From: David Koski <david@kosmosisland.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] proxy arp and routing
Date: Sat, 02 Feb 2002 05:13:33 +0000 [thread overview]
Message-ID: <marc-lartc-101262685732129@msgid-missing> (raw)
In-Reply-To: <marc-lartc-101260332616001@msgid-missing>
I am not sure what you mean by that but ifconfig shows the correct
ip/netmask/broadcast for each ip. Did I miss something?
David
On Fri, 1 Feb 2002 23:27:28 -0500
"Admin Nplus" <admin@nplus.ca> wrote:
> did you tell the linux box what ip is where on what side ?
>
> ----- Original Message -----
> From: "David Koski" <david@kosmosisland.com>
> To: "LARTC" <lartc@mailman.ds9a.nl>
> Sent: Friday, February 01, 2002 5:41 PM
> Subject: [LARTC] proxy arp and routing
>
>
> > Hello,
> >
> > Given the network map below, I am able to ping any ip on all networks from
> the
> > linux box. However, from the cisco router, I cannot ping past eth1 on the
> linux
> > box. The reverse is also true; I cannot ping past eth0 from a host on
> LAN.
> > proxy-arp is enabled on the linux box and the route to a.b.c.0/24 is added
> to
> > the cisco router. I haven't a clue why either way, I can only get to the
> far
> > side of the linux box but no further.
> >
> > On second thought, maybe this is not an application for proxy-arp. Your
> > thoughts are appreciated.
> >
> > T1 to ISP
> > |
> > | /30 net
> > |
> > +----------------+
> > | cisco router |
> > +----------------+
> > | FastEthernet0/0
> > | a.b.c.1/28
> > |
> > (possible switch/hub here in future)
> > (ip range = a.b.c.1-15)
> > |
> > | a.b.c.2/28
> > | eth0
> > +----------------+
> > | |
> > | eth1 |---a.b.c.16/24-public-net-----> LAN
> > | | (ip range = a.b.c.16-255)
> > | linux box |
> > | eth2 |---192.168.1.0/24-- *
> > | | * (not revelant to discussion)
> > +----------------+
> >
> > David Koski
> > david@KosmosIsland.com
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
> >
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
next prev parent reply other threads:[~2002-02-02 5:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-01 22:41 [LARTC] proxy arp and routing David Koski
2002-02-02 5:13 ` David Koski [this message]
2002-02-02 17:44 ` David Koski
2002-02-02 19:19 ` David Koski
2002-02-04 14:59 ` Ard van Breemen
2002-02-04 17:58 ` David Koski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-101262685732129@msgid-missing \
--to=david@kosmosisland.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox