* [LARTC] Ingress qdisc functional?
@ 2002-12-30 20:32 Brad Davidson
2002-12-30 21:44 ` Stef Coene
0 siblings, 1 reply; 2+ messages in thread
From: Brad Davidson @ 2002-12-30 20:32 UTC (permalink / raw)
To: lartc
Hello all!
I've just subscribed to the list after looking around on Google and checking out
the TC source code a bit. Here's my situation:
I have a megabit DSL line that I'd like to set up some shaping on. I only have
access to the linux router on my (client) end. Because of that, I was looking to
do some shaping using the 'ingress' qdisc. However, I'm getting mixed messages
as to whether or not it works. The source of q_ingress.c from ss020116 says in
the header:
--
* This is here just in case it is needed
* useless right now; might be useful in the future
--
Which leads me to believe that it's not really working, allthough I've seen
posts claiming that it is. Can I get some verification either way, or possibly a
newer version of the tools that I'm missing?
Thanks!
-Brad
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] Ingress qdisc functional?
2002-12-30 20:32 [LARTC] Ingress qdisc functional? Brad Davidson
@ 2002-12-30 21:44 ` Stef Coene
0 siblings, 0 replies; 2+ messages in thread
From: Stef Coene @ 2002-12-30 21:44 UTC (permalink / raw)
To: lartc
On Monday 30 December 2002 22:19, Brad Davidson wrote:
> Hello all!
>
> I've just subscribed to the list after looking around on Google and
> checking out the TC source code a bit. Here's my situation:
>
> I have a megabit DSL line that I'd like to set up some shaping on. I only
> have access to the linux router on my (client) end. Because of that, I was
> looking to do some shaping using the 'ingress' qdisc. However, I'm getting
> mixed messages as to whether or not it works. The source of q_ingress.c
> from ss020116 says in the header:
> --
> * This is here just in case it is needed
> * useless right now; might be useful in the future
> --
> Which leads me to believe that it's not really working, allthough I've seen
> posts claiming that it is. Can I get some verification either way, or
> possibly a
> newer version of the tools that I'm missing?
Ingress is working.
But if you have a dedicated router (I mean no proxy or so on it), you can use
both interfaces for shaping so you can use egress qdiscs like cbq or htb who
are much more powerfull then the ingress qdisc.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-12-30 21:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-12-30 20:32 [LARTC] Ingress qdisc functional? Brad Davidson
2002-12-30 21:44 ` Stef Coene
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox