Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
* [LARTC] zebra documentation
@ 2002-05-23  7:44 Andreani Luca
  2002-05-24  2:23 ` Leonardo Balliache
  0 siblings, 1 reply; 2+ messages in thread
From: Andreani Luca @ 2002-05-23  7:44 UTC (permalink / raw)
  To: lartc

Hi,

I'm looking for zebra documentation.
In particular I need an introduction to the basic features of the ripd and
other daemons.
Untill now the only reference I found is the "GNU zebra manual for zebra
0.88" in html format (by P.S. Veselov).
There is anything else?
Some PS/PDF tutorial?

Many thanks for you attention.

Luca Andreani
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [LARTC] zebra documentation
  2002-05-23  7:44 [LARTC] zebra documentation Andreani Luca
@ 2002-05-24  2:23 ` Leonardo Balliache
  0 siblings, 0 replies; 2+ messages in thread
From: Leonardo Balliache @ 2002-05-24  2:23 UTC (permalink / raw)
  To: lartc

Hi Andreani:

Nothing. Just some bad written and worst explained document out there in 
the web.

I have an old html document about gated (routing daemon older than zebra: 
rip, rip ii, ospf, isis, etc). If you want it e-mail me and I attached to 
you. Also for protocol information try with cisco at 
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/index.htm.

Best regards,

Leonardo.-




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2002-05-24  2:23 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-05-23  7:44 [LARTC] zebra documentation Andreani Luca
2002-05-24  2:23 ` Leonardo Balliache

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox