Linux Advanced Routing and Traffic Control list
 help / color / mirror / Atom feed
From: "Mindaugas Riauba" <mind@bi.lt>
To: lartc@vger.kernel.org
Subject: [LARTC] Traffic is exceeding limits
Date: Wed, 18 Dec 2002 12:23:13 +0000	[thread overview]
Message-ID: <marc-lartc-104021428723515@msgid-missing> (raw)


  I'm trying to setup traffic shaping for a customer.
Machine is RedHat 7.3 with kernel-smp-2.4.18-18.7.x.
HZQ2.

  But when I try to load link (using netcat and discard /
chargen services) bytes count (tc -s qdisc show, sfq qdisc)
goes quite well over 512kbit (~560kbit). With UDP I can
even go over 1mbit.

  What can be done to ensure tighter limits?

  Thanks,

  Mindaugas

  burst and cburst were set by tc and equals 2175b. r2q = 10.

  No more tc rules exists now.

$TC qdisc del dev eth0 root
$TC qdisc del dev eth1 root

$TC qdisc add dev eth0 root handle 1: htb
$TC qdisc add dev eth1 root handle 1: htb

$TC class add dev eth0 parent 1: classid 1:200 htb rate 512kbit
$TC class add dev eth1 parent 1: classid 1:200 htb rate 512kbit

$TC qdisc add dev eth0 parent 1:200 handle 200: sfq perturb 10
$TC qdisc add dev eth1 parent 1:200 handle 200: sfq perturb 10

$TC filter add dev eth0 parent 1: protocol ip prio 1 u32 match ip src $ip
flowid 1:200
$TC filter add dev eth1 parent 1: protocol ip prio 1 u32 match ip dst $ip
flowid 1:200

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

             reply	other threads:[~2002-12-18 12:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-18 12:23 Mindaugas Riauba [this message]
2002-12-18 21:40 ` [LARTC] Traffic is exceeding limits Stef Coene

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-104021428723515@msgid-missing \
    --to=mind@bi.lt \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox