From: Stef Coene <stef.coene@docum.org>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Shaping only the interface bandwith
Date: Fri, 16 May 2003 09:16:39 +0000 [thread overview]
Message-ID: <marc-lartc-105307667715437@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105304709128962@msgid-missing>
On Friday 16 May 2003 03:05, Osgaldo Suanzes wrote:
> So I have been playing around a while with Tc, and something start to ring
> a bell.
> I managed to shape traffic for 5 Users on my Lan each with 24Kb download
> rate. (using HTB)
>
> Now my question is: Can I limit the bandwidth on ETH1 to 512k without
> specifying any end Users Ip or port (www,or smtp traffic)?.
> So that the first person conecting its Laptop to the Lan gets full
> Bandwidth, the next user conecting gets 50% and so on...
> I read that SFQ should do the trick but the Examples I have seen are
> based on match known Ip adresses so that it can fair qeue the request and
> everybody gets the same amount of bandwitdh
> Is there a workaround on SFQ for what I need?
> And if not what other ways do I have, CBQ, HTB, SFQ, ESFQ ???
You can use the esfq qdisc (see the faq page on www.docum.org for a link). It
works like a sfq, but you can specify how it split the data in different
queues. In your case, you can use the ip-address as hash key. So each
ip-addess has his own little queue.
> I need this because I need to implement this on different office where
> I dont know the Ip adresses of the people,
> But I have been asked to shape traffic to a specific amount of KB
> without carry much about who is using it, Is that possible?
>
> If so can someone point me to somewhere? Im quite desperate.
Or you can create a script that parses the ip-address from the router,
determines the network address and creates a htb class for each possible
ip-address. Not so difficult to do.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-05-16 9:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-16 1:05 [LARTC] Shaping only the interface bandwith Osgaldo Suanzes
2003-05-16 9:16 ` Stef Coene [this message]
2003-05-19 23:01 ` Osgaldo Suanzes
2003-05-20 19:47 ` Stef Coene
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105307667715437@msgid-missing \
--to=stef.coene@docum.org \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox