From: Stef Coene <stef.coene@docum.org>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Shaping only the interface bandwith
Date: Tue, 20 May 2003 19:47:03 +0000 [thread overview]
Message-ID: <marc-lartc-105346012719628@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105304709128962@msgid-missing>
On Tuesday 20 May 2003 01:01, Osgaldo Suanzes wrote:
> Hi again.
>
> Sorry for bugging you so much!
> But Im unable to add ESFQ to a HTB Class.
>
> #tc qdisc add dev eth1 root handle 1: htb
> #tc class add dev eth1 parent 1: classid 1:1 htb rate 512kbit ceil
> 512kbit burst 2k
Remove the burst parameter so htb calculates the minimum burst for you. 2k is
too low for burst.
> #tc qdisc add dev eth1 parent 1:1 handle 10: esfq
>
> The last line "is" probably completly Wrong!(dont know about the
> others) But I cant find an example on the net for this.
I think the line is ok. Did you get any errors ?
> I maybe need to add a filter, but how? and without matching Ip
> addresses.
If you want to put all traffic in 1:1 you can add default 1 if you add the htb
qdisc. This will redirect all non-classified traffic to clas 1:1.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2003-05-20 19:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-16 1:05 [LARTC] Shaping only the interface bandwith Osgaldo Suanzes
2003-05-16 9:16 ` Stef Coene
2003-05-19 23:01 ` Osgaldo Suanzes
2003-05-20 19:47 ` Stef Coene [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105346012719628@msgid-missing \
--to=stef.coene@docum.org \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox