From: David Koski <david@kosmosisland.com>
To: lartc@vger.kernel.org
Subject: [LARTC] proxy arp and routing
Date: Fri, 01 Feb 2002 22:41:49 +0000 [thread overview]
Message-ID: <marc-lartc-101260332616001@msgid-missing> (raw)
Hello,
Given the network map below, I am able to ping any ip on all networks from the
linux box. However, from the cisco router, I cannot ping past eth1 on the linux
box. The reverse is also true; I cannot ping past eth0 from a host on LAN.
proxy-arp is enabled on the linux box and the route to a.b.c.0/24 is added to
the cisco router. I haven't a clue why either way, I can only get to the far
side of the linux box but no further.
On second thought, maybe this is not an application for proxy-arp. Your
thoughts are appreciated.
T1 to ISP
|
| /30 net
|
+----------------+
| cisco router |
+----------------+
| FastEthernet0/0
| a.b.c.1/28
|
(possible switch/hub here in future)
(ip range = a.b.c.1-15)
|
| a.b.c.2/28
| eth0
+----------------+
| |
| eth1 |---a.b.c.16/24-public-net-----> LAN
| | (ip range = a.b.c.16-255)
| linux box |
| eth2 |---192.168.1.0/24-- *
| | * (not revelant to discussion)
+----------------+
David Koski
david@KosmosIsland.com
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next reply other threads:[~2002-02-01 22:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-01 22:41 David Koski [this message]
2002-02-02 5:13 ` [LARTC] proxy arp and routing David Koski
2002-02-02 17:44 ` David Koski
2002-02-02 19:19 ` David Koski
2002-02-04 14:59 ` Ard van Breemen
2002-02-04 17:58 ` David Koski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101260332616001@msgid-missing \
--to=david@kosmosisland.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox