Re[2]: [LARTC] (no subject)

Re[2]: [LARTC] (no subject)

[Waters]

Hello Stef,

Saturday, April 20, 2002, 10:56:54 PM, you wrote:

SC> On Saturday 20 April 2002 15:10, Mihai RUSU wrote:
>> On Sat, 20 Apr 2002, Waters wrote:
>> > Hello lartc,
>> >
>> > I've got Linux Slackware 8.0, I need to compile IPROUTE2, but it gives
>> > out an error. What modules should be enabled? Or what should I compile
>> > into kernel?
>>
>> Hi
>>
>> First of all what kernel sources do you have in /usr/src/linux ?
>> Second did you issued at least a make *config ?
>> Then what version of iproute are trying to compile ?
SC> Last question : what was the error ?

ok, i finaly did it, i found the newest version, and i have compiled
it, but trying to add some default commands:

# tc qdisc add dev eth1 root handle 1: cbq bandwidth 10Mbit allot 1514 cell 8 avpkt 1000 mpu 64
RTNETLINK answers: Invalid argument

any ideas?

-- 
Best regards,
 Waters                            mailto:waters@inbox.lv

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: Re[2]: [LARTC] (no subject)

[Stef Coene]

> ok, i finaly did it, i found the newest version, and i have compiled
> it, but trying to add some default commands:
>
> # tc qdisc add dev eth1 root handle 1: cbq bandwidth 10Mbit allot 1514 cell
> 8 avpkt 1000 mpu 64 RTNETLINK answers: Invalid argument
>
> any ideas?
Are you running a kernel with CBQ support?  And if you are using modules, are 
you sure the modules are loaded ?

Stef
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/