Re: [LARTC] HTB on kernel 2.4.20

["Rimas" <rmocius@auste.elnet.lt>]

Stef,

Then I use tc -s -d class show dev eth0 - yes the sent counters are
increasing.
myshaper script have missed ( iptables -t mangle -A MYSHAPER-IN -j
IMQ "this part --todev 1")  and so I can shape incooming and outgoing trafic
without any problems.
Thank you for the command tc -s -d class show dev eth0.

But I still cannot use htb.init script (like you know it is much easer to
use it, write rules)
How I may check that problem?

Best Regards

Rimas



----- Original Message ----- 
From: "Stef Coene" <stef.coene@docum.org>
To: "Rimas" <rmocius@auste.elnet.lt>; <LARTC@mailman.ds9a.nl>
Sent: Thursday, December 05, 2002 5:04 PM
Subject: Re: [LARTC] HTB on kernel 2.4.20


> On Thursday 05 December 2002 12:18, Rimas wrote:
> > Hi,
> >
> >
> > I have a Linux box with kernel-2.4.20 HTB, IMQ patch + iptables-1.2.7a
with
> > IMQ and patched tc.
> > I tried to use htb.init script, wondershaper and myshaper
> >
(http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/ADSL
> >- Bandwidth-Management-HOWTO.html).
> > And seems to be the htb doesn't work (doesn't shape a trafic at all)
> > I get no error messages.
> >
> > How I may check it what is wrong?
> You can do tc -s -d class show dev eth0 and examine the sent counters.
Are
> they increasing ???
>
> Stef
>
>
> -- 
>
> stef.coene@docum.org
>  "Using Linux as bandwidth manager"
>      http://www.docum.org/
>      #lartc @ irc.oftc.net
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/