* [LARTC] Syn Flood Protection
@ 2002-04-18 9:42 Thomas Braun
0 siblings, 0 replies; only message in thread
From: Thomas Braun @ 2002-04-18 9:42 UTC (permalink / raw)
To: lartc
Hallo Group,
i want to implement a syn Flood Protection on our linux Router.
on our Cisco we have this Access-list and rat-limit
rate-limit input access-group 190 128000 128000 128000 conform-action transmit exceed-action drop
access-list 190 deny tcp any any established
access-list 190 permit tcp any any
access-list 190 deny ip any any
now i was trying to wrote the same config with tc
iptables -A PREROUTING -i $uplinkdev -t mangle -p tcp --syn -j MARK --set-mark 1
tc qdisc add dev $uplinkdev handle ffff: ingress
tc filter add dev $uplinkdev parent ffff: protocol ip prio 50 handle 1 fw police rate 128kbit burst 10 mtu 15k drop flowid :1
But many from our Customers can't connect to our Webservers.
what is wrong on my config?
cu thomas braun
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-04-18 9:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-04-18 9:42 [LARTC] Syn Flood Protection Thomas Braun
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox