Re: [LARTC] CBQ DEVICE BW?

[Srikanth <srikanth_w@naturesoft.net>]

[-- Attachment #1: Type: text/plain, Size: 1015 bytes --]

Thanks Stef,

I've customized ethtool source, it's giving the correct values depends 
on the real
physical I/F BW. (as per my requirements)

I need only speed from that.

Stef Coene wrote:

>>Forgive me, if i'm wrong.
>>
>>As of my understanding, are the below lines right?
>>
>>DEVICE BW = Real physical bandwidth of the device
>>
>>So, Here DEVICE means only the Interface, not the Link, am i right?
>>    
>>
>Yes.
>
>>&
>>
>>RATE = Rate assigned to perticular user/network/service.
>>
>>How much the user/network/service can aquire max. allowable rate?
>>    
>>
>Yes.  If you add the bounded parameter, you create a maximum for that class.
>
>>I can consider as 10/100 Mbps for ethernet interface.
>>So, how about, when i use ppp0 (pppoe) in my CBQ, is it same?
>>bcoz, pppoe uses eth0, am i right?
>>    
>>
>I'm not sure about that.  But I think you have to use the eth0 speed.
>Or use htb, no more bandwidth questions needed :)
>
Yah, from now onwards, no more DEVICE BW questions.

>Stef
>
>  
>
Srikanth.

[-- Attachment #2: Type: text/html, Size: 1635 bytes --]