From: Brad Lay <brad@coombabah.net>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] does tc support mpls ?
Date: Sat, 28 Jun 2003 05:51:14 +0000 [thread overview]
Message-ID: <marc-lartc-105677958906287@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105669822406875@msgid-missing>
On Fri, 27 Jun 2003, Nikolay Datchev wrote:
> I assume that your current ethernet card speed is 100 Mbit/s
>
> Just do
>
> mii-tool eth0 -A 10BaseT
Or you could do,
tc qdisc add dev ethX root tbf rate 10Mbit latency 50ms burst 1540
(I'm really not sure about latency and burst, because I usually have the
rate set at 220kbit. YMMV).
> -- Nikolay Datchev
>
> On Fri, 27 Jun 2003, olagoke Metibemu wrote:
>
> > HELLO ALL,
> > I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX.
> >
> > THANKS
> >
> > GOKE
> > NEWBIE
Regards,
Brad Lay ( brad /at/ coombabah.net )
W) http://coombabah.net/
"I used to be indecisive, now I'm not so sure."
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-06-28 5:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-27 7:42 [LARTC] does tc support mpls ? Ashutosh Pattanaik
2003-06-27 11:58 ` olagoke Metibemu
2003-06-27 12:48 ` Nikolay Datchev
2003-06-28 5:51 ` Brad Lay [this message]
2003-06-30 4:16 ` Srikanth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105677958906287@msgid-missing \
--to=brad@coombabah.net \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox