Re: [LARTC] HTB on kernel 2.4.20

["Rimas" <rmocius@auste.elnet.lt>]

Stef,

When I tried to use htb.init script I just took example files:
eth0, eth0-2.root, eth0-2:10.www, eth0-2:20.smtp, eth0-2:30.dfl
But htb.init makes nothing.
If I use the htb.init script and execute that show command, the counters not
increasing.
Because there are no created classes.

Best regards

Rimas


----- Original Message ----- 
From: "Stef Coene" <stef.coene@docum.org>
To: "Rimas" <rmocius@auste.elnet.lt>; <LARTC@mailman.ds9a.nl>
Sent: Thursday, December 05, 2002 8:03 PM
Subject: Re: [LARTC] HTB on kernel 2.4.20


> On Thursday 05 December 2002 19:40, Rimas wrote:
> > Stef,
> >
> > Then I use tc -s -d class show dev eth0 - yes the sent counters are
> > increasing.
> > myshaper script have missed ( iptables -t mangle -A MYSHAPER-IN -j
> > IMQ "this part --todev 1")  and so I can shape incooming and outgoing
> > trafic without any problems.
> > Thank you for the command tc -s -d class show dev eth0.
> >
> > But I still cannot use htb.init script (like you know it is much easer
to
> > use it, write rules)
> > How I may check that problem?
> If you use the htb.init script and execute that show command, are the
counters
> increasing ??
> I think it's more a bad configuration then a htb problem :)
>
> Stef
>
> -- 
>
> stef.coene@docum.org
>  "Using Linux as bandwidth manager"
>      http://www.docum.org/
>      #lartc @ irc.oftc.net
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/