
host. However, I 'cribbed' the command sequence from a online tutoral
from 'somewhere'.
I now have lost the example, and my altered sequence.
the command I am getting an 'RTNETLINK' Invalid argument error from is:
tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 3700kbit
I don't think I used this particular set of options previously. Somehow
I think I
was using the sfq rather than the cbq.
The goal that I have at the moment is to limit the bandwidth of data
sent to a
particular host. I had this working but seem to have lost a specific
parameter sequence.
Thanks
John Clark
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-09-08 19:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-09-08 19:24 [LARTC] Simple set up to shape traffic John Clark
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox