From: Stef Coene <stef.coene@docum.org>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Traffic is exceeding limits
Date: Wed, 18 Dec 2002 21:40:36 +0000 [thread overview]
Message-ID: <marc-lartc-104024784730875@msgid-missing> (raw)
In-Reply-To: <marc-lartc-104021428723515@msgid-missing>
On Wednesday 18 December 2002 13:23, Mindaugas Riauba wrote:
> I'm trying to setup traffic shaping for a customer.
> Machine is RedHat 7.3 with kernel-smp-2.4.18-18.7.x.
> HZ=512.
>
> But when I try to load link (using netcat and discard /
> chargen services) bytes count (tc -s qdisc show, sfq qdisc)
> goes quite well over 512kbit (~560kbit). With UDP I can
> even go over 1mbit.
I did the same. I used ttcp and recorded the bandwidth I could use. But my
results where nearly perfetc (I recorder the bandwidth on a very log period).
Recently I tried it with upd data but I had some strange results. 1 UDP data
stream was shaped perfectly, but 2 UPD data streams can use the full link
bandwidth. I still have to test ir further.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2002-12-18 21:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-18 12:23 [LARTC] Traffic is exceeding limits Mindaugas Riauba
2002-12-18 21:40 ` Stef Coene [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-104024784730875@msgid-missing \
--to=stef.coene@docum.org \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox