* [LARTC] problem with iproute and TEQL over predefinited tables
@ 2003-01-24 16:05 Claudio Agosti
0 siblings, 0 replies; only message in thread
From: Claudio Agosti @ 2003-01-24 16:05 UTC (permalink / raw)
To: lartc
hi, I've encrountred some problem with iproute2...
I'm building a router with kernel 2.4.20 but my script fail when I try to do
a load balancing over a specific traffic, how explained on LARTC for
balance the access between more link we should simple:
ip route add default scope global nexthop via IP1 dev ETH0 weight 1 \
nexthop via IP2 dev ETH1 weight 1
for specific traffic I'm marking some packets with mangle table and --set-mark,
I've make iproute to lookup for marked packet and assign them over my specific
table, but my command line for set routing:
ip route add table http nexthop via IP1 dev ETH0 weight 1 \
nexthop via IP2 dev ETH1 weight 1
fail, but I did't undestound why...
are there some suggestions :) ?
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-01-24 16:05 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-24 16:05 [LARTC] problem with iproute and TEQL over predefinited tables Claudio Agosti
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox