Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: Martin Devera <devik@cdi.cz>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Shaping incoming traffic?
Date: Tue, 20 Nov 2001 09:12:46 +0000	[thread overview]
Message-ID: <marc-lartc-100624751625882@msgid-missing> (raw)
In-Reply-To: <marc-lartc-100608970116427@msgid-missing>

Exactly. Ingres is needed when packet end its trip inside
Linux box (so there is no queue to place it to).

devik

On Mon, 19 Nov 2001, Kristian Hoffmann wrote:

> Am I correct in assuming that you only need to use the Ingres qdisc if
> you're not the router between two networks (namely the internet and your
> customers).  We have CBQ/TBF setup for our incoming traffic (internet to
> customer).  Can the same rules be applied in reverse for outgoing traffic
> (customer to internet)?
> 
> Thanks,
> 
> Kristian Hoffmann
> PC-InTOUCH/FireToWire System Administrator
> khoff@pc-intouch.com
> ---
> 
> On Sun, 18 Nov 2001, Martin Devera wrote:
> 
> > It is nerly FAQ. You can use Ingres qdisc to do it and attach
> > policers here.
> > It would be nice to be able to attach every qdisc to incoming interface
> > but it is not possible. There is always problem - when packet already
> > hitted your box why do you want to drop/delay it ?
> > You should to do it on outgoing side of link to your box ..
> > 
> > When you are router (not app box) then you can shape both directions.
> > On your virtual-host note. I already did patch (called IMQ) which 
> > implements virtual inteface allowing to attach single qdisc to multiple
> > outgoing devices.
> > It should be relatively easy to extend it to catch incoming packets
> > too - only there is no time to do it.
> > 
> > best regards, devik
> > 
> > On 19 Nov 2001, Manfred Bartz wrote:
> > 
> > > 
> > > I would like to differentiate incoming traffic streams to guarantee
> > > minimum bandwidth to some services.  However, as per the
> > > Adv-Routing-HOWTO it appears that only outgoing traffic can be shaped.
> > > Is this correct or is there a way of shaping incoming traffic?
> > > 
> > > The problem could possibly be overcome if there is a way of routing 
> > > traffic through a virtual host.  Any tips on how to go about that?
> > > 
> > > -- 
> > > Manfred
> > > 
> > > 
> > > _______________________________________________
> > > LARTC mailing list / LARTC@mailman.ds9a.nl
> > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
> > > 
> > > 
> > 
> > 
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
> > 
> 
> 
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
> 
> 


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

      parent reply	other threads:[~2001-11-20  9:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-11-18 13:21 [LARTC] Shaping incoming traffic? Manfred Bartz
2001-11-18 13:48 ` Martin Devera
2001-11-18 14:17 ` Manfred Bartz
2001-11-18 23:50 ` Michael T. Babcock
2001-11-19 10:42 ` Fredrik Björk
2001-11-19 11:07 ` devik
2001-11-20  7:12 ` Kristian Hoffmann
2001-11-20  9:12 ` Martin Devera [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-100624751625882@msgid-missing \
    --to=devik@cdi.cz \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox