[LARTC] BGP with LARTC

[LARTC] BGP with LARTC

[hare ram]

Hi all

iam trying to Deploy BGP with Linux BOX

i have 3 provider, i want to take the Full-Routing from them

what is best PC configuration, required for this setup

Some expert put coment on this will be Good

or any resource URLs will be thanks

regards
hare

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] BGP with LARTC

[Lukasz Bromirski]

Witam,

hr> iam trying to Deploy BGP with Linux BOX

hr> i  have  3  provider, i want to take the Full-Routing from them what is
hr> best PC configuration, required for this setup

Take  as  fast  processor and as much memory you can - it's cheap. I've had
some  machines  with anything from PIII550 and 256MB RAM to AMD Athlon 1Ghz
with 2GB running zebra and everything was OK.

Take time to tune your zebra, and preferably - install & make from CVS. For
the BGP and routing, good sources are:

http://info.connect.com.au/docs/routing/general/multi-faq.shtml
http://joe.lindsay.net/bgp.html
www.bgp4.as
www.cisco.com
www.zebra.org

...and of course www.google.com as usual.

-- 
£ukasz Bromirski                                lbromirski[at]mr0vka.eu.org
PGP key http://mr0vka.eu.org/pgp.asc                   http://mr0vka.eu.org
PGP finger               5C3B 723F A1FA A2BA E57A  E959 62A8 63C2 093B 6C49

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/