Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
* [LARTC] Problem with the tc statistcis
@ 2007-05-26  8:29 Yang Su
  0 siblings, 0 replies; only message in thread
From: Yang Su @ 2007-05-26  8:29 UTC (permalink / raw)
  To: lartc

I had a linux wireless router. I would like to monitor the queue lengh
of the wireless interface. By default, the wifi0 interface is with
pfifo_fast qdisc which does not report backlog packet. I replaced
pfifo_fast with pfifo:
'tc qdisc replace dev wifi0 root pfifo'
Then I use iperf to send UDP pkts faster than the interface can handle
but when I read the qdisc, the result is like:

qdisc pfifo 8007: limit 10p
Sent 46249560 bytes 30600 pkts (dropped 0, overlimits 0)

It is really strange, because over 80% of packets lost is observed by
application layer but by qdisc, there is no packet dropped at all and no
backlog. Any hints for this result?

Thank you,

Yang Su
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2007-05-26  8:29 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-26  8:29 [LARTC] Problem with the tc statistcis Yang Su

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox