From: "Catalin Borcea" <catalin@electricant.ambra.ro>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] OUTPUT chain marking after or before routing?
Date: Thu, 17 Jul 2003 06:31:11 +0000 [thread overview]
Message-ID: <marc-lartc-105842436128283@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105842045025983@msgid-missing>
Hello,
I tried to mark the packets in the PREROUTING chain but still doesn't work.
Now the packets are no marked anymore when they go out by the eth2
interface. When I marked them in the OUTPUT chain they arrived also to the
eth2 interface but marked. According to the docs the PREROUTING chain is not
traversed by locally generated packets so, I don't know how this works for
you. Maybe you have forwarded packets and not locally generated packets.
- catalin -
----- Original Message -----
From: "???????? ?????" <skekes@pylones.gr>
To: "Catalin Borcea" <catalin@electricant.ambra.ro>
Cc: <lartc@mailman.ds9a.nl>
Sent: Thursday, July 17, 2003 9:04 AM
Subject: Re: [LARTC] OUTPUT chain marking after or before routing?
> Hello dear Catalin,
> Well the only mistake you made is that you placed hte mark filters on
> the output of the interface.
> I suggest you to park them in the PREROUTING chain and not in the
> output. It works fine to me.
> Best regards
> Stamatis
> Catalin Borcea wrote:
>
> >Hello,
> >I have a Linux box with 3 network adapters:
> >eth0 : IP:10.200.0.1/24
> >eth1/ppp0: IP:80.97.105.98
> >eth2 : IP:192.168.1.100/24
> >
> >I want that all the Internet traffic goes to the eth2 interface except
the
> >smtp traffic that I want to go to the ppp0 interface. The main routing
table
> >is:
> >172.16.20.1 dev ppp0 proto kernel scope link src 80.97.105.98
> >192.168.1.0/24 dev eth2 scope link
> >10.200.0.0/24 dev eth0 scope link
> >192.168.254.0/24 dev eth1 scope link
> >127.0.0.0/8 dev lo scope link
> >default via 192.168.1.1 dev eth2
> >
> >
> >I decided to use netfilter to mark the packets that leave the gateway
from
> >and to the smtp port. I do this in the OUTPUT chain of the mangle table.
So,
> >according to the docs, the marking will occur before routing for locally
> >generated packets:
> >
> >$IT -t mangle -A OUTPUT -p tcp --dport smtp -j MARK --set-mark 2
> >$IT -t mangle -A OUTPUT -p tcp --sport smtp -j MARK --set-mark 2
> >
> >Then I define a new routing table (named "smtp") and a rule to redirect
smtp
> >packets to this table. The output of "ip rule ls" is:
> ># 0: from all lookup local
> ># 32765: from all fwmark 2 lookup smtp
> ># 32766: from all lookup main
> ># 32767: from all lookup 253
> >
> >In table "smtp" I defined a default route by the dev ppp0. The output of
"ip
> >route ls table smtp" is:
> ># default dev ppp0
> >
> >When I try to connect to a smtp port somewhere in the Internet, tcpdump
show
> >me that these packets go to the eth2 interface (the main table default
> >route). I don't know where is my mistake but it seems that the marking in
> >the OUTPUT chain occurs AFTER and not BEFORE routing. Is this a correct
> >behaviour? How can I solve my problem? Please help!
> >
> >TIA
> >- catalin -
> >
> >
> >_______________________________________________
> >LARTC mailing list / LARTC@mailman.ds9a.nl
> >http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
> >
> >
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
next prev parent reply other threads:[~2003-07-17 6:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-17 5:37 [LARTC] OUTPUT chain marking after or before routing? Catalin Borcea
2003-07-17 6:04 ` ???????? ?????
2003-07-17 6:31 ` Catalin Borcea [this message]
2003-07-17 6:37 ` ???????? ?????
2003-07-17 7:15 ` Catalin Borcea
2003-07-17 7:32 ` ???????? ?????
2003-07-17 14:08 ` Chijioke Kalu
2003-07-17 15:55 ` Martin A. Brown
2003-07-17 16:50 ` lartc
2003-07-18 5:04 ` Catalin Borcea
2003-07-18 18:41 ` Martin A. Brown
2003-07-18 18:46 ` Martin A. Brown
2003-07-19 7:45 ` lartc
2003-07-20 15:19 ` Leonardo Balliache
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-105842436128283@msgid-missing \
--to=catalin@electricant.ambra.ro \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox