* [LARTC] Help Needed with TC qdisc and filters
@ 2003-01-20 9:00 Andreas Wright
2003-01-20 9:48 ` S Mohan
2003-01-20 13:36 ` Andreas Wright
0 siblings, 2 replies; 3+ messages in thread
From: Andreas Wright @ 2003-01-20 9:00 UTC (permalink / raw)
To: lartc
[-- Attachment #1: Type: text/plain, Size: 1065 bytes --]
Hello ,
I am trying to use tc to do the following ..on the interface(eth0) I want to give priority to to packets coming from a specific IP address 1.2.3.4 over packets from IP address 1.2.3.5 .
I would like to know if the following setup would work with PRIO qdisc.
tc qdisc add dev eth0 root handle 10 : prio
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.5/32 flowid 10:2
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.5/32 flowid 10:2
Can I test this setup by using flooding ping from 1.2.3.4 and 1.2.3.5 to the machine configured with tc ?
I expected that pings from 1.2.3.5 will be dropped giving priority to 1.2.3.4
Looking forward to your input,
Andreas.
---------------------------------
With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits your needs
[-- Attachment #2: Type: text/html, Size: 1342 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [LARTC] Help Needed with TC qdisc and filters
2003-01-20 9:00 [LARTC] Help Needed with TC qdisc and filters Andreas Wright
@ 2003-01-20 9:48 ` S Mohan
2003-01-20 13:36 ` Andreas Wright
1 sibling, 0 replies; 3+ messages in thread
From: S Mohan @ 2003-01-20 9:48 UTC (permalink / raw)
To: lartc
Normally, either src or dst from an internal ip alone will be effective on
an interface as we can shape only outgoing traffic. Thus if eth0 is the
internal LAN interface for 1.2.3.x network, only dst will be effective. If
eth0 is the gateway to the other side with say eth1 as the internal
interface to 1.2.3.x LAN, then src will be effective. You will need to apply
src and dst to different interfaces to achieve what you want.
e.g. eth0 is WAN side and eth1 is LAN side then
tc qdisc add dev eth0 root handle 10: prio
tc class add dev eth0 parent 10: classid 10:1 htb rate 512kbit ceil 1Mbit
tc class add dev eth0 parent 10:1 classid 10:10 htb rate 512kbit ceil 1Mbit
tc class add dev eth0 parent 10: classid 10:20 htb rate 2kbit ceil 1Mbit
tc filter add dev eth0 parent 10:1 protocol ip prio 1 u32 \
match ip src 1.2.3.4/32 flowid 10:10
tc filter add dev eth0 parent 10:1 protocol ip prio 1 u32 \
match ip src 1.2.3.5/32 flowid 10:20
tc qdisc add dev eth1 root handle 11: prio
tc class add dev eth1 parent 11: classid 11:1 htb rate 512kbit ceil 1Mbit
tc class add dev eth1 parent 11:1 classid 11:10 htb rate 512kbit ceil 1Mbit
tc class add dev eth1 parent 11:1 classid 11:20 htb rate 2kbit ceil 1Mbit
tc filter add dev eth1 parent 11:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.4/32 flowid 11:10
tc filter add dev eth1 parent 11:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.5/32 flowid 11:20
You had not mentioned classes earlier. These are needed and filters will
assign traffic to classes. Thus traffic to and from 1.2.3.5/24 has 2kbit
borrowable upto a max of 1Mbit while 1.2.3.4/24 has 512kbit borrowable upto
1Mbit. Thus 1.2.3.4 will get 512/514 portion of the bandwidth always. if no
traffic comes from 1.2.3.4, 1.2.3.5 will get full bandwidth.
I gave rate as 512 and ceil as 1mbit assuming WAN is a 1Mbit interface
reserving 512 for ingress and 512 for egress. In case incoming traffic does
not take 512, the outgoing traffic can borrow that bandwidth upto max link
capacity.
HTH
Mohan
-----Original Message-----
From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl]On
Behalf Of Andreas Wright
Sent: 20 January 2003 14:30
To: LARTC@mailman.ds9a.nl
Subject: [LARTC] Help Needed with TC qdisc and filters
Hello ,
I am trying to use tc to do the following ..on the interface(eth0) I want to
give priority to to packets coming from a specific IP address 1.2.3.4 over
packets from IP address 1.2.3.5 .
I would like to know if the following setup would work with PRIO qdisc.
tc qdisc add dev eth0 root handle 10 : prio
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.5/32 flowid 10:2
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.5/32 flowid 10:2
Can I test this setup by using flooding ping from 1.2.3.4 and 1.2.3.5 to the
machine configured with tc ?
I expected that pings from 1.2.3.5 will be dropped giving priority to
1.2.3.4
Looking forward to your input,
Andreas.
With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits
your needs
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [LARTC] Help Needed with TC qdisc and filters
2003-01-20 9:00 [LARTC] Help Needed with TC qdisc and filters Andreas Wright
2003-01-20 9:48 ` S Mohan
@ 2003-01-20 13:36 ` Andreas Wright
1 sibling, 0 replies; 3+ messages in thread
From: Andreas Wright @ 2003-01-20 13:36 UTC (permalink / raw)
To: lartc
[-- Attachment #1: Type: text/plain, Size: 1552 bytes --]
Hello
I was thinking Prio qdisc has 3 classes by default.Hence it should be possible to enque the packets into one of these classes using tc filters as shown below.Can anyone clarify this
Regards,
Anil
From: lartc-admin@mailman.ds9a.nl [mailto:lartc-admin@mailman.ds9a.nl]On
Behalf Of Andreas Wright
Sent: 20 January 2003 14:30
To: LARTC@mailman.ds9a.nl
Subject: [LARTC] Help Needed with TC qdisc and filters
Hello ,
I am trying to use tc to do the following ..on the interface(eth0) I want to
give priority to to packets coming from a specific IP address 1.2.3.4 over
packets from IP address 1.2.3.5 .
I would like to know if the following setup would work with PRIO qdisc.
tc qdisc add dev eth0 root handle 10 : prio
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.4/32 flowid 10:1
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip src 1.2.3.5/32 flowid 10:2
tc filter add dev eth0 parent 10:0 protocol ip prio 1 u32 \
match ip dst 1.2.3.5/32 flowid 10:2
Can I test this setup by using flooding ping from 1.2.3.4 and 1.2.3.5 to the
machine configured with tc ?
I expected that pings from 1.2.3.5 will be dropped giving priority to
1.2.3.4
Looking forward to your input,
Andreas.
With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits
your needs
---------------------------------
With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits your needs
[-- Attachment #2: Type: text/html, Size: 1831 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-01-20 13:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-20 9:00 [LARTC] Help Needed with TC qdisc and filters Andreas Wright
2003-01-20 9:48 ` S Mohan
2003-01-20 13:36 ` Andreas Wright
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox