* [LARTC] Where Does 'ip monitor all' output go?
@ 2003-05-08 14:18 Carol Anne Ogdin
2003-05-08 17:49 ` Alexander Reelsen
2003-05-09 13:35 ` Carol Anne Ogdin
0 siblings, 2 replies; 3+ messages in thread
From: Carol Anne Ogdin @ 2003-05-08 14:18 UTC (permalink / raw)
To: lartc
Issue "ip monitor all". Watch nothing happen on the screen. Where does
the output of monitor go?
Also, does the " [ file FILE ]" option really exist for that command? I
notice that it is described in the "ip-cref" documentation, but "ip monitor
help" does not show it as an option.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] Where Does 'ip monitor all' output go?
2003-05-08 14:18 [LARTC] Where Does 'ip monitor all' output go? Carol Anne Ogdin
@ 2003-05-08 17:49 ` Alexander Reelsen
2003-05-09 13:35 ` Carol Anne Ogdin
1 sibling, 0 replies; 3+ messages in thread
From: Alexander Reelsen @ 2003-05-08 17:49 UTC (permalink / raw)
To: lartc
Hi
On Thu, May 08, 2003 at 07:18:46AM -0700, Carol Anne Ogdin wrote:
> Issue "ip monitor all". Watch nothing happen on the screen. Where does
> the output of monitor go?
It goes to standard out. The output are for example route changes (try on
one console ip monitor and on another ip route add/del and you will see).
You can monitor the state of devices,addresses and routes with "ip
monitor"...
It is not some sort of network monitor like tcpdump or somesuch.
MfG/Regards, Alexander
--
Alexander Reelsen http://tretmine.org
ref@tretmine.org
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [LARTC] Where Does 'ip monitor all' output go?
2003-05-08 14:18 [LARTC] Where Does 'ip monitor all' output go? Carol Anne Ogdin
2003-05-08 17:49 ` Alexander Reelsen
@ 2003-05-09 13:35 ` Carol Anne Ogdin
1 sibling, 0 replies; 3+ messages in thread
From: Carol Anne Ogdin @ 2003-05-09 13:35 UTC (permalink / raw)
To: lartc
On 05/08 @ 09:41 PM, Alexander Reelsen wrote:
>> Issue "ip monitor all". Watch nothing happen on the screen. Where does
>> the output of monitor go?
>It goes to standard out. The output are for example route changes (try on
>one console ip monitor and on another ip route add/del and you will see).
>You can monitor the state of devices,addresses and routes with "ip
>monitor"...
Thanks, Alexander. Just the explanation I needed. It makes sense, now.
--Carol Anne
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-05-09 13:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-05-08 14:18 [LARTC] Where Does 'ip monitor all' output go? Carol Anne Ogdin
2003-05-08 17:49 ` Alexander Reelsen
2003-05-09 13:35 ` Carol Anne Ogdin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox