* [LARTC] Multipath routing with different bandwidth and cost
@ 2003-01-29 11:04 Benjamin Ryzman
0 siblings, 0 replies; only message in thread
From: Benjamin Ryzman @ 2003-01-29 11:04 UTC (permalink / raw)
To: lartc
Hi,
My workstation is connected to a LAN with two different gateways. GW1 is
rate-limited to 2Mbps while GW2 is unlimited. Routing through GW1
is cheaper, thus I don't want to be using only GW2.
At any given time, I would like to be able to use GW1 while keeping it
uncongestioned and to use GW2 for the remaining traffic.
I know I can create a weighted multipath route but I believe the weight
doesn't allow me to specify the rate-limitation of GW1.
Do you think I can come to a solution using iproute2, netfilter and tc?
Regards,
Benjamin
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-01-29 11:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-01-29 11:04 [LARTC] Multipath routing with different bandwidth and cost Benjamin Ryzman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox