From: Srikanth <srikanth_w@naturesoft.net>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] does tc support mpls ?
Date: Mon, 30 Jun 2003 04:16:46 +0000 [thread overview]
Message-ID: <marc-lartc-105694660601362@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105669822406875@msgid-missing>
[-- Attachment #1: Type: text/plain, Size: 1391 bytes --]
>
>
>--__--__--
>
>Message: 2
>Date: Sat, 28 Jun 2003 15:51:14 +1000 (EST)
>From: Brad Lay <brad@coombabah.net>
>To: Nikolay Datchev <nik@varna.net>
>Cc: olagoke Metibemu <olagokemetibemu@yahoo.com>,
> Ashutosh Pattanaik <ashutosh.pattanaik@einfinitus.com>,
> lartc@mailman.ds9a.nl
>Subject: Re: [LARTC] does tc support mpls ?
>
>On Fri, 27 Jun 2003, Nikolay Datchev wrote:
>
>
>
>>I assume that your current ethernet card speed is 100 Mbit/s
>>
>>Just do
>>
>>mii-tool eth0 -A 10BaseT
>>
>>
>
>Or you could do,
>tc qdisc add dev ethX root tbf rate 10Mbit latency 50ms burst 1540
>
>(I'm really not sure about latency and burst, because I usually have the
>rate set at 220kbit. YMMV).
>
>
>
>>-- Nikolay Datchev
>>
>>On Fri, 27 Jun 2003, olagoke Metibemu wrote:
>>
>>
>>
>>>HELLO ALL,
>>>I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX.
>>>
>>>THANKS
>>>
>>>GOKE
>>>NEWBIE
>>>
>>>
>
>Regards,
>
>Brad Lay ( brad /at/ coombabah.net )
>
> W) http://coombabah.net/
>
>"I used to be indecisive, now I'm not so sure."
>
>--__--__--
>
>
>
You can use ethtool to set your ethernet speed, by using the following
command
ethtool -s ethX [speed 10|100|1000] [duplex half|full]
ethtool is available over the Web on the SourceForge site at
http://sourceforge.net/projects/gkernel/
-Srikanth.
[-- Attachment #2: Type: text/html, Size: 2470 bytes --]
prev parent reply other threads:[~2003-06-30 4:16 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-27 7:42 [LARTC] does tc support mpls ? Ashutosh Pattanaik
2003-06-27 11:58 ` olagoke Metibemu
2003-06-27 12:48 ` Nikolay Datchev
2003-06-28 5:51 ` Brad Lay
2003-06-30 4:16 ` Srikanth [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105694660601362@msgid-missing \
--to=srikanth_w@naturesoft.net \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox