Re: [LARTC] htb

[Evgeni Gechev <etg@setcom.bg>]

Stef Coene wrote:

> On Tuesday 13 May 2003 20:00, Evgeni Gechev wrote:
> > class htb 1000:10 root leaf 1010: prio 0 quantum 1600 rate 48Mbit ceil
> > 48Mbit burst 3Kb/8 mpu 0b cburst 63Kb/8 mpu 0b level 0
> >  Sent 17553816503 bytes 13078592 pkts (dropped 63733, overlimits 0)
> >  rate 730783bps 570pps backlog 112p
> >  lended: 13078480 borrowed: 0 giants: 0
> >  tokens: -589 ctokens: 7412
> >
> > Hi!
> >   Can somebody explain what is wrong from the above?
> > I can't understand following relation:
> > "rate 48Mbit ceil 48Mbit" and "rate 730783bps 570pps backlog 112p"
> > Why the current rate is limited to 730KByte/s (and there is backlog
> > 112p) when the rate and ceil are 48Mbit/s (6Mbyte/s)?
> rate 730783bps means that the average rate is 730783bps for that class.  And
> 570pps means that class sends 570 packets per seconds.  So it's just some
> statistics for that class.
> I'm not sure for the backlog, but I think it means that there are 112 packets
> in the queue ready to be send.
>
> > I sent similar question some months ago, but there was no answer.
> Satisfied ?  :)
>
> Stef
>
> --
>
> stef.coene@docum.org
>  "Using Linux as bandwidth manager"
>      http://www.docum.org/
>      #lartc @ irc.oftc.net
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Satisfied :)
But partially :(
The problem is that the bandwidth is REALLY limited to about 730kbps.
And isn't the backlog the number of packets, delayed due to bandwidth reached
the shaper limit?

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/